2003 Ford Escape Ignition and Tune-Up Products

Essential 2003 Ford Escape Ignition and Tune-Up Products

Ishino Stone – Spark Plug Tube Seal (Part No.A8027174771ISH)

Spark Plug Tube Seal

from

$4.52
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Prenco – Prenco Direct Ignition Coil Boot (Part No.F3006239279PRN)

Prenco Direct Ignition Coil Boot

from

$14.55
Prenco Coil on Plug Boots provide the best protection possible for your ignition system versus the harsh environment created by the modem day engine. Prenco Coil on Plug Boots are constructed using the finest quality materials and compounds, and produced with superior quality tooling that exactly matches the Original Equipment Boot.

Product Features:
  • Prenco Coil on Plug Boots are produced using precise computer designed tooling and premium quality materials/compounds that are formulated to perform in extreme temperatures.
  • Prenco Coil on Plug Boots are designed as a direct replacement for the OE Boot. Springs, grommets and ferrite resistors are provided for all applications where applicable.
  • Inspect and replace Coil on Plug Boots every 50,000 miles and/or with every spark plug change to ensure optimum engine efficiency and performance.
  • Replacing Coil and Plug Boots at regular intervals will prevent/correct misfires and will help to minimize further costly damage to Ignition Coils, Sensors, Catalytic Convertors, and ECUs.
See More

DENSO – Spark Plug Wire Set: Carbon Core, 4 Wire Set (Part No.671-4061)

Spark Plug Wire Set: Carbon Core, 4 Wire Set

from

$50.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7175)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$8.99
Coil On Plug Insulator Boot: Spring included, Designed for direct fit

ACDelco – Double Platinum Spark Plug (Part No.41-810)

Double Platinum Spark Plug

from

$9.79
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITV20 (Part No.5339)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITV20

from

$11.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
See More

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS12YC (Part No.401)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS12YC

from

$2.99
Dependable Performance, OE Replacement, RS12YC. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
  • Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
  • Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug enhances reliability and ensures optimal engine performance.
See More

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-514)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$142.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:
  • These coils provide the exact spark timing that helps maximize the engine and emissions performance
  • RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
  • Engineered to help withstand temperature extremes
  • Internal insulation displacement connection is helps make high-reliability internal connections
  • Interior insulation helps ensure no internal arcing
  • Right fit for each application; helps provide ease of installation and removal
  • High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
  • Housings engineered to help resist cracking in the most extreme conditions
  • Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
See More

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-522)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$133.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:
  • These coils provide the exact spark timing that helps maximize the engine and emissions performance
  • RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
  • Engineered to help withstand temperature extremes
  • Internal insulation displacement connection is helps make high-reliability internal connections
  • Interior insulation helps ensure no internal arcing
  • Right fit for each application; helps provide ease of installation and removal
  • High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
  • Housings engineered to help resist cracking in the most extreme conditions
  • Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1355)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$77.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Switch (Part No.CSC1044)

Ignition Switch

from

$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Ignition Switch (Part No.M5050485258MTR)

Ignition Switch

from

$35.37
Ignition Switch

Carquest – Ignition Switch (Part No.CS646)

Ignition Switch

from

$25.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Cornering Light Socket (Part No.PT189)

Cornering Light Socket

from

$23.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Carquest Premium – Ignition Switch Connector (Part No.PTC1725)

Ignition Switch Connector

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Knock Sensor (Part No.SBC3847)

Knock Sensor

from

$34.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Delphi – Knock Sensor (Part No.AS10094)

Knock Sensor

from

$47.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3684)

Ignition Knock (Detonation) Sensor

from

$51.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA3099)

Ignition Coil Connector

from

$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA3032)

Ignition Coil Connector

from

$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT5749)

Air Charge Temperature Sensor Connector

from

$27.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7089)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-008FMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$35.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Motorcraft – Motorcraft Ignition Wire Set (Part No.F1020200737MTR)

Motorcraft Ignition Wire Set

from

$53.21
The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:
  • OEM quality
  • OEM connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
  • Reduces the chance of misfire
  • Increases engine life
  • Protects against wire set failure
See More

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4021)

Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit

from

$29.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7010)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$7.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

NGK – Coil on Plug Boot (Part No.59023)

Coil on Plug Boot

from

$5.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only high temperature, premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • IMPROVED HIGH TEMPERATURE DESIGN: Solves melting problems for certain very high heat applications
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Motorcraft – Direct Ignition Coil Boot (Part No.F3006429402MTR)

Direct Ignition Coil Boot

from

$18.78
The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • OES replacement part for your vehicle’s original factory component
  • Offering the quality, reliability, and durability of OES
  • Manufactured to OES specification for fit, form, and function
See More

2003 Ford Escape Ignition and Tune-Up Products

You count on your 2003 Ford Escape to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 85 Ignition and Tune-Up Products ranging in price from $2.99 to $251.99, you’re sure to find everything you need for your 2003 Ford Escape.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like NGK, Autolite, and E3. 2003 Ford Escape Ignition and Tune-Up Products start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 6,369 extensive product reviews on 2003 Ford Escape Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Spark Plug (AGSF32WM) with 4.8 stars and Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life with 4.8 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2003 Ford Escape below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2003 Ford Escape

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Ford Escape running right for years to come. In our inventory you’ll find brands like NGK, Autolite, E3, and even more.

Popular Bosch Ignition and Tune-Up Products

You’ll find popular Bosch brand products across Spark Plugs. All are waiting to get your 2003 Ford Escape back on the road. Some of the top-rated Bosch products in these categories are:
OE Fine Wire Single Platinum Spark Plug
from $4.29
(16)
OE Fine Wire Single Platinum Spark Plug
Spark Plugs

FAQs for 2003 Ford Escape Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2003 Ford Escape?

Out of 85 Ignition and Tune-Up Products for the 2003 Ford Escape, the most popular in our inventory are:

What are the top-rated 2003 Ford Escape Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2003 Ford Escape based on customer reviews/ratings are:
Spark Plug (AGSF32WM)
from $6.29
(255)
Spark Plug (AGSF32WM)
“Original”
PT16TT Platinum TT Spark Plug
from $5.99
(90)
PT16TT Platinum TT Spark Plug
“On line”