2002 GMC Yukon Drivetrains

Below you will find various in-demand GMC Drivetrains, components and accessories for your 2002 Yukon. Advance Auto Parts has popular Yukon parts like Differentials, Transfer Cases, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Yukon model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2002 GMC Yukon Drivetrains below and start saving instantly.

Popular 2002 GMC Yukon Drivetrains Categories

Differential Oil

4WD Actuator Switches

Differential Pinion Yokes

U-Joints

Drive Shaft and Axles

Transfer Case Assemblies

Transmission Transfer Case Motors

Transfer Case Adapter Gaskets

Transfer Case Output Shaft Sensors

Transfer Case Gaskets

Rear Differential Cover Gaskets

Transfer Case Control Modules

Drive Shaft Center Supports

Differential Open Unit and Components

Differential Covers

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Axle Shaft Bearing Assemblies

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

OE CV Boot Kits

Differential Pinion Pilot Bearings

4WD Switches

U-Joint Centering Yokes

Front Housing Cover Gaskets

Differential Cover Bolts

Input Shaft Pilot Bearings

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Transfer Case Adapters

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Rear Axle Shaft Bearings

Differential Ring and Pinions

Stub Axles

CV Quick Boot Kits

Differential End Yokes

Differential Pinion Supports

Spindle Lock Nuts

Differential Lock Assemblies

Axle Spindles

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Transfer Case Drive Chains

Rear Housing Cover Gaskets

Transfer Case Output Shaft Bearings

CV Intermediate Shafts

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Differential Seals

Axle Shaft Lock C-Clips

Complete Differentials

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Transfer Case Input Shafts

Spindle Lock Nut Thrust Washers

Differential Carrier Bearing Shims

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Mounting Adapter Seals

Differential Side Gear Thrust Washers

Transfer Case Oil Drain Plugs

Differential Pinion Gear Thrust Washers

Oil Pump Housing Seals

Transfer Case Shift Fork Inserts

Axle Shaft Snap Rings

Output Shaft Pilot Bearings

Differential Ring and Pinion Kits

Drive Axle Assemblies

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Transfer Case Intermediate Shafts

4WD Actuator Connectors

Transfer Case Oil Pump Housings

Differential Clutch Pack Clips

Transfer Case Clutch Kits

Drive Axle Shaft Housings

Transfer Case Vents

Power Take Off Input Shaft Bearings

Essential Drivetrains for 2002 GMC Yukons

from

$10.99

8.2″ & 8.5″ rear cover gasket.

Product Features:

Cover gasket
Fits GM 8.2″, 8.5″ and 8.6″

from

$115.99

Product Features:

GM8.6″ INTERNAL KIT (OPEN) 30 SPL.

from

$499.99

Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber

Product Features:

By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification

from

$1805.99

Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$117.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$248.99

This transfer case housing matches the fit and function of a cracked or leaking original equipment housing. Durably constructed, this housing includes new seals to ensure a leak-free installation.

Product Features:

Ideal replacement – this transfer case housing is a direct replacement for a cracked or leaking original equipment housing
Durable construction – this 100% new housing is precision-manufactured for reliable longevity
Cost-effective solution – offers original equipment quality at a competitive price compared to original equipment
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$20.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$87.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$189.99

TCaseBrg-SealKit

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$17.99

U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.

Product Features:

u-joint strap kit
Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
1350 and 1410 u-joint size
Includes two straps and four bolts

from

$26.99

Pinion seal for 9.5″ GM (’79-’97).Yukon Mighty seal.

Product Features:

Pinion seal
Fits 1997 and down GM 9.5″

from

$6.99

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$544.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$6.99

This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$57.99

8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac

from

$33.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$179.99

Product Features:

GM 10BL 8.5 R/P 4.11A MG FRT/REAR

from

$16.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

Product Features:

Cross pin shaft
Fits GM 9.5″
Dura Grip positraction

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$13.99

This transfer case adapter seal matches the fit and function of worn or damaged original equipment part. This seal should be replaced as part any service that requires the transfer case and transmission to be separated.

Product Features:

Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission
Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service
Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$13.99

Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission
Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service
Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$111.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$16.79

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$82.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Upgrade your 2002 GMC Yukon with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2002 GMC Yukon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your Yukon functioning at its best. At Advance Auto Parts, we offer a wide selection of 428 Drivetrains for the 2002 GMC Yukon, designed to meet your needs without breaking the bank. From Differential replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2002 GMC Yukon at great prices. Our Drivetrains inventory for this model ranges from just $2.59 to $3,099.99, with an average price of $247.11. Our 428 Drivetrains in stock come from 24 trusted brands, so you’re sure to find the right part for your 2002 GMC Yukon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 GMC Yukon, we stock popular OEM and aftermarket Drivetrains from top names like National, Dorman, Motive Gear, and more. National Drivetrains start at just $13.99 and boast an impressive 4.3 stars average rating from customers. Dorman and Motive Gear also bring quality to the table, with Drivetrains available starting at $7.99, and at an average 4.2 stars rating. With 6,843 customer reviews and counting, our 2002 GMC Yukon Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 GMC Yukon is always ready to roll. We’re committed to providing you with everything you need to keep your Yukon in top shape, all in one place. Start shopping confidently below for your 2002 GMC Yukon!

Best-Selling Differentials for 2002 GMC Yukons

Enhance the driving experience in your GMC with 287 quality Differential components, starting at $2.59.

show more show less

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$7.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.29

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$333.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$7.99

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$124.99

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

AXLE SHAFT GM8.6″ 30SPL. L/R 2/4WD 33 9/16″ O.A. 1999-2006

from

$503.99

from

$37.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$234.99

Product Features:

GM 10BL 8.5 R/P 3.42A MG FRT/REAR

from

$10.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$83.99

The National bearing & seal kit includes all the components required to complete the repair.

Product Features:

COMPLETE SOLUTION – Includes everything needed to complete the repair
STRONG AND DURABLE – Controlled heat treatment process for strength and durability
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Professional technicians know they can depend on National

from

$99.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

KIT-BRG & SEAL GM 8.5 10 BOLT – ’99 & UP LATER

from

$157.99

BEARING GASKET & SEAL KIT, 10 BOLT GM ’99 AND UP MASTER KIT

from

$241.99

Product Features:

GM 10BL 8.5 R/P 3.73A MG FRT/REAR

from

$6.79

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg F to 225 Deg F / -40 Deg C to 107 Deg C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$139.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$27.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$231.99

This Motive Gear Differential Rebuild Kit includes all of the parts required to rebuild your stock open differential. The gears are lapped for quiet operation. Includes spider and side gears, cross shaft, lock pin or bolt and thrust washers.

Product Features:

GM8.6″ INTERNAL KIT (OPEN) 30 SPL. MID 2000-2008

from

$243.99

Product Features:

GM 10BL 8.5 R/P 3.73 MG FRT/REAR

from

$342.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$52.99

DIFF COVER KIT

from

$176.99

Product Features:

GM9.5″ INTERNAL KIT (OPEN) 33 SPL. FRONT & REAR

Most Popular 2002 GMC Yukon Transfer Cases

Customize your GMC with 56 Transfer Cases products like Transfer Case Gaskets, Transmission Transfer Case Motors, and Input Shaft Bearings, all priced under $349.99.

show more show less

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$17.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$194.99

CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100 percent computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:

All motors are 100 percent torque tested to ensure strength for proper gear engagement.
Each unit is 100 percent computer tested at 3 points during the remanufacturing process for guaranteed performance.
Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
Motor magnets are 100 percent recharged for superior performance and reliability.
Transfer case motor sensors are 100 percent replaced with new, O.E.-quality sensors for superior performance and long product life.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$248.99

Ideal replacement – this transfer case housing is a direct replacement for a cracked or leaking original equipment housing
Durable construction – this 100% new housing is precision-manufactured for reliable longevity
Cost-effective solution – offers original equipment quality at a competitive price compared to original equipment
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$37.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$39.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$349.99

Transfer case control module no longer in control? Restore it cost-effectively with this replacement module that provides the same function and performance of the original on specific vehicles.

Product Features:

Direct replacement – this transfer case control module directly replaces the original equipment modules on certain vehicle years, makes and models
Effective fix – replacement restores transfer case motor control and addresses trouble codes
Thoroughly tested – each module undergoes rigorous testing to ensure reliable performance
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.99

Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:

Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
Effective fix – restores a tight seal in the transfer case after original gasket fails
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$39.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$5.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$38.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$267.99

Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:

Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
100% new – this transfer case motor is entirely new, not remanufactured like competitors
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$59.99

ACDelco GM Original Equipment Vehicle Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$52.99

Design type: spring loaded; multi-lip
Temperature range: -100 Deg. F to 450 Deg. F; -73 Deg. C to 232 Deg.C
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$53.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$46.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$11.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$31.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$106.99

This transfer case adapter replaces a damaged or cracked original equipment adapter, restoring a solid connection between the transmission and transfer case. Made of durable aluminum, this adapter includes a new gasket for a complete repair.

Product Features:

Ideal replacement – this transfer case adapter is a direct replacement for a damaged or cracked original equipment adapter
Durable construction – manufactured from aluminum, this transfer case adapter is made to provide years of reliable service
Complete solution – this adapter includes a new transfer case adapter gasket for a complete repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$19.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$13.99

Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission
Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service
Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$9.99

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

TCase Adapter Gasket

Top Picks for 2002 GMC Yukon Universal Joints

Upgrade GMC Yukons with top-quality Universal Joints parts, including 20 OEM and aftermarket selections for your 2002 model.

show more show less

from

$42.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$11.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 355, 372 & 534G
Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$29.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$45.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$8.99

Universal Joint

from

$19.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$36.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$4.59

Universal Joint

from

$13.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$63.99

Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$407.99

Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1998 and up GM 9.5″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
Strap style

from

$65.99

Yukon Mechanics 3R Lifetime Series U/Joint. 2.556″ span ring span, 1.125″ cap diameter. Inside snap ring.

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$46.99

Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.

from

$22.99

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.

Product Features:

u-joint strap kit
Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
1350 and 1410 u-joint size
Includes two straps and four bolts

In-Demand 4WD Components for 2002 GMC Yukons

Select from 9 premium 4WD Components parts for your 2002 GMC Yukon, with prices ranging from $43.99 to $119.99.

show more show less

from

$119.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
Smart solution – delivers reliable fit and function for competitive price
Trustworthy quality – backed by team of designers and engineers in the United States

from

$86.99

This 4WD switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this 4WD switch is made to match the fit and function of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$107.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The 4WD Actuator ensures seamless transition between 2WD and 4WD modes, providing enhanced traction and stability on challenging terrains without manual intervention. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$81.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Transfer Case Shift Motor GM 8.25" IFS & 9.25" IFS Electric

from

$99.99

GM 8.25IFS & 9.25IFS SHIFT MOTOR 97-14 GM ELECTRIC STYLE .

Product Features:

Shift Motor GM 8.25″ IFS & 9.25″
Front Drive Axle Electric Shift Lock Actuator
Without Wire Harness

from

$78.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The 4WD Switch allows drivers to easily switch between 2WD and 4WD modes, offering greater control and flexibility for adapting to different driving conditions, such as off-road trails or slippery surfaces. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$92.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$52.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$43.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Most Sold 2002 GMC Yukon Drive Shafts and Axles

Explore our best-selling GMC parts for the 2002 Yukon among 47 OEM and aftermarket options starting from $6.99.

show more show less

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$49.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$155.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$134.99

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1988-2012
Weight approx: 2 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.60 INCH / 66 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
WITH PLATE
WITH STUDS
STYLE: ROUND FRAME

from

$6.99

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$21.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

from

$19.99

Value-priced bearing meets all cataloged application requirements.

from

$106.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1996-2022
Weight approx: 2 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
WITHOUT PLATE
WITHOUT STUDS
EXTENDED DUST SHIELD

from

$14.99

Stub axle retaining clip snap ring for 8.25″ GM IFS.

Product Features:

Outer axle snap ring for GM 8.25″ IFS

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$24.99

Product Features:

Fits GM 8.6″ and 9.5″
Sleeve to adapt standard yoke to use late model triple lip pinion seal

from

$16.79

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$106.99

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1988-2012
Weight approx: 3 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
WITHOUT PLATE
WITH STUDS

from

$201.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$89.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:

Includes axle bearing and seal
Services one side
2.800″ O.D.
1.620″ I.D.

from

$21.49

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$167.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$117.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.

Product Features:

Rear axle seal
Fits 1988 and up GM half ton truck
2.800″ O.D.
1.620″ I.D.

from

$10.99

9.5″ GM C/clip.

Product Features:

c-clip for GM 9.5″

from

$162.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$42.99

Product Features:

Brand may vary by location

Top-Rated Drivetrains Brands For Your 2002 GMC Yukon

Shop for the best-rated brands offering Drivetrains and other products for your 2002 GMC Yukons. Below you’ll find some of our best rated Drivetrains from National, Dorman, and Motive Gear, and more. Drivetrains from these brands that fit a 2002 Yukon start at just $7.99 and are rated as high as 4.3 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2002 GMC Yukon Drivetrains

When it comes to maintaining or upgrading your 2002 GMC Yukon, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 2002 GMC Yukon. With over 3 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.99, with an average price of just $17.32. Plus, with over 38 customer reviews and an average rating of 4.3 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $13.99

(9)

Bearing

“as advertised”

from $17.99

(7)

Multi-Purpose Bearing

“National bearings amazingly made in USA. Did the job.”

from $19.99

(22)

Multi-Purpose Seal

“Works as expected.”

Popular Dorman 2002 GMC Yukon Drivetrains

Dorman auto parts is one of the highest quality Drivetrain brands in the market. Any 2002 GMC Yukon owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2002 Yukon, Advance Auto Parts carries a full inventory of 3 Dorman Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dorman Drivetrains range from $248.99 to $349.99, plus, with more than 7 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $248.99

(2)

Transfer Case Housing

“Nice casting. Comes with rear output yoke bushing and front output shaft rear roller bearing already installed. Need to relocate rear output bearing”

from $333.99

(4)

Axle Shaft

“Perfect fit! Excellent quality.”

from $349.99

(1)

Remanufactured Transfer Case Control Module

“4 wheel drive did not work on my 2000 suburban, it had a service 4 wheel drive message. I replaced tccm with this remanufactured unit and it now work”

FAQs for 2002 GMC Yukon Drivetrains

Which Drivetrains are best-sellers for 2002 GMC Yukons?

Out of 428 Drivetrains that fit 2002 GMC Yukons, the following parts are the top sellers:

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Greaseable Premium Universal Joint (10086738) – $42.99
CV Axle Shaft Assembly (15870070) – $155.99

What’s the price range for 2002 GMC Yukon Drivetrains?

Drivetrain prices for the 2002 GMC Yukon start at $2.59 and go up to $3,099.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2002 GMC Yukon?

The average price for Drivetrains for the 2002 GMC Yukon is $247.11. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other GMC Yukon model years?

Yes, we currently carry Drivetrains for 33 model years of GMC Yukons between 1992 and 2026. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Drivetrains for my 2002 GMC Yukon?

The cheapest 2002 GMC Yukon Drivetrains we carry in stock are:

Differential Pinion Gear Washer (10282533) – $2.59
Ring Gear Bolt (20520168) – $2.99
Differential Cross Shaft (10282201) – $2.99
Differential Ring Gear Bolt (10282159) – $2.99
Differential Crush Sleeve (10282146) – $2.99

What are the top-rated Drivetrains that fit the 2002 GMC Yukon?

Out of 6,843 reviews by customers, our 2002 GMC Yukon Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2002 GMC Yukon and their top-rated products:

Spindles
- Spindle Washer – I.D. 25.3 mm O.D. 44.2 mm Thickness 5.2 mm (11115443) – $8.29
4WD Components
- Spindle Washer – I.D. 25.3 mm O.D. 44.2 mm Thickness 5.2 mm (11115443) – $8.29
Universal Joints
- Spindle Washer – I.D. 25.3 mm O.D. 44.2 mm Thickness 5.2 mm (11115443) – $8.29

What types of Drivetrains do you sell for my 2002 GMC Yukon?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2002 GMC Yukon:

Can I get help with 2002 GMC Yukon Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.

What is your return policy for GMC Yukon Drivetrains?

Advance Auto Parts keeps returns simple. For new GMC Yukon Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 GMC Yukon Drivetrains

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BI)

Belltech – Spindle Assembly, 2 Inch Drop, Steel, Set Of 2 (Part No.2509)

Spartan – Drive Axle Assembly; GM Posi Truck Axle GU6 (Part No.RAXP0105B)

National – Multi Purpose Bearing (Part No.HB-88540)

Dorman – Transfer Case Housing (Part No.917-561)

National – Bearing Race (Part No.HM803110)

Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 55477)

USA Standard Gear – TCaseBrg-SealKit (Part No.71674)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)

Yukon Gear – Pinion Seal For 9.5" GM (’79-’97) (Part No.30043)

Dorman – Spindle Washer – I.D. 25.3mm O.D. 44.2mm Thickness 5.2mm (Sold by each) (Part No.618-057)

Powertrax – No-Slip Traction System (Part No.9207853005)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

National – Multi-Purpose Seal (Part No.710647)

Motive Gear – Differential Ring and Pinion (Part No.GM10-411A)

Felpro – Transfer Case Adapter Gasket (Part No.72770)

Yukon Gear – Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier (Part No.33205)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Dorman – Transfer Case Adapter O-Ring (Part No.926-832)

Dorman – Transfer Case Adapter O-Ring (Part No.926-831)

FAG US – Axle Shaft Repair Bearing (Part No.DR0151K)

National – Multi-Purpose Bearing (Part No.B-2010)

National – Multi-Purpose Bearing (Part No.110)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

National – Bearing Race (Part No.M88010)

National – Bearing Race (Part No.LM501314)

Dorman – Axle Shaft (Part No.630-120)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Motive Gear – Axle Shaft (Part No.12479285)

Powertrax – Grip LS Traction System (Part No.LS201030)

National – Shaft Repair Sleeve (Part No.99199)

Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55028-1)

Felpro – Axle Housing Cover Gasket: Irregular Shaped 14 Bolt Hole Gasket (Part No.RDS 55387)

National – Axle Differential Bearing & Seal Kit (Part No.RA-321-C)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R10RL)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10RLMK)

Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

National – Multi Purpose Seal (Part No.710506)

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

National – Multi-Purpose Bearing (Part No.A-36)

Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BIL)

Motive Gear – Differential Ring and Pinion (Part No.GM10-373)

Richmond Gear – Differential Ring And Pinion (Part No.49-0034-1)

ATP – DIFF COVER KIT (Part No.111107)

Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)

Felpro – Transfer Case Adapter Gasket (Part No.72770)

National – Multi-Purpose Bearing (Part No.B-2110)

Cardone – Remanufactured Transfer Case Motor (Part No.48-105)

Dorman – Transfer Case Housing (Part No.917-561)

National – Multi-Purpose Seal (Part No.710645)

National – Shaft Repair Sleeve (Part No.99139)

Dorman – Remanufactured Transfer Case Control Module (Part No.599-105)

Driveworks – Needle Bearing (Part No.S-B-2110)

Dorman – Transfer Case Gasket (Part No.917-562)

National – Multi-Purpose Seal (Part No.710496)

Driveworks – Oil Seal (Part No.S-9449)

National – Multi-Purpose Bearing (Part No.208)

Dorman – Transfer Case Shift Motor (Part No.600-901)

GM Genuine Parts – Vehicle Speed Sensor (Part No.19302667)

National – Multi-Purpose Seal (Part No.710771)

National – Transfer Case Output Shaft Seal (Part No.710495)

Carquest Premium – Vehicle Speed Sensor (Part No.SBA3658)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

National – Shaft Repair Sleeve (Part No.99225)

Dorman – Transfer Case Housing Adapter (Part No.926-890)

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Dorman – Transfer Case Adapter O-Ring (Part No.926-831)

National – Multi-Purpose Seal (Part No.341022)

USA Standard Gear – TCase Adapter Gasket (Part No.74586)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

Driveworks – Universal Joint (Part No.DW-534G)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)