2003 Jeep Wrangler Suspension Parts

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.

Product Features:

• Cost-effective repair – this coil spring bracket allows repair of the damaged frame section and mount
• Durable materials – carbon steel mount is coated in weldable primer for a clean weld-on repair
• Vehicle and position specific – designed to match original mounts on Jeep vehicles
• Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

CONTROL ARM

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Upper
• Metal Outer Rubber Inner
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Suspension Trailing Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

• Bushings included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance INSTALLATION NOTE: It is recommended by the manufacturer that trailing arms be replaced in pairs.

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge.

Product Features:

• Heavy Duty Replacement For The Failure Prone Factory Mounts
• Plated Steel Construction Will Ensure Long Lasting Performance Even With The Most Rigorous Off Road Use
• Slotted Cam Bolt Design Will Allow You To Dial In The Front Caster And Improve Overall Ride Quality

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

2.0 Perf Shock

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Specifically engineered to provide better handling, control and performance for light trucks and SUVs, Monroe® Reflex® monotube shocks feature a high-pressure gas to provide additional spring rate, helping to maximize damping efficiency and control.

Product Features:

• MAINTAINS VEHICLE CONTROL — Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
• IMPROVED IMPACT ABSORPTION — Hydraulic lock-out isolates suspension impact and helps maintain vehicle integrity (where applicable)
• CONSISTENT RIDE — High temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• EXCELLENT RESPONSE AND STABILITY — High-pressure nitrogen charge provides a quicker response for excellent vehicle control
• BUILT TO LAST — High-strength shock housing and hardened, chrome-plated piston rod provide durability and longer service life
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• REDUCED SHOCK FADE AND AERATION — Free floating dividing piston separates shock fluid from high-pressure gas charged to reduce shock fade and aeration

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Lasts from 3 to 10 Times Longer
• Assemble to Chassis Same Way as OEM
• Maintains Factory Ride Characteristics
• Simple Way to Increase Vehicle Height

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Many aftermarket lift kits use the OEM coil isolator which causes the front coil springs to flex outward and rub against the suspension. This could eventually cause a catastrophic failure of your suspension. Daystar Coil Isolator replaces the OEM coil isolator and corrects this issue eliminating the premature wear of your suspension system.

Product Features:

• Corrects Spring Geometry On Aftermarket Coils
• Replaces The OEM Style Isolator With Durable Polyurethane Mount
• Maintains Stability Control
• FMVSS126 Compliant
• Made In The USA

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Helps Prevent Damage to Control Arm

Suffering uneven tyre wear, unbalanced braking or a less predictable front end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.

This SES Suspension upgrade fits the front suspension of a Jeep Wrangler TJ, JK and JL. Each laser-cut piece of steel is precision welded and powder-coated to ensure a quality fit. We have engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs (weight from a snowplow or heavy aftermarket accessories ¿ such as a steel bumper) the harder they work to prevent front-end sag. This SES Suspension Upgrade replaces the jounce stop inside the coil spring. Its unique design ensures superb ride quality ¿ loaded or unloaded. (There should be a 0.5 Inch to 1 Inch gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Cushion Road Shocks
• Simple And Easy To Install

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic light trucks and vans
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Rancho® bushing kits are available in a high-grade polyurethane, for a variety of shock and leaf-spring applications

Product Features:

• Available as a direct fit replacement
• Durable high-grade polyurethane
• Kit may contain mount, bushings and other mounting hardware (as applicable)
• Easy installation
• Each kit sold separately

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

POWER STEERING FLUID

Once installed, this set of red bushings provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you n

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

Designed by a dedicated team of Jeep enthusiasts, the ORV suspension program is one of the most complete programs available. We have looked at each application in detail to provide the very best and most complete solution for your specific Jeep model. Sin

Product Features:

• Black Powder Coated
• 2 in. Lift
• Smooth Ride
• Direct Fit
• Limited 5 Year Warranty

Designed to improve the ride, Rancho® adjustable control arm kits are for a stock or lifted Jeep® Wrangler TJ/Cherokee XJ (up to 4-in.). Made of heavy tubing, they feature Rancho’s D2 maintenance-free bushings for reduced noise, vibration and harshness.

Product Features:

• COMPATIBILITY — Designed for stock and lifted (up to 4-in.) Jeep Wrangler TJ and Cherokee XJ
• MAINTENANCE-FREE BUSHINGS — Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
• IMPROVES RIDE — Reduces noise, vibration and harshness for improved ride quality
• ADJUSTABLE — Allows adjustment of caster and pinion angles
• RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
• ENGINEERED TO LAST — 1.25-In. OD diameter bar upper arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
• EASY TO INSTALL — Includes two preassembled control arms for easy installation