2003 Ford F-150 Belts and Hoses

Essential Belts and Hoses for 2003 Ford F-150s

Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)

Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose

from

$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Fuel Filler Neck Hose (Part No.573-011)

Fuel Filler Neck Hose

from

$81.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
  • Durable construction – made of fuel-resistant materials to reduce future failure potential.
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Mitsuboshi – Drive Belt (Part No.W1000164518MBL)

Drive Belt

from

$37.56
Drive Belt

Dorman – Engine Heater Hose Assembly (Part No.626-597)

Engine Heater Hose Assembly

from

$30.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Gates – Premium Molded Coolant Hose (Part No.20168)

Premium Molded Coolant Hose

from

$31.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.19219)

Premium Molded Heater Hose

from

$41.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Motorcraft – PCV Hose (Part No.B2150671614MTR)

PCV Hose

from

$31.95
The Motorcraft PCV Hose is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • OES replacement part for your vehicle’s original factory component
  • Offering the quality, reliability, and durability of OES
  • Manufactured to OES specification for fit, form, and function
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999358A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$82.99
Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. The Litens product meets all original equipment form, fit, and function specifications for Ford 2.4L van and truck applications with A/C. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: This part meets the Original Equipment specification which calls for steel pulley and a sophisticated pivot design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring, and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Gates – Premium Molded Coolant Hose (Part No.20705)

Premium Molded Coolant Hose

from

$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Poly Rib Belt Serpentine Belt; 53.54 Long, 6 Rib Count (Part No.5060535)

Poly Rib Belt Serpentine Belt; 53.54 Long, 6 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Spectra Premium – Fuel Filler Hose (Part No.FNH009)

Fuel Filler Hose

from

$47.99
Spectra Premium filler neck hoses are engineered, developed and validated by our in-house team of Canadian engineers ensuring it meets or exceeds the OE specifications.

Product Features:
  • Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
  • OE design to ensure exact fit, form and function
  • Fit tested to ensure ease of installation for the application it was intended for
  • Part is tested to ensure it meets the same requirements as OE specifications
  • Compatible with all fuel types it’s designed for
  • Includes necessary clamps for a complete installation solution
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.25" Inside Diameter (Sold by foot) (Part No.28407)

Straight Heater Hose: EPDM, Direct Fit, 0.25" Inside Diameter (Sold by foot)

from

$0.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Premium Molded Coolant Hose (Part No.20662)

Premium Molded Coolant Hose

from

$19.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Litens – Serpentine Belt Drive Component Kit (Part No.LV999544H)

Serpentine Belt Drive Component Kit

from

$173.99
This Litens Serpentine Belt Drive Component Kit fits 2005-2014 Ford Expedition, Explorer, F-150, F-250, F-350 / Mercury Mountaineer / Lincoln Navigator w/4.6/5.4L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • All-in-one solution to get the whole job done right the first time!
  • Eliminate the guess-work by repairing the whole system.
  • Front end accessory drive components wear together. Replace all of the components for added piece of mind.
  • A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
  • Worn tensioners and idlers can cut belt life in half.
See More

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999544J)

Kit de courroie d'entrainement accessoire

from

$161.99
This Litens Serpentine Belt Drive Component Kit fits 2007-2009 Ford Expedition, F-150, F-250, F-350 / Lincoln Navigator w/4.6/5.4L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.25" Long, 1.50" Diameter (Part No.E71146)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.25" Long, 1.50" Diameter

from

$29.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26504)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$30.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth

from

$30.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – V-Belt Idler/Tensioner Pulley; Steel, 94mm Dia., 16.4mm Width, Grooves (Part No.89020)

V-Belt Idler/Tensioner Pulley; Steel, 94mm Dia., 16.4mm Width, Grooves

from

$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38053)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$36.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 37 mm Smooth (Part No.89016)

Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 37 mm Smooth

from

$25.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter

from

$33.49
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.
See More

Litens – Idler Pulley: Direct Fit, Steel, 87mm Diameter (Part No.900598A)

Idler Pulley: Direct Fit, Steel, 87mm Diameter

from

$40.49
This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.
See More

Litens – Idler Pulley: Direct Fit, Steel, 94mm Diameter (Part No.900048A)

Idler Pulley: Direct Fit, Steel, 94mm Diameter

from

$28.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 88.8 mm Diameter (Part No.419-675)

Idler/Tensioner Pulley: Specific Fit, Steel, 88.8 mm Diameter

from

$39.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Upgrade your 2003 Ford F-150 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2003 Ford F-150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your F-150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 125 Belts and Hoses for the 2003 Ford F-150, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Belt Tensioners upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2003 Ford F-150 at great prices. Our Belts and Hoses inventory for this model ranges from just $0.99 to $181.99, with an average price of $52.89. Our 125 Belts and Hoses in stock come from 14 trusted brands, so you’re sure to find the right part for your 2003 Ford F-150 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Ford F-150, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $21.29 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $23.99, and at an average 5 stars rating. With 31,610 customer reviews and counting, our 2003 Ford F-150 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Ford F-150 is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 in top shape, all in one place. Start shopping confidently below for your 2003 Ford F-150!

Best-Selling Engine Cooling Hoses for 2003 Ford F-150s

Enhance the driving experience in your Ford with 7 quality Engine Cooling Hose components, starting at $21.99.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.50" Long, 1.75" Diameter (Part No.E71898)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.50" Long, 1.75" Diameter

from

$21.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.75" Diameter (Part No.E71899)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.75" Diameter

from

$65.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 1.75" Diameter (Part No.E71901)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 1.75" Diameter

from

$55.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.72" Diameter (Part No.E71963)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.72" Diameter

from

$60.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.72" Diameter (Part No.E72698)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.72" Diameter

from

$65.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Motorcraft – Motorcraft Radiator Hose (Part No.G2000456654MTR)

Motorcraft Radiator Hose

from

$83.98
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:
  • Pre-shaped hose allows easy installation
  • Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
  • Recommended by Ford Motor Company
See More

Gates – Premium Modular Coolant Hose (Part No.22299)

Premium Modular Coolant Hose

from

$76.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Popular 2003 Ford F-150 Belt Tensioners

Customize your Ford with 10 Belt Tensioners products like Belt Tensioner Assemblies, all priced under $171.45.

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89263)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$53.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999544A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$62.99
Litens was the Original Equipment (O.E.) supplier of this Ford /Lincoln tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with a lift feature to assist in raising and lowering the tensioner during belt removal and installation as well as a heavy duty steel pulley. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89260)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$81.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999266A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$70.99
Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This Litens aftermarket product meets all original equipment form, fit, and function specifications for this General Motors tensioner. (*OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) The Litens aftermarket part has a black-coated pulley bolt versus the silver bolt used on the OE part. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999604A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$117.99
Litens was the Original Equipment (O.E.) suppliers of this Ford /Lincoln tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed for Super Duty applications with a heavy duty steel pulley and an integrated lift feature molded into the tensioner arm to aid in belt removal and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999358A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$82.99
Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. The Litens product meets all original equipment form, fit, and function specifications for Ford 2.4L van and truck applications with A/C. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: This part meets the Original Equipment specification which calls for steel pulley and a sophisticated pivot design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring, and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001373689MTR)

Accessory Belt Tensioner Assembly

from

$128.79
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001374170MTR)

Accessory Belt Tensioner Assembly

from

$98.34
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Dayco – Automatic Belt Tensioner (Part No.89305)

Automatic Belt Tensioner

from

$67.99
Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. This specific Dayco Automatic Belt Tensioner is manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life. This tensioner contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation. The patented Deflected Arm Plate dampens arm movement, prolonging the life of the tensioner by limiting the amount of rotational movement.

Product Features:
  • Manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension
  • Contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation
  • The patented Deflected Arm Plate dampens arm movement, prolonging the life of the tensioner by limiting the amount of rotational movement
See More

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001373658MTR)

Accessory Belt Tensioner Assembly

from

$171.45
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Top Picks for 2003 Ford F-150 Heater Hoses

Upgrade Ford F-150s with top-quality Heater Hoses parts, including 22 OEM and aftermarket selections for your 2003 model.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter

from

$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (Part No.87793)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length

from

$45.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (Part No.87756)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length

from

$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dorman – Molded Heater Hose: Steel (Part No.626-221)

Molded Heater Hose: Steel

from

$57.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

90 Degree Molded Heater Hose: Steel, Direct Replacement

from

$28.49
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Molded Heater Hose: Steel (Part No.626-517)

Molded Heater Hose: Steel

from

$49.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Molded Heater Hose: Rubber (Part No.626-219)

Molded Heater Hose: Rubber

from

$39.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)

Quick-Lok½ Heater Hose Connector

from

$19.49
Product Features:
  • Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
  • Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
  • Fit just as the OEM quick connects for easy installation as well as removal
See More

Dorman – Coolant Fitting (Part No.626-571)

Coolant Fitting

from

$12.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Molded Heater Hose: Aluminum (Part No.626-558)

Molded Heater Hose: Aluminum

from

$27.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Molded Heater Hose: Steel (Part No.626-211)

Molded Heater Hose: Steel

from

$113.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 21 Inch Length (Part No.87753)

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 21 Inch Length

from

$60.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (Part No.87754)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length

from

$34.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dorman – Engine Heater Hose Assembly (Part No.626-222)

Engine Heater Hose Assembly

from

$41.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Molded Heater Hose: Rubber (Part No.626-218)

Molded Heater Hose: Rubber

from

$96.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Molded Heater Hose: Steel (Part No.626-567)

Molded Heater Hose: Steel

from

$44.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Molded Heater Hose: Rubber (Part No.626-608)

Molded Heater Hose: Rubber

from

$91.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dayco – Dayco, Heater Hose (Part No.R30301213042DAY)

Dayco, Heater Hose

from

$36.56
Dayco, Heater Hose

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 9 Inch Length (Part No.87864)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 9 Inch Length

from

$21.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Molded 90 Degree Heater Hose (Part No.28469)

Molded 90 Degree Heater Hose

from

$18.99
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.19219)

Premium Molded Heater Hose

from

$41.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Heater Hose Connecto (Part No.R30361329114DOR)

Heater Hose Connecto

from

$11.24
Heater Hose Connecto

In-Demand Serpentine and V Belts for 2003 Ford F-150s

Select from 37 premium Serpentine and V Belts parts for your 2003 Ford F-150, with prices ranging from $23.99 to $146.99.

Dayco – Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (Part No.5080990)

Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty

from

$56.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K060795HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$51.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth

from

$30.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count (Part No.5060795)

Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count

from

$39.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (Part No.5061030)

Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count

from

$53.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count (Part No.990K6)

Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count

from

$43.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count (Part No.1030K6)

Poly Rib Belt Serpentine Belt; 103 Long, 6 Rib Count

from

$30.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count (Part No.795K6)

Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count

from

$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count (Part No.5060990)

Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count

from

$66.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 96.85 Long, 6 Rib Count (Part No.968K6)

Poly Rib Belt Serpentine Belt; 96.85 Long, 6 Rib Count

from

$57.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 96.85 Long, 6 Rib Count (Part No.5060968)

Poly Rib Belt Serpentine Belt; 96.85 Long, 6 Rib Count

from

$64.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty (Part No.990K8)

Poly Rib Belt HD Serpentine Belt; 99.02 Long, 8 Rib Count, Heavy Duty

from

$61.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 28.2mm Width, 6 Grooves (Part No.89012)

Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 28.2mm Width, 6 Grooves

from

$23.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 99.65" Long, 8 Rib Count, Exact Fit (Part No.K080991HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 99.65" Long, 8 Rib Count, Exact Fit

from

$85.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 99.625" Long, 6 Rib Count, Exact Fit (Part No.K060990HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 99.625" Long, 6 Rib Count, Exact Fit

from

$73.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 66.25 Long, 8 Rib Count, Heavy Duty (Part No.5080663)

Poly Rib Belt HD Serpentine Belt; 66.25 Long, 8 Rib Count, Heavy Duty

from

$43.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130 DegreeC (266 DegreeF)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999544B)

Kit de courroie d'entrainement accessoire

from

$115.99
This Litens Serpentine Belt Drive Component Kit fits 2002-2010 Ford E-150, Excursion, F-150, F-250, F-350, F-450, F-550 Super Duty w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K061031)

Micro-V« Serpentine Drive Belt

from

$48.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Litens – Serpentine Belt Drive Component Kit (Part No.LV999544C)

Serpentine Belt Drive Component Kit

from

$146.99
This Litens Serpentine Belt Drive Component Kit fits 2002-2005 Ford E-450, Excursion, F-150, F-350 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Mitsuboshi – Drive Belt (Part No.W1000164518MBL)

Drive Belt

from

$37.56
Drive Belt

Bando – Multi Rib (Serpentine) Belt (Part No.W100081303BAN)

Multi Rib (Serpentine) Belt

from

$42.11
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060990)

Micro-V« Serpentine Drive Belt

from

$56.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000323034CON)

Multi Rib (Serpentine) Belt

from

$43.53
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060966)

Micro-V« Serpentine Drive Belt

from

$57.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 103.67" Long, 6 Rib Count, Exact Fit (Part No.K061031HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 103.67" Long, 6 Rib Count, Exact Fit

from

$55.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080991)

Micro-V« Serpentine Drive Belt

from

$37.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Serpentine Belt (Part No.W1000164151DAY)

Poly Rib Serpentine Belt

from

$74.32
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060795)

Micro-V« Serpentine Drive Belt

from

$39.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Worldpac – DRIVE BELT (Part No.W10001685200GAT)

DRIVE BELT

from

$130.59
DRIVE BELT

Bando – Drive Belt (Part No.W10002440777BAN)

Drive Belt

from

$67.86
Drive Belt

Mitsuboshi – Drive Belt (Part No.W1000200996MBL)

Drive Belt

from

$63.63
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Drive Belt (Part No.W10002440815BAN)

Drive Belt

from

$56.43
Drive Belt

Dayco – Heavy Duty Serpentine Belt; 66.25 Long, 8 Rib Count (Part No.5080663SC)

Heavy Duty Serpentine Belt; 66.25 Long, 8 Rib Count

from

$54.99
Developed using real-world track data, the Dayco supercharger belt is engineered with a proprietary EPDM construction with aramid cords and either 8 or 10 ribs depending on application. This belt is designed for late model high-performance supercharged street cars like ZR1 Corvettes, Shelby Mustangs and SRT Hellcat applications and is part of a line of racing belts engineered to provide maximum performance under the most extreme conditions. Comprised of specially blended compounds that are application specific, these belts are some of the strongest, most flexible belts on the market today.

Product Features:
  • Aramid fiber loaded EPDM construction and high stiffness PET cords eliminate belt stretch 
  • Proven to provide extreme durability and reduced slip under high boost conditions 
  • Tested by top level Drag Pak competitors, including Watson Racing, using roots style superchargers 
See More

Mitsuboshi – Drive Belt (Part No.W1000285893MBL)

Drive Belt

from

$48.91
Drive Belt

Bando – Drive Belt (Part No.W10002440805BAN)

Drive Belt

from

$48.69
Drive Belt

Bando – Drive Belt (Part No.W10002440761BAN)

Drive Belt

from

$45.37
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Most Sold 2003 Ford F-150 Fuel Hoses

Explore our best-selling Ford parts for the 2003 F-150 among 2 OEM and aftermarket options starting from $47.99.

Spectra Premium – Fuel Filler Hose (Part No.FNH009)

Fuel Filler Hose

from

$47.99
Spectra Premium filler neck hoses are engineered, developed and validated by our in-house team of Canadian engineers ensuring it meets or exceeds the OE specifications.

Product Features:
  • Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
  • OE design to ensure exact fit, form and function
  • Fit tested to ensure ease of installation for the application it was intended for
  • Part is tested to ensure it meets the same requirements as OE specifications
  • Compatible with all fuel types it’s designed for
  • Includes necessary clamps for a complete installation solution
See More

Dorman – Fuel Filler Neck Hose (Part No.573-011)

Fuel Filler Neck Hose

from

$81.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
  • Durable construction – made of fuel-resistant materials to reduce future failure potential.
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Top-Rated Belts and Hoses Brands For Your 2003 Ford F-150

Shop for the best-rated brands offering Belts and Hoses and other products for your 2003 Ford F-150s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2003 F-150 start at just $21.29 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2003 Ford F-150 Belts and Hoses

When it comes to maintaining or upgrading your 2003 Ford F-150, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2003 Ford F-150. With over 35 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.29, with an average price of just $45.07. Plus, with over 1,470 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length
from
$34.99
This product is not rated

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length

“”

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 21 Inch Length
from
$60.99
This product is not rated

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 21 Inch Length

“”

Dayco, Acc. Belt Idler Pulley
from
$21.68
This product is not rated

Dayco, Acc. Belt Idler Pulley

“”

Popular Litens 2003 Ford F-150 Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2003 Ford F-150 owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2003 F-150, Advance Auto Parts carries a full inventory of 14 Litens Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Litens Belts and Hoses range from $23.99 to $146.99, plus, with more than 118 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Kit de courroie d'entrainement accessoire
from
$115.99
This product is not rated

Kit de courroie d’entrainement accessoire

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$117.99
This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$82.99
This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 2003 Ford F-150 Belts and Hoses

Which Belts and Hoses are best-sellers for 2003 Ford F-150s?

Out of 125 Belts and Hoses that fit 2003 Ford F-150s, the following parts are the top sellers:

What’s the price range for 2003 Ford F-150 Belts and Hoses?

Belts and Hose prices for the 2003 Ford F-150 start at $0.99 and go up to $181.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2003 Ford F-150?

The average price for Belts and Hoses for the 2003 Ford F-150 is $52.89. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford F-150 model years?

Yes, we currently carry Belts and Hoses for 32 model years of Ford F-150s between 1977 and 2025. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2003 Ford F-150?

The cheapest 2003 Ford F-150 Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2003 Ford F-150?

Out of 31,610 reviews by customers, our 2003 Ford F-150 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2003 Ford F-150 and their top-rated products:

What types of Belts and Hoses do you sell for my 2003 Ford F-150?

Can I get help with 2003 Ford F-150 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford F-150 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford F-150 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.