1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads
More 1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads
Find your specific 1999 Ford F-550 Super Duty original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads
Mahle – Cyl. Head Bolt Set (Part No.A3031579174MAH)
from
$166.44
Cyl. Head Bolt Set
Mahle – Cyl. Head Bolt Set (Part No.A3031579166MAH)
from
$130.08
Cyl. Head Bolt Set
Mahle – Cyl. Head Bolt Set (Part No.A3031566828MAH)
from
$68.99
Cyl. Head Bolt Set
Sealed Power – Engine Exhaust Valve (Part No.V-4603)
from
$16.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Intake Valve (Part No.V-3956)
from
$10.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Intake Valve (Part No.V-4602)
from
$11.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0009)
from
$33.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)
from
$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)
from
$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Sealed Power – Engine Rocker Arm (Part No.R-1096)
from
$20.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Mahle – Cylinder Head Gasket Set (Part No.A8010414959MAH)
from
$1043.96
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head sets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials in all head sets
- Packaged in shrink wrapped tray
- Every part you need to complete your gasket repair in one package unless otherwise stated
Felpro – Cylinder Head Gasket Set (Part No.HS 26565 PT)
from
$462.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
MAHLE Original – Head Set (Part No.HS54657)
from
$613.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26662 PT)
from
$53.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- UNIQUE COMBUSTION SEAL – Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9239 PT)
from
$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Manufactured for the repair environment
- Unsurpassed quality you can trust
MAHLE Original – Cylinder Head Gasket (Part No.54657)
from
$74.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Cylinder head gaskets are sold individually and may require new head bolts based on application.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
MAHLE Original – HEAD BOLT SET (Part No.GS33494)
from
$96.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
MAHLE Original – Cylinder Head Bolts (Part No.GS33495)
from
$128.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-10093-01)
from
$88.99
Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72944)
from
$69.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Sealed Power – Engine Valve Lifter (Part No.HT-2271)
from
$10.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2305)
from
$15.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2104)
from
$15.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Dorman – Valve Cover – Left Side (Part No.264-997)
from
$334.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing..
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function.
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Dorman – Valve Covers: Direct Replacement, Stamped Steel, Passenger Side (Part No.264-5116)
from
$118.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Dorman – Valve Covers: Direct Replacement, Stamped Steel, Driver Side (Part No.264-5117)
from
$162.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Dorman – Valve Covers: With Gasket, Direct Replacement, Stamped Steel, Passenger Side (Part No.264-960)
from
$281.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Popular 1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads Categories
1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1999 Ford F-550 Super Duty. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 19 different Valve Cover and Cylinder Heads in our inventory ranging from $10.49 to $304.99. That means you can find the exact parts or products you need to keep that 1999 Ford F-550 Super Duty running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Ford F-550 Super Duty. Sealed Power, Felpro, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1999 Ford F-550 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1999 Ford F-550 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1999 Ford F-550 Super Duty Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Ford F-550 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your F-550 Super Duty the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Felpro Valve Cover and Cylinder Heads
We carry Felpro parts in our stock across Cylinder Head Gaskets categories, plus more. For a 1999 Ford F-550 Super Duty, our most popular Felpro Valve Cover and Cylinder Heads include:
Top 1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1999 Ford F-550 Super Duty. Popular Sealed Power parts include:
FAQs for 1999 Ford F-550 Super Duty Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1999 Ford F-550 Super Duty?
Out of 19 Valve Cover and Cylinder Heads for the 1999 Ford F-550 Super Duty, the most popular in our inventory are:
