from

$13.49

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

from

$14.29

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

from

$10.49

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Includes Stop Leak Additives to prevent and stop power steering system leaks.
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
Conventional Formula – For use in all manufacturers

from

$9.99

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
For use in all manufacturers
Conventional Formula – For use in all manufacturers

from

$12.29

Automatic transmission fluid is a technologically advanced, low viscosity formulation specially designed to deliver performance and maximum fuel efficiency for modern automatic transmissions.

Product Features:

Full Synthetic, low viscosity formulation
OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
Enhanced friction durability for smooth transmission performance
Superior high temperature protection to effectively resist oxidation
Unsurpassed protection against copper corrosion
Industry Specifications and OEM Approvals: JASO-1A
Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV

from

$8.79

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also recommended for transmissions, power steering systems, and hydraulic systems requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

Good foam and corrosion prevention
Safe for seals
Promotes smooth shifting
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$41.49

PENTOSIN ATF 6 1L

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$11.49

European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
Extra wear protection vs. industry and oem standards with advanced anti-wear additives
Superior performance for european gasoline and diesel engines
Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
Superior engine sludge and varnish protection for European-made gasoline and diesel engines.

from

$49.99

Pentosin FFL-4 is the only approved First Fill and Service Fill transmission fluid for the new generation of BMW double clutch gear transmissions (DCT). Pentosin FFL-4 is founded on a fully synthetic base oil technology for safe operation at even the highest thermal load. FFL-4 features a special clutch friction performance which makes it mandatory to be applied solely to the double clutch gear box do not mix with any other gear oils.

Product Features:

Formulated anti-wear chemistry and friction modifiers guarantee stable friction performance in modern transmissions.
Fully synthetic fluid with constant stable friction characteristics under the most severe driving conditions.
Exclusively developed for applications in the new Audi/Volkswagen, BMW, Porsche double clutch transmission.
Features a special clutch friction performance which makes it mandatory to be applied to DCT gear box only.

from

$88.99

Pentosin DOT 4 LV is a special brake fluid of highest DOT 4 performance levels and extremely low viscosity at cold temperatures. It offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance. Pentosin DOT 4 LV Brake Fluid is ideal for all modern vehicles with ESP and ABS. DOT 4 LV can be used in all vehicles that require DOT 4 fluid. High safety margin against vapor lock. Long-term resistance to absorbing and retaining water. Superior corrosion resistance. Low viscosity fluid provides excellent flow performance at low temperature.

Product Features:

Safety against vapor lock
Provides superior corrosion resistance
Highest DOT 4 performance levels and extremely low viscosity at cold temperatures.

from

$7.99

Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

50,000 Mile Fluid Life
Prevent Overheating & Brake Fade with High Grade Formula
Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
Synthetic, Extended Fluid Life Formula

from

$15.49

Prestone® MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

75,000 Mile Fluid Life
Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
Superior Protection in Extreme Braking Conditions
Synthetic, Long Life Formula – 1.5X Longer than regular Prestone DOT 4

from

$13.99

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$44.99

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.

Product Features:

Ideal for cold weather climates.
Operating temperature range from -40C to 130C
Works perfectly under extreme temperature changes.
Used by more then 25 global vehicle manufactures as OE first-fill.

from

$22.99

Prestone® European Vehicles (Teal) antifreeze+coolant (AFC) is our MOST ADVANCED TECHNOLOGY specially designed to work with all BMW®; All Mini®; All Volvo®; Mercedes® older than 2014; Volkswagen® older than 1997; Audi® older than 1997; Jaguar® older than 1999, Porsche® older than 1996. This extended life coolant is formulated for these engines and the specific needs placed on the coolant. Prestone’s Antifreeze+Coolants are designed to the highest standards using state of the art technology. These fluids are designed to not only manage the engine temp, antifreeze and antiboil, they also guard against rust & corrosion. This fluid is designed to last 5yrs / 150,000 miles. Year Round Protection – Antifreeze to -34 Deg. F; Antiboil/overheat protection to +265 Deg. F.

Product Features:

Specially formulated to work with vehicles using teal colored fluid; HOAT or G48/G11. All BMWs; All Minis; All Volvos; Mercedes pre-2014; Volkswagen pre-1997; Audi pre-1997; Jaguar pre-1999; Porsche pre-1996.
Superior protection guarantee – 5 Yr., 150,000 mile Extended life formula
Includes protection against scale, rust and corrosion of all cooling system metals, including aluminum.
Ready to Use formula – Prediluted 50/50. Perfect for small volume top-off or complete drain and refill of the cooling system

from

$19.79

PEAK® Antifreeze + Coolant Concentrate is specially engineered to deliver guaranteed superior lifetime protection. Its advanced universal formula contains a proprietary blend of 10X the scale-fighting inhibitors coupled with robust organic additives to fight against the damaging effects of scale deposits and corrosion. PEAK Antifreeze + Coolant is free of 2-EHA, silicate, nitrite, borate, and amines, ensuring maximum cooling system performance for 10+ years/300,000+ miles. It is compatible for use with any color or type of antifreeze/coolant in the system.

Product Features:

Specially formulated to deliver Superior Lifetime Protection against damaging scale and corrosion
Contains 10X the scale-fighting inhibitors to ensure maximum cooling system performance
Provides more than 2X the warranty coverage for 10+ years/300,000+ miles of service
Universal formula is compatible with any color or type of antifreeze/coolant
Meets the performance requirements of ASTM D3306 and D4985

from

$13.99

Fram Extended Life AMAM Concentrate is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up & boil-over protection.

Product Features:

Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT
5 Yr., 150,000 mile Extended life formula.
Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

from

$19.99

PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of European vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE is an ethylene glycol-based antifreeze/coolant specifically developed for use in any European vehicle requiring a Blue silicate-enhanced hybrid organic acid technology (Si-HOAT) formula. It contains high-quality organic and inorganic corrosion inhibitors and is free of nitrite, phosphate and amines chemicals. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE meets the performance requirements of ASTM D3306 and BS 6580. With a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.

Product Features:

Matches each European vehicle manufacturer’s technology and color requirements
Protects all cooling system metals from rust and corrosion
Meets the performance requirements of ASTM D3306 and BS 6580
Service life of up to 5 years/150,000 miles with a complete cooling system flush and fill
Color-coding and vehicle applications listed on the front simplify selecting the right antifreeze/coolant
Available as both concentrate and 50/50 products to do the job right
Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

from

$14.99

Product Features:

Reduces heat & wear
Eliminates TQ converter shudder & clutch pack chatter
For all automatic transmissions & 4×4 transfer cases

from

$13.49

Certified A/C Pro R-134a PAG 100 Refrigerant Oil with ICE 32. This product contains approximately 8 fluid ounces of PAG refrigerant oil with ICE32. Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity. R-134a PAG 100 AC Oil Lubricant with ICE32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity. The PAG oil helps quiet noisy compressors. Meets OEM specifications.

Product Features:

Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity
ICE32 Lubricant Enhancer: advanced chemistry to help extend compressor life and improve cooling capacity
Meets OEM specifications

2002 BMW Z3 Fluids and Chemicals

More 2002 BMW Z3 Fluids and Chemicals Categories

Essential 2002 BMW Z3 Fluids and Chemicals

Factory Air – 8 oz. Bottle Premium PAG 46 Oil w/o Dye (Part No.59007)

Factory Air – 8 oz. Bottle Premium PAG 100 Oil w/o Dye (Part No.59002)

Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz (Part No.AS263Y)

Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)

Castrol – Transmax ATF Full Synthetic Multi-Vehicle Automatic Transmission Fluid (1 Quart) (Part No.152A76)

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F420)

Pentosin – PENTOSIN ATF 6 1L (Part No.1058106)

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 1 Quart (Part No.VV966)

Pentosin – FFL4 Full Synthetic Double Clutch Transmission Fluid: 1 Liter (Part No.1080107)

Pentosin – DOT 4 Brake Fluid: Safety Against Vapor Lock, Provides Superior Corrosion Resistance, 5 Liter (Part No.1224204)

Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, 50,000 Mile, 12 fl. oz. (Part No.AS800Y)

Prestone – MAX DOT 4 Brake Fluid, 32 fl. oz., Synthetic, Highest Grade, 75,000 Mile (Part No.AS810)

Valvoline – Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822389)

Pentosin – CHF 11S Hydraulic Fluid. Compatible with CHF 202. (Part No.1405116)

Prestone – Antifreeze and Coolant: 50/50 Ready To Use, Original Equipment European Teal, 1 Gallon (Part No.AF6100)

Peak – 10X Antifreeze + Coolant Concentrate for All Vehicles – 1 Gallon (Part No.PKP0B3)

FRAM – Antifreeze & Coolant: 50/50 Ready To Use, OE North American Gold, 1 Gallon (Part No.F301)

Peak – Original Equipment Euro Blue Antifreeze and Coolant: 50/50 Ready To Use, 1 Gallon (Part No.PEBB53)

ATP – Trans Fluid Additive (Part No.AT-202)

Certified A/C Pro – R-134a PAG 100 AC Oil Lubricant: With ICE 32 For Improved Cooling, 8 oz (Part No.GPM-7)

Popular 2002 BMW Z3 Fluids and Chemicals Categories

2002 BMW Z3 Fluids and Chemicals

Top-Rated Fluids and Chemicals Brands For Your 2002 BMW Z3

Popular Castrol Fluids and Chemicals

Top-Rated Valvoline Fluids and Chemicals

FAQs for 2002 BMW Z3 Fluids and Chemicals

What are the most purchased Fluids and Chemicals for the 2002 BMW Z3?

What are the top-rated 2002 BMW Z3 Fluids and Chemicals?

More Popular Parts for All Makes