2003 Acura TL Steering and Chassis Parts

Essential 2003 Acura TL Steering and Chassis Parts

Cardone – Rack and Pinion Assembly (Part No.26-2703)

Rack and Pinion Assembly

from

$309.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Dorman – Power Steering Reservoir: White; Gray; Red, Plastic, Original Equipment Replacement (Part No.603-684)

Power Steering Reservoir: White; Gray; Red, Plastic, Original Equipment Replacement

from

$42.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
  • Complete assembly – includes reservoir and reservoir cap
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

Powercraft – Pump Seal Kit (Part No.8958)

Pump Seal Kit

from

$52.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

MTC – P/S Hose O-Ring (Part No.M2019413149MTC)

P/S Hose O-Ring

from

$2.65
P/S Hose O-Ring

MOOG – Ball Joint (Part No.K90492)

Ball Joint

from

$128.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Driveworks – Ball Joint (Part No.DW-K9643)

Ball Joint

from

$43.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.526-400)

Suspension Control Arm And Ball Joint Assembly

from

$256.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.

Product Features:
  • Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
  • Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
  • Durable construction – this part is made from quality materials for reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Corteco – P/S Seal (Part No.M2080947942CFW)

P/S Seal

from

$8.31
P/S Seal

Dorman – Suspension Control Arm (Part No.520-039)

Suspension Control Arm

from

$127.99
This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Autopart International Inc – P/S Pressure Hose (Part No.M20151956861API)

P/S Pressure Hose

from

$124.90
P/S Pressure Hose

Powercraft – Heavy Duty Steering Gear Major Seal Kit (Part No.8923)

Heavy Duty Steering Gear Major Seal Kit

from

$73.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8978)

Rack Pinion Seal Kit

from

$61.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Driveworks – Tie Rod End (Part No.DW-ES3491)

Tie Rod End

from

$25.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-288462B)

Suspension Control Arm And Ball Joint Assembly

from

$128.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rein – Power Steering Return Hose (Part No.PSH0403)

Power Steering Return Hose

from

$29.99
Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose with clamps
  • OE quality, braided rubber compound hose
  • Pre attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
  • Ensures proper operation of the power steering system
See More

Dorman – P/S Pressure Switch (Part No.M2097649956DOR)

P/S Pressure Switch

from

$62.72
P/S Pressure Switch

MOOG – Stabilizer Bar Link (Part No.K90341)

Stabilizer Bar Link

from

$33.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Cardone – Power Steering Pump (Part No.21-5441)

Power Steering Pump

from

$164.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Rare Parts – Strut Rod Bushing (Part No.RP17622)

Strut Rod Bushing

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces tire wear
  • Improves handling while breaking
  • Aids in alignment of vehicle
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

MOOG – Alignment Caster Shim (sold by each) (Part No.K90211)

Alignment Caster Shim (sold by each)

from

$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Part can help bring vehicle back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • Loose or worn chassis parts can lead to premature tire wear
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90556)

Stabilizer Bar Bushing Kit

from

$15.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Carquest – Power Steering Pressure Switch (Part No.PS207)

Power Steering Pressure Switch

from

$34.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1013)

Power Steering Pressure Switch

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Suspension Control Arm (Part No.522-048)

Suspension Control Arm

from

$92.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Alignment Camber / Toe Lateral Link (Part No.526-382)

Alignment Camber / Toe Lateral Link

from

$117.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

2003 Acura TL Steering and Chassis Parts

You count on your 2003 Acura TL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 119 Steering and Chassis Parts ranging in price from $1.59 to $522.05, you’re sure to find everything you need for your 2003 Acura TL.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 26 different brands like Imperial, Driveworks, and Cardone. 2003 Acura TL Steering and Chassis Parts start as low as $1.59!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 978 extensive product reviews on 2003 Acura TL Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 4.4 stars and Tie Rod End with 4.1 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2003 Acura TL below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2003 Acura TL

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Acura TL running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Cardone, and even more.

Popular TRW Steering and Chassis Parts

You’ll find popular TRW brand products across Ball Joints. All are waiting to get your 2003 Acura TL back on the road. Some of the top-rated TRW products in these categories are:
Ball Joint
from $40.94
(1)
Ball Joint
Lower Ball Joints

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2003 Acura TL, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2003 Acura TL Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2003 Acura TL?

Out of 119 Steering and Chassis Parts for the 2003 Acura TL, the most popular in our inventory are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
Ball Joint
from $43.99
(27)
Ball Joint
Suspension Ball Joint Kits

What are the top-rated 2003 Acura TL Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2003 Acura TL based on customer reviews/ratings are:
Ball Joint
from $57.99
(18)
Ball Joint
“good product/ worked great”
Tie Rod End
from $25.99
(18)
Tie Rod End
“great product”
Sway Bar Link Kits
from $26.99
(16)
Sway Bar Link Kits
“great product and great delivery same day!”