2000 Jeep Grand Cherokee Suspension Parts
Find Your Specific 2000 Jeep Grand Cherokee Suspension Parts
Below you will find various in-demand Jeep Suspension Parts, components and accessories for your 2000 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Shocks and Struts, Air Suspension and Kits, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Grand Cherokee model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2000 Jeep Grand Cherokee Suspension Parts below and start saving instantly.
Popular 2000 Jeep Grand Cherokee Suspension Parts Categories
Essential Suspension Parts for 2000 Jeep Grand Cherokees
MOOG – Coil Spring Set (Part No.80974)
from
$165.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.80910)
from
$148.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Crown Auto Jeep Replacmnt – Coil Spring Isolator, Left or Right Rear Lower (Part No.52088402AB)
from
$25.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52088346AB)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Dorman – Suspension Control Arm (Part No.524-056)
from
$359.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Crown Auto Jeep Replacmnt – Fully Boxed, Steel, With Bushings (Part No.52088208AB)
from
$59.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Dorman – Help – Control Arm Bolt Kit (Part No.14859)
from
$16.99
Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.
Product Features:
See More
Product Features:
- Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt.
- Durable construction – made of hardened steel to match the function and durability of the original part
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life
Dorman – Front Strut Clevis Bolt (Part No.926-410)
from
$19.99
This suspension strut fork bolt is designed to match the fit and function of a factory bolt on specified vehicles. It is engineered to help connect a suspension fork to the shock/strut and the control arm when an original bolt is damaged or missing.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft suspension strut fork bolt is designed to match the fit and function of a factory bolt on specified vehicle makes, models and years
- Ideal solution – engineered to help securely mate a suspension fork to the shock/strut and the control arm when an original bolt is missing, damaged, or due for replacement during suspension service
- Durable construction – made of quality materials for reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7025)
from
$58.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Rancho – RS5000X Shock Absorber (Part No.RS55128)
from
$85.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
- SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- Rebound Bumper
Dorman – Front Lower Coil Spring Bracket (Part No.926-083)
from
$129.99
This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
Product Features:
See More
Product Features:
- Money-saving repair – this coil spring bracket allows repair of the rusted axle housing section and mount.
- Durable materials – carbon steel mount is coated in weldable primer for a clean weld-on repair.
- Vehicle and position specific – designed to match original mounts on certain Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Front Lower Coil Spring Bracket (Part No.926-082)
from
$182.99
This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
Product Features:
See More
Product Features:
- Money-saving repair – this coil spring bracket allows repair of the rusted axle housing section and mount.
- Durable materials – carbon steel mount is coated in weldable primer for a clean weld-on repair.
- Vehicle and position specific – designed to match original mounts on certain Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Whiteline – Trailing Arm Upper Bushing (Part No.W51749)
from
$114.99
Suffering uneven tyre wear, unbalanced braking or a less predictable front end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Monroe – Reflex Light Truck Shock Absorber (Part No.911278)
from
$91.99
Ideal for vehicles with a higher center of gravity, Monroe® Reflex® light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.
Product Features:
See More
Product Features:
- IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
- 2-1/4 inch or 2 inch Diameter Reserve Tube: Allows more fluid carrying capacity for a cooler running unit.
- 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
- 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic LT Shock Absorber (Part No.59387)
from
$67.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
MOOG – Coil Spring Insulator (Part No.K160057)
from
$20.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MOOG – Coil Spring Insulator (Part No.K160061)
from
$18.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Dorman – Front Lower Coil Spring Bracket Repair (Part No.926-079)
from
$94.99
When a coil spring mount corrodes, it often means replacing the entire axle assembly. This spring seat repair kit installs to replace only the failed front position coil spring bracket mount.
Product Features:
See More
Product Features:
- Cost-effective repair – this coil spring seat repair kit allows a rusted spring seat to be replaced independent of the entire axle assembly.
- Durable materials – carbon steel repair kit is coated in corrosion-resistant paint for a durable bolt-on repair with no welding required.
- Vehicle and position specific – designed to match original front spring mounting seat on Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Front Lower Coil Spring Bracket Repair (Part No.926-078)
from
$94.99
When a coil spring mount corrodes, it often means replacing the entire axle assembly. This spring seat repair kit installs to replace only the failed front position coil spring bracket mount.
Product Features:
See More
Product Features:
- Cost-effective repair – this coil spring seat repair kit allows a rusted spring seat to be replaced independent of the entire axle assembly.
- Durable materials – carbon steel repair kit is coated in corrosion-resistant paint for a durable bolt-on repair with no welding required.
- Vehicle and position specific – designed to match original front spring mounting seat on Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
MOOG – Control Arm Bushing (Part No.K200182)
from
$45.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
TRW – Control Arm Bushing Kit (Part No.L2040467853TRW)
from
$39.72
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
- Kit includes bushings and hardware – (SEE Note)
Whiteline – Spring Pad Bushing (Part No.W73416)
from
$30.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)
from
$14.99
Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.
Product Features:
See More
Product Features:
- The ultimate protection for your automatic transmission
- 45% stronger against breakdown
- Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
- Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Upgrade your 2000 Jeep Grand Cherokee with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 2000 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Suspension Parts are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 61 Suspension Parts for the 2000 Jeep Grand Cherokee, designed to meet your needs without breaking the bank.
From
Shocks and Strut
replacements to
Air Suspension and Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2000 Jeep Grand Cherokee at great prices.
Our Suspension Parts inventory for this model
ranges from just $6.29 to $182.99, with
an average price of $69.49.
Our 61 Suspension Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2000 Jeep Grand Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Jeep Grand Cherokee, we stock popular OEM and aftermarket Suspension Parts from top names
like Monroe, Rancho, Moog, and more.
Monroe Suspension Parts
start at just $13.29 and boast an impressive 4 stars average rating from customers.
Rancho and Moog also bring quality to the table, with Suspension Parts available starting at $7.99, and at an average 4 stars rating.
With 1,040 customer reviews and counting, our 2000 Jeep Grand Cherokee Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place.
Start shopping confidently below for your 2000 Jeep Grand Cherokee!
Best-Selling Shocks and Struts for 2000 Jeep Grand Cherokees
Enhance the driving experience in your Jeep with 14 quality Shocks and Strut components, starting at $13.29.
Rancho – RS5000X Shock Absorber (Part No.RS55128)
from
$85.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
- SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- Rebound Bumper
Monroe – Gas-Magnum Shock Absorber (Part No.34766)
from
$73.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic LT Shock Absorber (Part No.59386)
from
$52.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic LT Shock Absorber (Part No.59387)
from
$67.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Light Truck Shock Absorber (Part No.37161)
from
$69.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- 1-3/8 inch (34.9 mm) bore (On most applications)
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – OESpectrum Light Truck Shock Absorber (Part No.37162)
from
$84.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- 1-3/8 inch (34.9 mm) bore (On most applications)
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Rancho – RS5000 Shock Absorber (Part No.RS5260)
from
$69.99
The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.
Product Features:
See More
Product Features:
- Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
- 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
- 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
- Protective boot included – Protects the shock rod and oil seal
Rancho – RS5000X Shock Absorber (Part No.RS55239)
from
$96.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
- SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- Rebound Bumper
Rancho – RS5000X Shock Absorber (Part No.RS55260)
from
$93.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
- SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- Rebound Bumper
Skyjacker – Hydro Shock W/Red Boot (Part No.H7016)
from
$55.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Monroe – Gas-Magnum Shock Absorber (Part No.34769)
from
$70.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Skyjacker – Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.B8516)
from
$69.99
The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Twin Tube Construction
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity For MAX Heat Dissipation
- 360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
- Chrome Plated Shaft And Sintered Iron Piston
- Comes With Black Boot
Most Popular 2000 Jeep Grand Cherokee Air Suspension and Kits
Customize your Jeep with 1 Air Suspension and Kits products
like Suspension Self-Leveling Unit Fluids, all
priced under $6.29.
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Top Picks for 2000 Jeep Grand Cherokee Control Arms
Upgrade Jeep Grand Cherokees with top-quality Control Arms parts, including 27 OEM and aftermarket selections for your 2000 model.
MOOG – Control Arm (Part No.RK640773)
from
$99.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Dorman – Help – Control Arm Bolt Kit (Part No.14859)
from
$16.99
Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.
Product Features:
See More
Product Features:
- Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt.
- Durable construction – made of hardened steel to match the function and durability of the original part
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life
FEQ – Control Arm Bushing (Part No.L2030219632FEQ)
from
$9.41
The FEQ Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52088214)
from
$16.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Carquest Premium – Control Arm (Part No.800-94502)
from
$93.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
- Pre-installed bushings (when applicable) for easy installation
Dorman – Suspension Control Arm (Part No.522-476)
from
$153.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Suspension Control Arm.
- Suspension Control Arm.
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
MOOG – Control Arm (Part No.RK643183)
from
$181.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
MOOG – Control Arm (Part No.RK640797)
from
$83.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
MOOG – Control Arm Bushing (Part No.K200428)
from
$53.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
MOOG – Control Arm (Part No.RK641869)
from
$92.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Carquest Premium – Control Arm (Part No.800-94499)
from
$97.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
- Pre-installed bushings (when applicable) for easy installation
MOOG – Control Arm (Part No.RK620677)
from
$99.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
MOOG – Control Arm Bushing (Part No.K202016)
from
$43.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Crown Auto Jeep Replacmnt – Fully Boxed, Steel, With Bushings (Part No.52088355AB)
from
$69.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52088425)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – Fully Boxed, Steel, With Bushings (Part No.52088208AB)
from
$59.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Rare Parts – Control Arm (Part No.RP12246)
from
$145.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Dorman – Control Arm (Part No.L2000440738DOR)
from
$143.12
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
CTR – Control Arm (Part No.L2000440738CTR)
from
$112.02
Control Arm
Rare Parts – Control Arm (Part No.RP11838)
from
$105.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Moog – Control Arm (Part No.L20001172619MOG)
from
$95.50
The RK series is a more value driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.
Product Features:
See More
Product Features:
- Restores like-new steering and handling
- MOOG engineering-validated construction and design
- Easy to install
- MOOG R-Series (RK) line of control arms are the right choice for the value-driven repair
- OE fit and form geometry and alignment
Rare Parts – Control Arm Bush (Part No.RP19981)
from
$74.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Control Arm (Part No.L2000385964DOR)
from
$67.24
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.520-322)
from
$59.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Control Arm Bushing (Part No.L2030219632DOR)
from
$52.26
Restore a smooth ride, directional stability, and agile handling with Dorman’s suspension components. Dorman’s tough rubber construction ensures durability.
Product Features:
See More
Product Features:
- Direct replacement for a trouble-free installation
- Weather resistant
- Replace the worn bushing, not the entire control arm
- A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards
Rare Parts – Control Arm Bush (Part No.RP22061)
from
$47.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
ACDelco – Control Arm Bushing (Part No.L2030606825ACD)
from
$28.65
Control Arm Bushing
In-Demand Trailing Arms for 2000 Jeep Grand Cherokees
Select from 1 premium Trailing Arms parts for your 2000 Jeep Grand Cherokee.
Whiteline – Trailing Arm Upper Bushing (Part No.W51749)
from
$114.99
Suffering uneven tyre wear, unbalanced braking or a less predictable front end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Most Sold 2000 Jeep Grand Cherokee Coil and Leaf Springs
Explore our best-selling Jeep parts for the 2000 Grand Cherokee among 18 OEM and aftermarket options starting from $7.99.
MOOG – Coil Spring Insulator (Part No.K160061)
from
$18.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MOOG – Coil Spring Insulator (Part No.K160041)
from
$7.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MOOG – Coil Spring Set (Part No.80974)
from
$165.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Insulator (Part No.K160042)
from
$43.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MOOG – Coil Spring Insulator (Part No.K160040)
from
$26.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Crown Auto Jeep Replacmnt – Coil Spring Isolator, Left or Right Rear Lower (Part No.52088402AB)
from
$25.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52088257)
from
$15.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – OE Replacement (Part No.52088401)
from
$20.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.52088346AB)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Dorman – Front Lower Coil Spring Bracket Repair (Part No.926-079)
from
$94.99
When a coil spring mount corrodes, it often means replacing the entire axle assembly. This spring seat repair kit installs to replace only the failed front position coil spring bracket mount.
Product Features:
See More
Product Features:
- Cost-effective repair – this coil spring seat repair kit allows a rusted spring seat to be replaced independent of the entire axle assembly.
- Durable materials – carbon steel repair kit is coated in corrosion-resistant paint for a durable bolt-on repair with no welding required.
- Vehicle and position specific – designed to match original front spring mounting seat on Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Rare Parts – Coil Spring Insulator (Part No.RP46342)
from
$50.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Dorman – Front Lower Coil Spring Bracket (Part No.926-082)
from
$182.99
This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
Product Features:
See More
Product Features:
- Money-saving repair – this coil spring bracket allows repair of the rusted axle housing section and mount.
- Durable materials – carbon steel mount is coated in weldable primer for a clean weld-on repair.
- Vehicle and position specific – designed to match original mounts on certain Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Front Lower Coil Spring Bracket (Part No.926-083)
from
$129.99
This coil spring bracket is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
Product Features:
See More
Product Features:
- Money-saving repair – this coil spring bracket allows repair of the rusted axle housing section and mount.
- Durable materials – carbon steel mount is coated in weldable primer for a clean weld-on repair.
- Vehicle and position specific – designed to match original mounts on certain Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Front Lower Coil Spring Bracket Repair (Part No.926-078)
from
$94.99
When a coil spring mount corrodes, it often means replacing the entire axle assembly. This spring seat repair kit installs to replace only the failed front position coil spring bracket mount.
Product Features:
See More
Product Features:
- Cost-effective repair – this coil spring seat repair kit allows a rusted spring seat to be replaced independent of the entire axle assembly.
- Durable materials – carbon steel repair kit is coated in corrosion-resistant paint for a durable bolt-on repair with no welding required.
- Vehicle and position specific – designed to match original front spring mounting seat on Jeep vehicles
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Rare Parts – Coil Spring Insulator (Part No.RP46352)
from
$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Rare Parts – Coil Spring Insulator (Part No.RP46345)
from
$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Rare Parts – Coil Spring Insulator (Part No.RP46223)
from
$37.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Whiteline – Spring Pad Bushing (Part No.W73416)
from
$30.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Top-Rated Suspension Parts Brands For Your 2000 Jeep Grand Cherokee
Shop for the best-rated brands offering Suspension Parts and other products for your 2000 Jeep Grand Cherokees. Below you’ll find some of our best rated Suspension Parts from Monroe, Rancho, and Moog, and more. Suspension Parts from these brands that fit a 2000 Grand Cherokee start at just $7.99 and are rated as high as 4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Monroe 2000 Jeep Grand Cherokee Suspension Parts
When it comes to maintaining or upgrading your 2000 Jeep Grand Cherokee, using quality Suspension Parts is essential to ensure durability and a perfect fit. Monroe ticks all of those boxes. We offer a wide selection of Monroe Suspension Parts, specifically designed for the 2000 Jeep Grand Cherokee. With over 8 Monroe brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $56.03. Plus, with over 231 customer reviews and an average rating of 4 stars, you can trust that our Monroe Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$73.99
$73.99
(1)
“Fantastic shock! I put these on a 2001 Jeep Grand Cherokee with an inline 6 cylinder. They deliver a nice firm and very responsive ride, yet are very ”
Popular Rancho 2000 Jeep Grand Cherokee Suspension Parts
Rancho auto parts is one of the highest quality Suspension Part brands in the market. Any 2000 Jeep Grand Cherokee owner should feel confident when installing genuine Rancho parts in their vehicle. To ensure the best fit and performance for your 2000 Grand Cherokee, Advance Auto Parts carries a full inventory of 4 Rancho Suspension Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Rancho Suspension Parts range from $69.99 to $96.99, plus, with more than 5 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
FAQs for 2000 Jeep Grand Cherokee Suspension Parts
Which Suspension Parts are best-sellers for 2000 Jeep Grand Cherokees?
Out of 61 Suspension Parts that fit 2000 Jeep Grand Cherokees, the following parts are the top sellers:
- RS5000X Shock Absorber (11451454) – $85.99
- OESpectrum Light Truck Shock Absorber (19710599) – $69.99
- RS5000X Shock Absorber (11848756) – $96.99
What’s the price range for 2000 Jeep Grand Cherokee Suspension Parts?
Suspension Part prices for the 2000 Jeep Grand Cherokee start at $6.29 and go up to $182.99 for the most premium parts.
What’s the average price of a Suspension Part for a 2000 Jeep Grand Cherokee?
The average price for Suspension Parts for the 2000 Jeep Grand Cherokee is $69.49. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Jeep Grand Cherokee model years?
What are the cheapest Suspension Parts for my 2000 Jeep Grand Cherokee?
The cheapest 2000 Jeep Grand Cherokee Suspension Parts we carry in stock are:
- Max Performance Synthetic Power Steering Fluid (11150908) – $6.29
- Coil Spring Insulator (21880670) – $7.99
- Control Arm Bushing (10754932) – $9.41
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
What are the top-rated Suspension Parts that fit the 2000 Jeep Grand Cherokee?
Out of 1,040 reviews by customers, our 2000 Jeep Grand Cherokee Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2000 Jeep Grand Cherokee and their top-rated products:
- Shocks and Struts
- RS5000X Shock Absorber (11451454) – $85.99
- Gas-Magnum Shock Absorber (10722720) – $73.99
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Control Arms
- RS5000X Shock Absorber (11451454) – $85.99
- Gas-Magnum Shock Absorber (10722720) – $73.99
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
What types of Suspension Parts do you sell for my 2000 Jeep Grand Cherokee?
As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2000 Jeep Grand Cherokee:
Can I get help with 2000 Jeep Grand Cherokee Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Suspension Parts and more.
What is your return policy for Jeep Grand Cherokee Suspension Parts?
Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
