2002 Nissan Maxima Drivetrains
More 2002 Nissan Maxima Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2002 Nissan Maxima, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2002 Nissan Maxima Drivetrains
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.RW-101)
from
$29.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- Controlled heat treating process for lasting performance and extended bearing life
- Professional technicians know they can depend on National
Koyo – Wheel Bearing (Part No.K800020274KOY)
from
$13.60
Koyo designs, manufacturers and supplies a wide range of hubs and bearings to the world’s leading automotive manufacturers.
Product Features:
See More
Product Features:
- No need for pre-load adjustment at assembly
- Increased Load Rating
- Increased bearing life
- Equivalent to special re-melting steel GTS (Greater Toughness Steel Bearings)
- Increased durability and matrix strength by controlling alloy element
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53531)
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53612)
from
$128.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Dorman – Spindle Nut M24-1.50 Hex 32mm (sold by each) (Part No.615-223)
from
$7.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-113)
from
$9.49
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- High quality steel construction
- Conveniently available in many styles and in packs of different quantities
- Dorman’s Spindle Nuts are constructed to strict engineering quality standards
EMPI – Axle Shaft Nut (Part No.K4030847146EMP)
from
$6.31
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Beck/Arnley – Axle Nuts (Part No.103-0516)
from
$4.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium grade materials
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Driveworks – Wheel Hub Assembly (Part No.NT518516)
from
$112.99
Wheel hub assembly is an integral component of the wheel assembly, crucial to establishing the handling characteristics of your vehicle.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Ensures proper ABS function and quiet operation
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Improved connection and conductivity of the ABS signal due to high strength polymer and copper wiring
- Brand may vary by location
NOK – Differential Seal (Part No.J7040323764NOK)
from
$8.58
Differential Seal
NDK – Diff. Side Cover Sea (Part No.J7041110069NDK)
from
$10.05
Diff. Side Cover Sea
MTC – Differential Drain P (Part No.J7058947963MTC)
from
$2.06
Differential Drain P
EMPI – RE CV Joint Boot Kit (Part No.K6010468367EMP)
from
$41.00
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
EMPI – RE CV Joint Boot Kit (Part No.K6010182753EMP)
from
$28.66
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-632)
from
$21.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and clamps
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
EMPI – RE CV Joint Boot Kit (Part No.K6010182701EMP)
from
$29.16
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Ohno – CV Joint Boot Kit (Part No.K6010151661OHN)
from
$26.94
The Ohno CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
EMPI – RE CV Joint Boot Kit (Part No.K6010434166EMP)
from
$36.10
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Corteco – Input Shaft Seal (Part No.J1156158188CFW)
from
$6.61
Input Shaft Seal
Payen – Input Shaft Seal (Part No.J1156113348PAY)
from
$4.74
Input Shaft Seal
National – Multi Purpose Seal (Part No.710119)
from
$11.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
EMPI – Clamp – CV Boot (Part No.4I25091157EMP)
from
$2.46
Clamp – CV Boot
Popular 2002 Nissan Maxima Drivetrains Categories
2002 Nissan Maxima Drivetrains
You count on your 2002 Nissan Maxima to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 21 Drivetrains ranging in price from $2.06 to $295.99, you’re sure to find everything you need for your 2002 Nissan Maxima.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 10 different brands like Valvoline, Carquest Premium, and Driveworks. 2002 Nissan Maxima Drivetrains start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,806 extensive product reviews on 2002 Nissan Maxima Drivetrains. Some of the top-rated Drivetrains products we carry are CV Axle Shaft Assembly with 2.7 stars and CV Axle Shaft Assembly with 2.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2002 Nissan Maxima below to get started!
Top-Rated Drivetrains Brands For Your 2002 Nissan Maxima
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Nissan Maxima running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2002 Nissan Maxima back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2002 Nissan Maxima Drivetrains
What are the most purchased Drivetrains for the 2002 Nissan Maxima?
Out of 21 Drivetrains for the 2002 Nissan Maxima, the most popular in our inventory are:
What are the top-rated 2002 Nissan Maxima Drivetrains?
Top-rated Drivetrains for your 2002 Nissan Maxima based on customer reviews/ratings are:
from
$123.99
(1)
CV Axle Shaft Assembly
“6 months later and about 5k miles and the boots split in half, throwing grease all over my chassis and transmission.. Its very sad how cheaper and che”
