from

$8.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$22.99

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Maintains safe movement and effective stopping performance
Helps deliver a quieter, more efficient braking system
Coated to eliminate heat and corrosion deterioration

from

$4.49

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$127.99

PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new caliper slide pins/bolts, seals, dust boots, bleeder screws, and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:

All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
High temperature EPDM rubber for extended life.
Premium silicone lubrication provides smoother operation.
The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.

from

$26.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$25.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.49

This brake hydraulic hose to caliper bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
Featuring industrial grade materials for robust performance
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$105.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$225.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers comes with everything you need, from pads, rotors, calipers and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit with Calipers.

Product Features:

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
All calipers are powder coated, assembled, and tested in our Chicago, IL facility
Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits

from

$129.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits

from

$9.99

This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

ACDelco Professional Temperature Control Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$15.99

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

Each unit is 100% new, providing consistent performance when servicing your brake system
Easy to transfer for on-the-spot master cylinder bleeding
Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
Easy to clean to ensure no cross contamination
Durability for long lasting performance

from

$26.46

An ACDelco GM Original Equipment Brake Light Switch is a GM-recommended replacement for your vehicle’s original component. It is electrically powered and causes the brake lights to engage when the brakes are applied. This original equipment brake light switch has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Work with vehicle electronics to help optimize vehicle capabilities
Variety of switches, including: door lock, turn signal, ignition, trunk, and windshield wiper switches all engineered to meet GM specific designs for fit, form, and function
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$82.34

ACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.

Product Features:

No machining required – ready to be installed right out of the box
Rust-preventative coating
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design
(D3EA®) and SAE J2784 testes and approved
Noise/Vibration/Harshness (NVH) and durability/wear tested

from

$14.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Brake Fluid Level Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper braking functionality.
The Brake Fluid Level Sensor is responsible for detecting the amount of brake fluid present in the vehicle’s brake master cylinder reservoir.

from

$16.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
Recommended replacement is suggested when servicing drum brake
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$2.29

This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.49

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$2.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured to restrain high tolerances with quality materials

from

$35.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$10.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$41.99

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$136.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All aluminum castings are “hard anodized”
All iron castings are coated to prevent rust
Manufacturers all major components in house.
Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
All machining done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
Assembly is done in clean room insuring no contamination is introduced into final assembly.
All assemblies are dated coded for 100% accurate trace-ability.
Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance

from

$3.79

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States