2000 Ford Expedition Drivetrains

Popular 2000 Ford Expedition Drivetrains Categories

Essential Drivetrains for 2000 Ford Expeditions

Felpro – Transfer Case Adapter Gasket (Part No.55484)

Transfer Case Adapter Gasket

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Pinion Gear And Thrust Washer For 9.75" Ford (Part No.33302)

Pinion Gear And Thrust Washer For 9.75" Ford

from

$30.99
Pinion gear thrust washer for 9.75″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 9.75″
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Driveworks – Axle Shaft Bearing (Part No.S-HK-4012)

Axle Shaft Bearing

from

$10.79
Product Features:
  • Brand may vary by location
See More

Carquest Premium – 4WD Actuator (Part No.EGA1444)

4WD Actuator

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

EMPI – Axle Shaft Nut (Part No.K4030200387EMP)

Axle Shaft Nut

from

$4.57
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Yukon Gear – Pinion Nut (Part No.33154)

Pinion Nut

from

$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:
  • Pinion nut for Ford 7.5″, 8″ and 9″
  • 3/4″ x 20 thread
  • 1 1/6″ socket
See More

Dorman – Rear Differential Cover (Part No.697-705)

Rear Differential Cover

from

$48.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od) (Part No.41048)

Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od)

from

$286.99
Yukon flange yoke for 8.8″ Ford passenger and 8.8″ Ford IFS truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • Round companion flange
  • 4.3″ O.D.
See More

Carquest Premium – 4WD Control Switch Connector (Part No.PTA1771)

4WD Control Switch Connector

from

$43.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

SKF – Axle Shaft Seal (Part No.K4021208072SKF)

Axle Shaft Seal

from

$15.73
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

USA Standard Gear – Bearing Kit For ’09 & Down Ford 8.8" (Part No.58007)

Bearing Kit For '09 & Down Ford 8.8"

from

$153.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and br

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – Cross Pin Shaft For 9.75" Ford (Part No.33337)

Cross Pin Shaft For 9.75" Ford

from

$49.99
Cross pin shaft for 9.75″ Ford.

Product Features:
  • Cross pin shaft
  • Fits Ford 9.75″
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11140)

CV Axle Shaft Assembly

from

$133.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Carquest Premium – 4WD Actuator (Part No.FWA1014)

4WD Actuator

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each)

from

$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

SKF – Pinion Seal (Part No.J7010427782SKF)

Pinion Seal

from

$19.78
Pinion Seal

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

EVO Driveline – Remanufactured Transfer Case (Part No.UMT431)

Remanufactured Transfer Case

from

$889.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

Yukon Gear – Pinion Install Kit For ’00-’07 Ford 9.75" Differential With ’11 & Up Ring & Pinion Set (Part No.13107)

Pinion Install Kit For '00-'07 Ford 9.75" Differential With '11 & Up Ring & Pinion Set

from

$389.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9.75″
  • Install 2011 and up Ring & Pinion into 2000 – 2007
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Pinion Nut (Part No.33147)

Pinion Nut

from

$26.99
Pinion nut for GM 7.6″ IRS, 8.6″ IRS and some Ford 9.75″, Check threads for proper fit before before installing. 22mm x 1.5mm, Uses 32mm socket.

Product Features:
  • Pinion nut for GM 7.6″ IRS and 8.6″ IRS and some Ford 9.75″
  • 22mm x 1.5 thread
  • 32mm socket
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Carquest Premium – 4WD Control Switch Connector (Part No.PTA1843)

4WD Control Switch Connector

from

$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Upgrade your 2000 Ford Expedition with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2000 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 438 Drivetrains for the 2000 Ford Expedition, designed to meet your needs without breaking the bank. From 4WD Component replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2000 Ford Expedition at great prices. Our Drivetrains inventory for this model ranges from just $1.99 to $3,089.99, with an average price of $265.47. Our 438 Drivetrains in stock come from 29 trusted brands, so you’re sure to find the right part for your 2000 Ford Expedition without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Ford Expedition, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Royal Purple, Moog, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Royal Purple and Moog also bring quality to the table, with Drivetrains available starting at $12.99, and at an average 5 stars rating. With 8,724 customer reviews and counting, our 2000 Ford Expedition Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place. Start shopping confidently below for your 2000 Ford Expedition!

Best-Selling 4WD Components for 2000 Ford Expeditions

Enhance the driving experience in your Ford with 10 quality 4WD Component components, starting at $32.99.

Dorman – Solenoid, 4WD Disengage And Emissions Purge (Part No.600-401)

Solenoid, 4WD Disengage And Emissions Purge

from

$53.99
This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications.
  • Effective fix – restores control of 4WD system impacted by failed original solenoid.
  • Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Solenoid, 4WD Engage And Emissions Purge (Part No.600-400)

Solenoid, 4WD Engage And Emissions Purge

from

$45.49
This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications.
  • Effective fix – restores control of 4WD system impacted by failed original solenoid.
  • Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – 4WD Vacuum Actuator, Front Axle (Part No.600-300)

4WD Vacuum Actuator, Front Axle

from

$169.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:
  • Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models.
  • Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator.
  • Smart solution – delivers reliable fit and function for competitive price
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Front Differential Shift Fork (Part No.600-560)

Front Differential Shift Fork

from

$47.99
This 4WD actuator fork directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality to the four-wheel drive system.

Product Features:
  • Ideal replacement – this 4WD actuator fork directly replaces the original equipment part on specific vehicle years, makes and models.
  • Effective fix – installation addresses inoperative four-wheel-drive actuation caused by failed original equipment fork.
  • Cost-effective solution – offers original equipment fit and function at a competitive price
  • Trustworthy quality – backed by a team of designers and engineers in the United States
See More

Carquest Premium – 4WD Switch (Part No.FWC1087)

4WD Switch

from

$94.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Four Wheel Drive Actuator Switch (Part No.FWD54)

Four Wheel Drive Actuator Switch

from

$85.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • All of our switches are made to OE spec to ensure proper fit, form and function
See More

Carquest Premium – 4WD Control Switch Connector (Part No.PTA2716)

4WD Control Switch Connector

from

$45.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – 4WD Control Switch Connector (Part No.PTA1771)

4WD Control Switch Connector

from

$43.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – 4WD Actuator (Part No.EGA1444)

4WD Actuator

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – 4WD Control Switch Connector (Part No.PTA1843)

4WD Control Switch Connector

from

$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Most Popular 2000 Ford Expedition Drive Shafts and Axles

Customize your Ford with 51 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Axle Shaft Universal Joints, all priced under $1,123.99.

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Driveworks – Oil Seal (Part No.S-100357)

Oil Seal

from

$9.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.FC-66998)

Bearings

from

$10.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11123)

CV Axle Shaft Assembly

from

$136.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1350X)

Universal Joint

from

$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

National – Bearings (Part No.HK-4012)

Bearings

from

$24.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)

R1561Tv Rear Axle Bearing And Seal Kit

from

$92.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford and Dodge applications
  • Includes axle bearing and seal
  • Torrington Brand
  • Services one side
  • 2.985″ O.D.
  • 1.700″ I.D.
See More

Dorman – Axle Support Bushing (Part No.905-540)

Axle Support Bushing

from

$32.49
This axle support bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Yukon Gear – Stub Axle Snap Ring Clip For 8.8" Ford IFS (Part No.33271)

Stub Axle Snap Ring Clip For 8.8" Ford IFS

from

$39.99
Stub axle snap ring clip for 8.8″ Ford IFS.

Product Features:
  • Stub axle snap ring
  • Fits Ford 8.8″ IFS
See More

National – Multi Purpose Seal (Part No.710754)

Multi Purpose Seal

from

$17.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Recognized worldwide for their quality and reliable performance for every type of repair
  • Temperature range: -40°F to 225°F; -40°C to 107°C
See More

Yukon Gear – 9.75" Ford C-Clip (Part No.33248)

9.75" Ford C-Clip

from

$16.99
9.75″ Ford C-Clip.

Product Features:
  • C-clip
  • Fits Ford 9.75″
See More

Dorman – Spindle Nut (Part No.K1002831650DOR)

Spindle Nut

from

$17.26
Spindle Nut

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od) (Part No.41048)

Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od)

from

$286.99
Yukon flange yoke for 8.8″ Ford passenger and 8.8″ Ford IFS truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • Round companion flange
  • 4.3″ O.D.
See More

Yukon Gear – Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing (Part No.30140)

Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing

from

$21.99
Axle seal for semi-floating Ford and Dodge with R1561TV bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits Ford and Dodge applications
  • 2.985″ O.D.
  • 1.700″ I.D.
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-031)

Front Drive Shaft: Greaseable, Adjustable

from

$1123.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-592)

Rear Drive Shaft: Greaseable, Adjustable

from

$705.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9317)

Drive Shaft: Not Greasable, Direct Replacement

from

$682.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.946-189)

Rear Drive Shaft: Adjustable

from

$677.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.986-243)

Rear Drive Shaft

from

$675.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.936-631)

Rear Drive Shaft

from

$638.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.946-595)

Rear Drive Shaft

from

$629.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

USA Standard Gear – Driveshaft – Front (Part No.44483)

Driveshaft - Front

from

$567.99
Driveshaft – Front

USA Standard Gear – Driveshaft – Front (Part No.44475)

Driveshaft - Front

from

$566.99
Driveshaft – Front

Dorman – Rear Drive Shaft: Adjustable (Part No.976-111)

Rear Drive Shaft: Adjustable

from

$537.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-074)

Front Drive Shaft: Greaseable, Adjustable

from

$505.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – AXLE ASSEMBLY (Part No.K4000419495DOR)

AXLE ASSEMBLY

from

$320.69
AXLE ASSEMBLY

Dorman – Axle Shaft (Part No.K4005419488DOR)

Axle Shaft

from

$313.04
Axle Shaft

Yukon Gear – Yoke For Ford 8.8" Truck U/Joint Size (5" Od) (Part No.41050)

Yoke For Ford 8.8" Truck U/Joint Size (5" Od)

from

$221.99
Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • Round companion flange
  • 5.00″ O.D.
See More

FAG US – AXLE SHAFT REPAIR BE (Part No.DR0134K)

AXLE SHAFT REPAIR BE

from

$111.99
AXLE SHAFT REPAIR BE

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$97.49
Wheel Bearing

Spicer – Universal Joint (Part No.5-1410-1X)

Universal Joint

from

$55.99
Universal Joint

Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)

Plug Adapter For Extra-Large Clamshell

from

$47.99
Plug adapter for extra-large clamshell. No Return.

Product Features:
  • Plug adapter for Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – 8.8" IFS Side Stub Axle Seal, Left Hand & Right Hand (Part No.30256)

8.8" IFS Side Stub Axle Seal, Left Hand & Right Hand

from

$40.99
8.8″ IFS side stub axle seal, left hand & Right hand.Yukon Mighty seal.

Product Features:
  • Front inner axle seal
  • Fits Ford 8.8″ IFS
See More

FAG US – AXLE BEARING (Part No.FC68302)

AXLE BEARING

from

$35.49
AXLE BEARING

SKF – Axle Shaft Seal (Part No.K4021208072SKF)

Axle Shaft Seal

from

$15.73
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

SKF – Diff. Bearing Shaft (Part No.J7005197065SKF)

Diff. Bearing Shaft

from

$14.46
Diff. Bearing Shaft

SKF – Axle Seal (Part No.K4021285310SKF)

Axle Seal

from

$14.20
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

FAG US – BEARING (Part No.BR1682)

BEARING

from

$12.49
BEARING

Autopart International Inc – Wheel Seal (Part No.K80101933826API)

Wheel Seal

from

$11.40
Wheel Seal

Driveworks – Axle Shaft Bearing (Part No.S-HK-4012)

Axle Shaft Bearing

from

$10.79
Product Features:
  • Brand may vary by location
See More

Top Picks for 2000 Ford Expedition Universal Joints

Upgrade Ford Expeditions with top-quality Universal Joints parts, including 23 OEM and aftermarket selections for your 2000 model.

Spicer – Universal Joint (Part No.5-213X)

Universal Joint

from

$39.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Driveworks – Universal Joint (Part No.DW-354)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Universal Joint (Part No.DW-331)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

Non-Greaseable Super Strength Universal Joint

from

$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Greaseable Premium Universal Joint

from

$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Driveworks – Universal Joint (Part No.DW-270)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Spicer – Universal Joint (Part No.5-1330X)

Universal Joint

from

$37.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – Flange Yoke For Ford 9.75" (Part No.41066)

Flange Yoke For Ford 9.75"

from

$159.99
Yukon flange yoke for Ford 9.75″. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9.75″
  • 31 spline
See More

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

1330 Dual-Size Cap U/Joint

from

$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

1350 U/Joint With Zerk Fitting

from

$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More

GMB – Universal Joint – Greasable (Part No.K1010481404GMB)

Universal Joint - Greasable

from

$32.60
Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.

Product Features:
  • Elliptical bearing design delivers reliable performance under the heaviest of loads
  • Exclusive GMB Ultra-select bearing design exceeds OE specification
  • Precision finish trunnions and bearing surfaces ensure durability
  • Proven reliability in off-road conditions and harsh environments
See More

Spicer – Lube For Life Non Greasable U-Joint (Part No.K1010991370SPI)

Lube For Life Non Greasable U-Joint

from

$49.21
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they’re pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, as well as greasable and non-greasable styles. Order the model designed for fitment with your vehicle and engine type.

Product Features:
  • Forged cross
  • Lubeable
  • O.E.M replacement
  • Snap rings
See More

Yukon Gear – Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size (Part No.41049)

Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size

from

$209.99
Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

1350 To Mechanics 3R Adaptor U/Joint

from

$111.99
Yukon 1350 to Mechanics 3R adaptor U/joint.
See More

Spicer – Universal Joint (Part No.5-1350-1X)

Universal Joint

from

$49.99
Universal Joint

Spicer – Universal Joint (Part No.5-1330-1X)

Universal Joint

from

$36.99
Universal Joint

ACDelco – Professional U-Joint (Part No.K1010577081ACD)

Professional U-Joint

from

$32.05
An ACDelco Professional, premium aftermarket Universal Joint provides pivot points for driveshafts and is the ideal high-quality aftermarket replacement component for many vehicles on the road today. A universal joint is comprised of a pair of hinges connected at a right angle that transmits power between two driveshafts. This premium aftermarket replacement universal joint is manufactured to meet your expectations for fit, form, and function. ACDelco offers a full line of Professional, premium aftermarket Chassis Parts to keep vehicles riding and handling like new. With competitive warranty coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it’s no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.

Product Features:
  • Pivot points for driveshafts in your vehicle
  • Comprised of a pair of hinges connected at a right angle
  • Premium, high-quality aftermarket part
  • Thoroughly engineered to meet or exceed your expectations for fit, form, and function
  • Provides the performance and dependability you expect from ACDelco
See More

Autopart International Inc – U Joint (Part No.K10101976375API)

U Joint

from

$24.18
U Joint

Yukon Gear – DrvShftPinYoke (Part No.33574)

DrvShftPinYoke

from

$12.99
DrvShftPinYoke

In-Demand Differentials for 2000 Ford Expeditions

Select from 320 premium Differentials parts for your 2000 Ford Expedition, with prices ranging from $1.99 to $3,089.99.

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

from

$12.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:
  • Better Wear Protection
  • Increased Protection against Low Speed Pre-Ignition
  • Increased Fuel Efficiency
  • Better Protection for Vehicle Exhaust Emissions Equipment
  • Improved Compatibility with Fuels Containing Ethanol
  • Superior Corrosion Protection
  • Made in USA
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

from

$25.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:
  • Maximizes horsepower
  • Extends gear and bearing life
  • Reduces operating temperature
  • Lower coefficient of friction
  • Superior corrosion protection
  • Separates rapidly from water
  • For use with open, limited-slip and locking differential
  • Contains limited-slip friction modifier
  • Made in USA
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

from

$69.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55476)

DIFFERENTIAL GASKET

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Rear Differential Cover (Part No.697-705)

Rear Differential Cover

from

$48.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Oil Seal (Part No.S-4278)

Oil Seal

from

$9.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.HM89443)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Dorman – Rear Axle Shaft, Right (Part No.630-215)

Rear Axle Shaft, Right

from

$166.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Motive Gear – Axle Shaft (Part No.MG2192)

Axle Shaft

from

$116.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT 8.8″ 31 3/4″ R.H. 12&14 MM STUDS
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R9.75FRLMK)

Differential Master Bearing Kit - Koyo

from

$319.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • FORD 9.75 99-ON
See More

Dorman – Rear Axle Shaft, Left (Part No.630-216)

Rear Axle Shaft, Left

from

$160.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R9.75FRLMKT)

Differential Master Bearing Kit - Timken

from

$281.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • FORD 9.75 99-ON
See More

Motive Gear – Differential Ring and Pinion (Part No.F8.8-410A)

Differential Ring and Pinion

from

$179.99


Product Features:
  • FRD 10BL 8.8 R/P 4.10A MG
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Felpro – Differential Cover Gasket (Part No.RDS 55341)

Differential Cover Gasket

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Taper Bearing Set (Part No.S-A-18)

Taper Bearing Set

from

$10.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Rear Differential Cover (Part No.697-702)

Rear Differential Cover

from

$34.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Motive Gear – Differential Carrier Gear Kit (Part No.F8.8BI)

Differential Carrier Gear Kit

from

$96.99


Product Features:
  • FRD 8.8″ INT. KIT 31 SPL OPEN 1987 & LATER ONLY
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Rear Axle Shaft, Right (Part No.630-212)

Rear Axle Shaft, Right

from

$177.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Motive Gear – Differential Pinion Nut (Part No.379570S)

Differential Pinion Nut

from

$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Dorman – Rear Axle Shaft, Left (Part No.630-213)

Rear Axle Shaft, Left

from

$172.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

National – Wheel Bearing and Seal Kit (Part No.RA-311)

Wheel Bearing and Seal Kit

from

$169.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Spindle bearing and seal kit
  • Includes all components required to complete the repair
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Cylindrical Bearing (Part No.S-R1561TV)

Cylindrical Bearing

from

$31.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Wheel Bearing and Seal Kit (Part No.RA-311MK)

Wheel Bearing and Seal Kit

from

$115.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Spindle bearing and seal kit
  • Includes all components required to complete the repair
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

National – Bearings (Part No.208)

Bearings

from

$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-3604)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

ATP – DIFF COVER KIT (Part No.111103)

DIFF COVER KIT

from

$37.99
DIFF COVER KIT

Motive Gear – Differential Clutch Pack (Part No.F8.8CPK)

Differential Clutch Pack

from

$123.99


Product Features:
  • CLUTCH PACK KIT 8.8″ FORD 1 KIT PER UNIT
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

from

$19.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Cover Bolt For Ford 7.5", 8.8" & 9.75"

from

$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • Cut to length design fits 40″-43.5″ applications
  • Fits Dana Spicer 60, 70 and 80
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81056)

Pinion Crush Sleeves

from

$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

Motive Gear – Ring Gear Bolt (Part No.F75Z4216AA)

Ring Gear Bolt

from

$5.49


Product Features:
  • F9.75″ RING GEAR BOLT SOLD INDIVIDUALLY
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Crush Sleeve (Part No.33085)

Crush Sleeve

from

$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:
  • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
  • 0.480″ tall
See More

Yukon Gear – Ford 9.75" Ring Gear Bolt (Part No.33045)

Ford 9.75" Ring Gear Bolt

from

$10.99
Ford 9.75″ ring gear bolt. 12mm x 1.25.

Product Features:
  • Ring gear bolt for Ford 9.75″
  • 12mm x 1.25
See More

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Pinion gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)

Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc

from

$5.99
Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.

Product Features:
  • Ring gear bolt for Ford 7.5″ and 8.8″
  • 7/16″ x 20
See More

Most Sold 2000 Ford Expedition Transfer Cases

Explore our best-selling Ford parts for the 2000 Expedition among 25 OEM and aftermarket options starting from $4.79.

National – Bearings (Part No.M88048)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.3946)

Multi Purpose Seal

from

$25.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Remanufactured Transfer Case Motor (Part No.48-207)

Remanufactured Transfer Case Motor

from

$102.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Dorman – Transfer Case Shift Motor (Part No.600-802)

Transfer Case Shift Motor

from

$122.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:
  • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
  • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
  • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
  • Quality assured – vehicle-specific application has been validation tested to ensure quality
See More

National – Multi Purpose Seal (Part No.4503N)

Multi Purpose Seal

from

$21.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Transfer Case Gasket (Part No.917-522)

Transfer Case Gasket

from

$10.79
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications.
  • Effective fix – restores a tight seal in the transfer case after original gasket fails.
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Oil Seal (Part No.S-3946)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Felpro – Transfer Case Adapter Gasket (Part No.55484)

Transfer Case Adapter Gasket

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

EVO Driveline – Transfer Case Assembly (Part No.UMT431M)

Transfer Case Assembly

from

$1161.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

EVO Driveline – Remanufactured Transfer Case (Part No.UMT431)

Remanufactured Transfer Case

from

$889.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

USA Standard Gear – TRANSFER CASE PARTS (Part No.72057)

TRANSFER CASE PARTS

from

$144.99
TRANSFER CASE PARTS

EVO Driveline – Transfer Case Motor (Part No.UMM4407)

Transfer Case Motor

from

$142.99
Transfer Case Motor

USA Standard Gear – TCaseBrg-SealKit (Part No.76401)

TCaseBrg-SealKit

from

$132.99
TCaseBrg-SealKit

SKF – Trans Case Output Sh (Part No.J7121223394SKF)

Trans Case Output Sh

from

$64.47
Trans Case Output Sh

Timken – Trans Case Output Sf (Part No.J7121366772TIM)

Trans Case Output Sf

from

$36.72
Trans Case Output Sf

FAG US – BEARING (Part No.6208-C3)

BEARING

from

$24.79
BEARING

SKF – Trans Case Output Sh (Part No.J7121366773SKF)

Trans Case Output Sh

from

$18.40
Trans Case Output Sh

FAG US – BEARING (Part No.6207)

BEARING

from

$15.49
BEARING

FAG US – BEARING CONE (Part No.KLM12749)

BEARING CONE

from

$13.29
BEARING CONE

Dorman – Transfer Case Gasket (Part No.J71331098749DOR)

Transfer Case Gasket

from

$13.10
Transfer Case Gasket

FAG US – CUP (Part No.M88010)

CUP

from

$11.29
CUP

Autopart International Inc – Trans Case Output Sh (Part No.J71212043276API)

Trans Case Output Sh

from

$9.56
Trans Case Output Sh

USA Standard Gear – TCaseOutputShaftSeal (Part No.72252)

TCaseOutputShaftSeal

from

$9.29
TCaseOutputShaftSeal

USA Standard Gear – TCaseInputShaftSeal (Part No.75651)

TCaseInputShaftSeal

from

$5.99
TCaseInputShaftSeal

Top-Rated Drivetrains Brands For Your 2000 Ford Expedition

Shop for the best-rated brands offering Drivetrains and other products for your 2000 Ford Expeditions. Below you’ll find some of our best rated Drivetrains from Valvoline, Royal Purple, and Moog, and more. Drivetrains from these brands that fit a 2000 Expedition start at just $12.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2000 Ford Expedition Drivetrains

When it comes to maintaining or upgrading your 2000 Ford Expedition, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2000 Ford Expedition. With over 5 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $31.09. Plus, with over 419 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

DEX/MERC Automatic Transmission Fluid, 1 Gallon
from
$35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

“Equivalent to oem”

Popular Royal Purple 2000 Ford Expedition Drivetrains

Royal Purple auto parts is one of the highest quality Drivetrain brands in the market. Any 2000 Ford Expedition owner should feel confident when installing genuine Royal Purple parts in their vehicle. To ensure the best fit and performance for your 2000 Expedition, Advance Auto Parts carries a full inventory of 3 Royal Purple Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Royal Purple Drivetrains range from $12.99 to $25.99, plus, with more than 139 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
from
$12.99
This product is not rated

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

“”

FAQs for 2000 Ford Expedition Drivetrains

Which Drivetrains are best-sellers for 2000 Ford Expeditions?

Out of 438 Drivetrains that fit 2000 Ford Expeditions, the following parts are the top sellers:

What’s the price range for 2000 Ford Expedition Drivetrains?

Drivetrain prices for the 2000 Ford Expedition start at $1.99 and go up to $3,089.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2000 Ford Expedition?

The average price for Drivetrains for the 2000 Ford Expedition is $265.47. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford Expedition model years?

Yes, we currently carry Drivetrains for 27 model years of Ford Expeditions between 1997 and 2024. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2024, 2021, 2020, 2019, 2018, 2017, and 2016.

What are the cheapest Drivetrains for my 2000 Ford Expedition?

The cheapest 2000 Ford Expedition Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2000 Ford Expedition?

Out of 8,724 reviews by customers, our 2000 Ford Expedition Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2000 Ford Expedition and their top-rated products:

What types of Drivetrains do you sell for my 2000 Ford Expedition?

Can I get help with 2000 Ford Expedition Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford Expedition Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford Expedition Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.