2000 Acura Integra Catalytic Converters

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322304. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds

Product Features:

• EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
• NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 408064 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22636. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1992-1995 Honda Civic, 1994-1995 Honda Accord, and more, this direct-fit catalytic converter also interchanges with OE parts 18150-P0A-A02 and 18150-P0A-A12, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds

Walker an industry leader for import And domestic applications, offers Walker CalCat Universal Catalytic Converters, available for OBDII (1996 And newer) vehicles And Pre-OBD (1995 And older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker CalCat Catalytic Converters are legal for sale in the state of California, And any state complying with California regulations.

Product Features:

• Legal for sale in the state of California, complies with C.A.R.B. regulations
• Stainless steel body with aluminized pipe and heat shields for durability
• Expandable bushings for custom installation requirements
• Universal converter may require modification to complete installation

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22639. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-2001 Acura Integra and interchanges with OE parts 18160-P72-A10 and 18160-P72-A20, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system, away from adjacent car parts and flammable materials positioned under the vehicle. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.

Product Features:

• Direct replacement ensures a proper fit every time
• For extra protection our Heat Shield Bolts are galvanized for rust-resistance
• Easy to install – No special tools required during installation
• Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality

The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.

Product Features:

• Direct replacement ensures a proper fit every time
• For extra protection our Heat Shield Bolts are galvanized for rust-resistance
• Easy to install – No special tools required during installation
• Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
• HEAT RESISTANT – Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS – Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
• HEAT RESISTANT – Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS – Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
• HEAT RESISTANT – Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS – Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade