2024 Ford Expedition Drivetrains
Find Your Specific 2024 Ford Expedition Drivetrains
Below you will find various in-demand Ford Drivetrains, components and accessories for your 2024 Expedition. Advance Auto Parts has popular Expedition parts like Differentials Drive Shafts and Axles and more. You’ll also find aftermarket and OEM Drivetrains for other Expedition model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2024 Ford Expedition Drivetrains below and start saving instantly.
Popular 2024 Ford Expedition Drivetrains Categories
Essential Drivetrains for 2024 Ford Expeditions
LuK – Repair Kit, Differential (Part No.GDK311)
from
$251.99
Each LuK Differential Bearing Kit contains all the OE quality bearings needed for a professional transmission repair. Differential bearing kits are the perfect repair solution for a broken transmission. We carefully select OE quality components for each individual transmission for a professional repair.
Product Features:
See More
Product Features:
- LuK Differential Bearing Kits are designed to meet or exceed OEM requirements. This will ensure customer satisfaction.
- LuK Differential Bearing Kits contain the bearings and seals needed to complete the job.
- LuK Differential Bearing Kits include wear parts such as seals, O-rings, shaft sealing rings, support bearings and spare parts where necessary for eliminating the specific cause of failure.
Motive Gear – Differential Bearing Kit – Timken (Part No.R9.75FRT)
from
$179.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- BRG & SEAL KIT FORD 9.75 RING GEAR TIMKEN
Yukon Gear – Ford 9.75" Ring Gear Bolt (Part No.33045)
from
$10.99
Ford 9.75″ ring gear bolt. 12mm x 1.25.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 9.75″
- 12mm x 1.25
ARP Auto Racing – For Use With Ford 8.8 And 9" Using 3/4"Socket, 0.75"L Under Head, 7/16"-20 (Part No.250-3003)
from
$43.99
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with today sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. they are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.
Product Features:
See More
Product Features:
- Forged From Premium Grade 8740 Chrome Moly Steel
- Heat Treated
- Nominally Rated At 200,000 Psi Tensile Strength
- Specially Hardened, Precision Ground Washers
- 0.75″ Underhead Length
- 200,000 PSI
- Sold As A Set
Driveworks – Oil Seal (Part No.S-4278)
from
$11.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Schaeffler – Shaft Seal (Part No.SS2865)
from
$15.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV428572)
from
$102.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV428573)
from
$144.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
USA Standard Gear – Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 4.56 Ratio (Part No.36130)
from
$364.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 4.56 ratio
Dorman – Differential Ring and Pinion Set (Part No.697-353)
from
$1115.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
- Effective fix – eliminates grinding and whining from failed original bearings
- Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
- Trustworthy quality – backed by team of designers and engineers in the United States
Motive Gear – Differential Ring and Pinion (Part No.F8.8-456)
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – Pinion Depth Shims For Ford 9.75" (Part No.55007)
from
$32.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion depth shims for Ford 9.75″
Motive Gear – Differential Pinion Shim Kit (Part No.1136R)
from
$17.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)
from
$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
Dorman – Suspension Differential Mount Bushing (Part No.541-010)
from
$63.99
This differential mount bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Royal Purple – MaxGear SAE 75W90 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01300)
from
$24.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.
Product Features:
See More
Product Features:
- Maximizes horsepower
- Extends gear and bearing life
- Reduces operating temperature
- Lower coefficient of friction
- Superior corrosion protection
- Separates rapidly from water
- For use with open, limited-slip and locking differential
- Contains limited-slip friction modifier
- Made in USA
Valvoline – Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822389)
from
$13.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 5 Gallon (Part No.VV981)
from
$329.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$35.99
Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
USA Standard Gear – Standard Spider Gear Set For Ford 9.75" (Part No.39019)
from
$188.99
Product Features:
See More
- Spider gear kit
- Fits Ford 9.75″ open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)
from
$209.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 31 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.99
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
USA Standard Gear – Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline (Part No.39032)
from
$299.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 31 spline Trac Loc positraction
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Motive Gear – Differential Carrier Shim Kit (Part No.1135R)
from
$49.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Upgrade your 2024 Ford Expedition with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2024 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Drivetrains for the 2024 Ford Expedition, designed to meet your needs without breaking the bank.
From
Differential
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2024 Ford Expedition at great prices.
Our Drivetrains inventory for this model
ranges from just $1.99 to $564.99, with
an average price of $181.05.
Our 27 Drivetrains in stock come from 9 trusted brands, so you’re sure to find the right part for your 2024 Ford Expedition without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2024 Ford Expedition, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline Driveworks, and more.
Valvoline Drivetrains
start at just $35.99 and boast an impressive 4.8 stars average rating from customers.
With 2,704 customer reviews and counting, our 2024 Ford Expedition Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals
and more to make sure your 2024 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place.
Start shopping confidently below for your 2024 Ford Expedition!
Best-Selling Differentials for 2024 Ford Expeditions
Enhance the driving experience in your Ford with 25 quality Differential components, starting at $1.99.
Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$35.99
Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Driveworks – Oil Seal (Part No.S-4278)
from
$11.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.99
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)
Motive Gear – Differential Carrier Shim Kit (Part No.1135R)
from
$49.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)
USA Standard Gear – Standard Spider Gear Set For Ford 9.75" (Part No.39019)
from
$188.99
Product Features:
See More
- Spider gear kit
- Fits Ford 9.75″ open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Motive Gear – Differential Bearing Kit – Timken (Part No.R8.8RIFST)
from
$137.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- FORD 8.8IFS BEARING KIT ’97-UP NO AXLE SEALS IN KIT
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.8RIFSMK)
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Motive Gear – Differential Pinion Shim Kit (Part No.1136R)
from
$17.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 4.11 Ratio (Part No.24101)
from
$564.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 4.11 ratio
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 3.31 Ratio (Part No.24356)
from
$564.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 3.31 ratio
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 3.55 Ratio (Part No.24357)
from
$564.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 3.55 ratio
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 4.56 Ratio (Part No.24102)
from
$469.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 4.56 ratio
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 4.88 Ratio (Part No.24103)
from
$439.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 4.88 ratio
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 3.73 Ratio (Part No.24358)
from
$384.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits reverse rotation Ford 8.8″
- 8.80″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 3.73 ratio
Motive Gear – Performance Differential Ring and Pinion (Part No.F888488IFS)
Motive Gear – INT FORD 9.75" 34 SPLINE OPEN (Part No.F9.75BI)
from
$201.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.8RIFSMKT)
Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.8RIFS)
from
$124.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- FORD 8.8IFS BEARING KIT ’97-UP NO AXLE SEALS IN KIT
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Dorman – Suspension Differential Mount Bushing (Part No.541-010)
from
$63.99
This differential mount bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Castrol – Transmax ATF/CVT Universal Transmission Fluid, Smooth Performance, 1 Gallon (Part No.15E0C8)
from
$28.99
Castrol® Transmax® ATF/CVT Universal is a premium full-synthetic transmission fluid engineered for exceptional performance in both traditional step-shifting automatic transmissions and modern continuously variable transmissions (CVTs). Featuring Castrol Smooth Drive® Technology, it ensures enhanced friction durability for seamless gear shifts and superior high-temperature protection to resist oxidation. This advanced formulation offers unmatched protection against copper corrosion, extending the life of your transmission system. Its broad compatibility covers a wide range of ATF and CVT applications, including Dexron VI, Mercon LV, Toyota WS, Honda DW-1, Nissan Matic S, and many more, making it ideal for diverse vehicle types, including hybrids. Designed to improve workshop efficiency and simplify inventory management, this fluid is a versatile solution for professional mechanics and DIY enthusiasts alike. Packaged in a convenient 1-gallon size, it delivers outstanding value and reliability for maintaining optimal transmission performance.
Product Features:
See More
Product Features:
- Enhanced friction durability for smooth transmission performance
- Superior high temperature protection to effectively resist oxidation
- Unsurpassed protection against copper corrosion
- Broad scope of vehicle applications improves workshop efficiency and inventory management
- ATF Applications: Dexron VI (Dexron III, Dexron), Mercon LV (Mercon SP, Mercon V, Mercon), JASO 1A (03), JASO 1A LV (13), Toyota T IV, Toyota T III, Toyota WS, Honda/Acura DW 1/Z 1, Nissan Matic D, Matic J, Matic S, Hyundai/Kia SP IV, SP III
- ATF Applications: Mazda ATF M-V, M-III, FZ, Mitsubishi SP IV, SP III, IIM, II, PA, J3, VW/Audi (6, 8 & 9 speed automatics), BMW/Mini (6, 8 and 9 speed automatics), Jaguar/Land Rover (6, 8 & 9 speed automatics), Porsche (6, 8 & 9 speed automatics)
- ATF Applications: Volvo (6, 8 and 9 speed automatics), Volvo Transmission Oil 97342, AT102, Mercedes-Benz (7 and 9 speed automatics)
- CVT Applications: Toyota CVT Fluid TC, Toyota CVT Fluid FE , Nissan CVT Fluid NS-1, Nissan CVT Fluid NS-2, Nissan CVT Fluid NS-3, Subaru i-CVT Fluid, Subaru i-CVT FG, Subaru Lineartronic High Torque Chain CVTF, Honda HCF-2
Most Popular 2024 Ford Expedition Drive Shafts and Axles
Customize your Ford with 2 Drive Shafts and Axles products
like Drive Shaft and Axles, all
priced under $191.99.
Carquest Premium – New CV Axle (Part No.NCV11157)
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV548982)
from
$155.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Top-Rated Drivetrains Brands For Your 2024 Ford Expedition
Shop for the best-rated brands offering Drivetrains and other products for your 2024 Ford Expeditions. Below you’ll find some of our best rated Drivetrains from Valvoline and Driveworks, and more. Drivetrains from these brands that fit a 2024 Expedition start at just $11.99 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 2024 Ford Expedition Drivetrains
When it comes to maintaining or upgrading your 2024 Ford Expedition, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2024 Ford Expedition. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99. Plus, with over 446 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$35.99
(446)
MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon
“Good quality great price”
Popular Driveworks 2024 Ford Expedition Drivetrains
Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 2024 Ford Expedition owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2024 Expedition, Advance Auto Parts carries a full inventory of 1 Driveworks Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Driveworks Drivetrains range up to $11.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
FAQs for 2024 Ford Expedition Drivetrains
Which Drivetrains are best-sellers for 2024 Ford Expeditions?
Out of 27 Drivetrains that fit 2024 Ford Expeditions, the following parts are the top sellers:
- Differential Carrier Shim Kit (19640063) – $8.99
- Ring Gear Bolt (20520509) – $1.99
- New CV Axle (10857670) – $191.99
What’s the price range for 2024 Ford Expedition Drivetrains?
Drivetrain prices for the 2024 Ford Expedition start at $1.99 and go up to $564.99 for the most premium parts.
What’s the average price of a Drivetrain for a 2024 Ford Expedition?
The average price for Drivetrains for the 2024 Ford Expedition is $181.05. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Ford Expedition model years?
What are the cheapest Drivetrains for my 2024 Ford Expedition?
The cheapest 2024 Ford Expedition Drivetrains we carry in stock are:
- Ring Gear Bolt (20520509) – $1.99
- Differential Carrier Shim Kit (19640063) – $8.99
- Differential Pinion Solid Spacer Kit w/Shims (20520230) – $10.49
- Oil Seal (15440046) – $11.99
- SHIM KIT (50243695) – $17.49
What are the top-rated Drivetrains that fit the 2024 Ford Expedition?
Out of 2,704 reviews by customers, our 2024 Ford Expedition Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2024 Ford Expedition and their top-rated products:
- Differentials
- Oil Seal (15440046) – $11.99
- MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (8150020) – $35.99
- Differential Carrier Shim Kit (19640063) – $8.99
What types of Drivetrains do you sell for my 2024 Ford Expedition?
As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 2024 Ford Expedition:
Can I get help with 2024 Ford Expedition Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.
What is your return policy for Ford Expedition Drivetrains?
Advance Auto Parts keeps returns simple. For new Ford Expedition Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
