2003 Jeep Wrangler Air Suspension and Kits

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

MasterBshKt

MasterBshKt

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

Once installed, this set of red bushings provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you n

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

Once installed, this red bushing kit provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you need

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Max Performance Synthetic Power Steering Fluid

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Get your 4-door Jeep® Wrangler JK ready for a day on the trail with the Rancho® 2-in. Progressive Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• COMPATIBILITY — Designed for 4-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming, bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Kit includes four Rancho RS9000®XL shocks, front and rear progressive rate coil springs, front bump stops, rear brake line brackets and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires, using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Daystar lift and leveling kits raise your vehicle, while working within the factory suspension design. Daystar kits offer an improved ride, more ground clearance, and the ability to run larger tires and wheels, while reducing Noise, Vibration, and Harmonics (NVH).

Product Features:

• Kevlar(R) Infused Polyurethane Spacers
• Extended Bump Stops
• Lower Control Arms
• Sway Bar Links
• No Metal On Metal Contact
• Easy Install, No Weld Design

Skyjacker(R) Suspensions is bigger and better than ever offering Leveling kits, Sport lifts and Suspensions kits. For 40 years Skyjacker(R) has proven to be the innovator in the suspension market. This commitment to cutting-edge technology has enabled Skyjacker to deliver a huge selection of products to you, our customers.

Product Features:

• Made From Premium Materials
• Meets The Highest Quality Standards
• Provide A Smooth, Comfortable Ride
• Maintain That Factory Ride Quality
• Easy Installation

Get your 2-door Jeep® Wrangler JL ready for a day on the trail with the Rancho® 3-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• ORDERING INFO — Box 1 of 2 for master kit RS66121BR9, must order RS66121BR9-1 and RS66121BR9-2 for a complete kit
• COMPATIBILITY — Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires, aftermarket bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• NOTES — Compatible with Jeep factory electronic stability system, allows the use of OE wheels and tires (tire size varies between manufacturers)

This 3-piece manual transmission shift lever relocation bracket kit from Rugged Ridge relocates the shift lever when used with the 18303.11 3-inch body lift kit.

Product Features:

• Adapter To Fit 6-Speed Transmission

Daystar lift and leveling kits raise your vehicle, while working within the factory suspension design. Daystar kits offer an improved ride, more ground clearance, and the ability to run larger tires and wheels, while reducing Noise, Vibration, and Harmonics (NVH).

Product Features:

• Kevlar(R)-Infused Polyurethane Spacers
• Extended Bump Stops
• No Metal On Metal Contact
• Easy Install, No-Weld Design

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• ORDERING INFO –Box 2 of 2for master kitRS66124BR9, must order RS66124BR9-1 and RS66124BR9-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding and on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progress rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility while Dynamic Rebound Spring (DRS) delivers additional control
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Designed to deliver increased ground clearance, the Rancho® 4-in. short arm lift kit delivers the ultimate on- and off-road experience for the Jeep® Wrangler JK. The progressive rate coil springs and adjustable control arms provide comfort and durability.

Product Features:

• ORDERING INFO — Box 2 of 3 for master kit RS66114B, must order RS66114B-1, RS66114B-2 and RS66114B-3 for a complete kit
• COMPATIBILITY — Designed for 2-door and 4-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 37-in. tires, get 4-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
• COMPLETE SOLUTION — Kit includes front and rear progressive rate coil springs, upper and lower control arms, heavy-duty front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
• MAINTENANCE-FREE BUSHINGS — Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs are specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• REQUIREMENTS — Rancho exhaust cross over pipe (RS720003) or DynoMax® exhaust cross over pipe (88347) is required for 2012-2018 models when not replacing the front driveshaft, sold separately
• NOTES — Tire size varies between manufacturers, aftermarket bumpers, sliders, winches, etc. affect height

Designed to deliver increased ground clearance, the Rancho® 4.5-in. short arm lift kit delivers the ultimate on- and off-road experience for the Jeep® Wrangler JL. Progressive rate coil springs and adjustable control arms provide comfort and durability.

Product Features:

• ORDERING INFO — Box 3 of 3 for master kit RS66125B, must order RS66125B-1, RS66125B-2 and RS66125B-3 for a complete kit
• COMPATIBILITY — Designed for Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 37-in. tires, get 4.5-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
• COMPLETE SOLUTION — Kit includes front and rear corner-specific progressive rate coil springs, upper and lower control arms, HD front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
• MAINTENANCE-FREE BUSHINGS — Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• REQUIREMENTS — If using Rancho RS55067 or RS999067 shocks with Dynamic Rebound Spring, aftermarket driveshaft is required for max front axle articulation, front RS55065 or RS999065 do not require an aftermarket driveshaft, sold separately
• NOTES — Tire size varies between manufacturers, aftermarket bumpers, sliders, winches, etc. affect height

Spacer Lift Kit- 1.7

Designed to deliver increased ground clearance, the Rancho® 4.5-in. short arm lift kit delivers the ultimate on- and off-road experience for the Jeep® Wrangler JL. Progressive rate coil springs and adjustable control arms provide comfort and durability.

Product Features:

• ORDERING INFO — Box 2 of 3 for master kit RS66125B, must order RS66125B-1, RS66125B-2 and RS66125B-3 for a complete kit
• COMPATIBILITY — Designed for Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 37-in. tires, get 4.5-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
• COMPLETE SOLUTION — Kit includes front and rear corner-specific progressive rate coil springs, upper and lower control arms, HD front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
• MAINTENANCE-FREE BUSHINGS — Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• REQUIREMENTS — If using Rancho RS55067 or RS999067 shocks with Dynamic Rebound Spring, aftermarket driveshaft is required for max front axle articulation, front RS55065 or RS999065 do not require an aftermarket driveshaft, sold separately
• NOTES — Tire size varies between manufacturers, aftermarket bumpers, sliders, winches, etc. affect height

Skyjacker new lift systems for the NEW Jeep Wrangler JL and Rubicon feature DUAL RATE-LONG TRAVEL coil springs designed specifically for the JL to ensure superb highway ride quality and performance on any terrain – whether on-road or for off-road use. Choose your preference from either M95 Monotube or Black Max Front and Rear Long Travel shocks for proper suspension and ride control of the new Wrangler JL. 3.5 to 4 Inch Lift Systems include all of the above as well as Front Adjustable Track Bar (no pitman arm required) for the proper required steering geometry and axle centering, Eccentric Cam Bolts and Rear Upper frame mounted Track Bar Relocation bracket.

Product Features:

• The DUAL RATE-LONG TRAVEL Coil Springs Offers The Best Of Both Worlds From The Street To The Trail! The 1st Spring Rate Offers An Exceptional Highway Ride
• The Coils Will Expand When Off-Roading During Articulation As The Suspension Droops To Keep The Tires In Contact With The Ground Much Longer Than A Single Rate Coil
• This Results In A Smoother Ride While Maintaining The Coil In The Upper Coil Bucket Even At Full Droop
• The 2nd Rate (Lower Coils) Only Engage After Compression Past The 1st Rate, This Second Rate Allows Consistent Control And Stability During Body Roll And Heavy Off-Road Suspension Movement
• Systems Feature Extended Sway Bar End Links Which Allow For Full Droop And Long Travel As Well As Bump Stop Extensions To Make Sure The Suspension Clears The Tires At Bump
• Long Travel Front And Rear Shocks Are Length Fitted To Offer The Maximum Extension Allowable For Full Articulation To Complete This Total Package
• Lift Kit Suspension Include, Front And Rear Dual Rate, Long Travel Coil Springs: Adjustable And High-Angle Front Track Bar
• Lift Kit Suspension Include, Rear Track Bar Extension Bracket: Front And Rear Eccentric Cam Bolts: Front And Rear Extended Sway Bar End Links: Front And Rear Bump Stop Extensions
• Lift Kit Suspension Include, Front And Rear Black MAX Or M95 Monotube Long Travel Shocks :Grade 8 Mounting Hardware