1999 Acura CL Steering and Chassis Parts

Essential Steering and Chassis Parts for 1999 Acura CLs

MOOG – Strut Rod Bushing Kit (Part No.K9733)

Strut Rod Bushing Kit

from

$60.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Driveworks – Steering Tie Rod End (Part No.DW-EV415)

Steering Tie Rod End

from

$14.79
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure promote improved steering response and durability.
See More

MOOG – Caster/Camber Shim (Part No.K100320)

Caster/Camber Shim

from

$5.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Part can help bring vehicle back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • Loose or worn chassis parts can lead to premature tire wear
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Driveworks – Ball Joint (Part No.DW-K90490)

Ball Joint

from

$9.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

MTC – P/S Hose O-Ring (Part No.M2019377065MTC)

P/S Hose O-Ring

from

$2.70
P/S Hose O-Ring

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620284)

Suspension Control Arm and Ball Joint Assembly

from

$134.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5290)

Remanufactured Power Steering Pump

from

$244.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Tie Rod End (Part No.DW-ES3490)

Tie Rod End

from

$25.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

TRW – Sway Bar Bushing Kit (Part No.L1049463652TRW)

Sway Bar Bushing Kit

from

$19.85
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Corteco – P/S Seal (Part No.M2080947942CFW)

P/S Seal

from

$10.70
P/S Seal

International Suspension Group – Sway Bar Link (Part No.L1030142489ISG)

Sway Bar Link

from

$20.70
Sway Bar Link

Beck/Arnley – Power Steering Hose – Return (Part No.109-8007)

Power Steering Hose - Return

from

$22.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made from a high grade rubber compound
  • No modification needed for installation
  • Quality construction for durability
  • Application specific for this vehicle
See More

Dorman – Power Steering Reservoir: White; Gray; Red, Plastic, Original Equipment Replacement (Part No.603-684)

Power Steering Reservoir: White; Gray; Red, Plastic, Original Equipment Replacement

from

$42.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
  • Complete assembly – includes reservoir and reservoir cap.
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

Powercraft – Pump Seal Kit (Part No.8718)

Pump Seal Kit

from

$55.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Beck/Arnley – Steering Rack Boot (Part No.103-2876)

Steering Rack Boot

from

$26.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1013)

Power Steering Pressure Switch

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – P/S Pressure Switch (Part No.M2097649956DOR)

P/S Pressure Switch

from

$69.63
P/S Pressure Switch

TRW – Stabilizer Link (Part No.L1030142487TRW)

Stabilizer Link

from

$40.34
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Dorman – Help – Power Steering Reservoir Cap (Part No.80983)

Power Steering Reservoir Cap

from

$8.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

Dorman – Dorman Power Steering Pump Pulley (Part No.M2060233508DOR)

Dorman Power Steering Pump Pulley

from

$28.70
An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:
  • High quality plastic and/or steel construction
  • Easy installation
  • Direct replacement for a proper fit every time
  • Quality-tested to ensure trouble-free performance and durability
See More

Powercraft – Rack Pinion Seal Kit (Part No.8984)

Rack Pinion Seal Kit

from

$86.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Driveworks – Ball Joint (Part No.DW-K9643)

Ball Joint

from

$43.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male Inv. Flare x 18mm Male Captive "O" Ring – with Switch Port (Part No.36648)

Power Steering Pressure Hose Assembly, 14mm Male Inv. Flare x 18mm Male Captive "O" Ring - with Switch Port

from

$234.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1797)

Remanufactured Rack and Pinion Assembly

from

$301.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1768)

Remanufactured Rack and Pinion Assembly

from

$267.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Upgrade your 1999 Acura CL with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1999 Acura CL, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Acura or enhancing its overall performance, Steering and Chassis Parts are key to keeping your CL functioning at its best. At Advance Auto Parts, we offer a wide selection of 114 Steering and Chassis Parts for the 1999 Acura CL, designed to meet your needs without breaking the bank. From Ball Joint replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1999 Acura CL at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $1.59 to $499.99, with an average price of $64.25. Our 114 Steering and Chassis Parts in stock come from 27 trusted brands, so you’re sure to find the right part for your 1999 Acura CL without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Acura CL, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Cardone, Driveworks, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Cardone and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $9.29, and at an average 4 stars rating. With 808 customer reviews and counting, our 1999 Acura CL Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Acura CL is always ready to roll. We’re committed to providing you with everything you need to keep your CL in top shape, all in one place. Start shopping confidently below for your 1999 Acura CL!

Best-Selling Ball Joints for 1999 Acura CLs

Enhance the driving experience in your Acura with 26 quality Ball Joint components, starting at $9.29.

MOOG – Ball Joint (Part No.K90336)

Ball Joint

from

$58.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

TRW – Ball Joint (Part No.L2020462432TRW)

Ball Joint

from

$52.75
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
See More

MOOG – Ball Joint (Part No.K9643)

Ball Joint

from

$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-627)

Suspension Control Arm and Ball Joint Assembly

from

$73.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Autocraft’s Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK90446)

Control Arm and Ball Joint Assembly

from

$101.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK90447)

Control Arm and Ball Joint Assembly

from

$125.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-628)

Suspension Control Arm and Ball Joint Assembly

from

$75.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Autocraft’s Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

Driveworks – Ball Joint (Part No.DW-K9643)

Ball Joint

from

$43.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Driveworks – Ball Joint (Part No.DW-K90490)

Ball Joint

from

$9.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Carquest Premium – Ball Joint (Part No.410-70539)

Ball Joint

from

$63.99
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Knurling improves retention between the control arm/knuckle and ball joint housing
See More

Sankei 555 – Ball Joint: Replaces Worn Original Part for Superior Handling and Precision (Part No.L2020462432SNK)

Ball Joint: Replaces Worn Original Part for Superior Handling and Precision

from

$44.17
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Carquest Premium – Control Arm with Ball Joint (Part No.810-70585B)

Control Arm with Ball Joint

from

$95.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:
  • Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
  • Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
  • Pre-installed ball joints and bushings (when applicable) for easy installation
  • Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
  • Hardware included for easier installation
See More

Carquest Premium – Control Arm with Ball Joint (Part No.810-70553B)

Control Arm with Ball Joint

from

$114.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:
  • Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
  • Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
  • Pre-installed ball joints and bushings (when applicable) for easy installation
  • Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
  • Hardware included for easier installation
See More

Dorman – Suspension Control Arm (Part No.520-629)

Suspension Control Arm

from

$65.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.520-630)

Suspension Control Arm

from

$65.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK90446)

Suspension Control Arm and Ball Joint Assembly

from

$82.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
See More

Rare Parts – Ball Joint (Part No.RP71562)

Ball Joint

from

$221.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Beck/Arnley – Control Arm with Ball Joint (Part No.102-4376)

Control Arm with Ball Joint

from

$187.99
Eliminate vibration and unusual tire wear. Corrects camber and caster, improving ride quality. Direct OEM replacement. Complete with ball joint and bushings.
See More

Beck/Arnley – Control Arm with Ball Joint (Part No.102-4371)

Control Arm with Ball Joint

from

$90.99
Eliminate vibration and unusual tire wear. Corrects camber and caster, improving ride quality. Direct OEM replacement. Complete with ball joint and bushings.
See More

Beck/Arnley – Control Arm with Ball Joint (Part No.102-4374)

Control Arm with Ball Joint

from

$90.99
Eliminate vibration and unusual tire wear. Corrects camber and caster, improving ride quality. Direct OEM replacement. Complete with ball joint and bushings.
See More

Beck/Arnley – Control Arm with Ball Joint (Part No.102-4375)

Control Arm with Ball Joint

from

$66.99
Eliminate vibration and unusual tire wear. Corrects camber and caster, improving ride quality. Direct OEM replacement. Complete with ball joint and bushings.
See More

Dorman – Suspension Control Arm (Part No.520-627)

Suspension Control Arm

from

$64.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.520-628)

Suspension Control Arm

from

$54.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

CTR – Ball Joint (Part No.L20203309591CTR)

Ball Joint

from

$39.97
Ball Joint

Rare Parts – Ball Joint (Part No.RP10644)

Ball Joint

from

$30.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

International Suspension Group – Ball Joint (Part No.L2020462432ISG)

Ball Joint

from

$21.51
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Most Popular 1999 Acura CL Sway Bars

Customize your Acura with 9 Sway Bars products like Sway Bar Link Kits, Sway Bar Link Bushing Kits, and Sway Bar Bushings, all priced under $40.99.

MOOG – Stabilizer Bar Link Kit (Part No.K90122)

Stabilizer Bar Link Kit

from

$33.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Incorporates proven design and engineering features
See More

Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K90122)

Suspension Stabilizer Bar Link Kit

from

$27.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
  • Wrench flats at the base of the stud allow for the use of sockets for easy installation
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90193)

Stabilizer Bar Bushing Kit

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Bushings engineered for long life and dependability
  • Replacement can reduce front end noise
  • Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils
See More

Rare Parts – Sway Bar Link (Part No.RP22989)

Sway Bar Link

from

$40.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Bushing (Part No.RP16628)

Sway Bar Bushing

from

$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Beck/Arnley – Stabilizer End Link (Part No.101-5253)

Stabilizer End Link

from

$23.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Beck/Arnley – Stabilizer Bushing Set (Part No.101-6481)

Stabilizer Bushing Set

from

$21.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Bushings are resistant to heat, wear, salt, road grime, and oils
  • Made from a high grade rubber compound
  • Quality construction for durability
  • Application specific for this vehicle
See More

CTR – Sway Bar Link Bushin (Part No.L1031141440CTR)

Sway Bar Link Bushin

from

$3.34
Sway Bar Link Bushin

Tezuka – Sway Bar Link Bushing (Part No.L103155120TZK)

Sway Bar Link Bushing

from

$1.59
The Tezuka Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Top Picks for 1999 Acura CL Power Steering Parts

Upgrade Acura CLs with top-quality Power Steering Parts parts, including 57 OEM and aftermarket selections for your 1999 model.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male Inv. Flare x 18mm Male Captive "O" Ring – with Switch Port (Part No.36648)

Power Steering Pressure Hose Assembly, 14mm Male Inv. Flare x 18mm Male Captive "O" Ring - with Switch Port

from

$234.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Dorman – Dorman Power Steering Pump Pulley (Part No.M2060233508DOR)

Dorman Power Steering Pump Pulley

from

$28.70
An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:
  • High quality plastic and/or steel construction
  • Easy installation
  • Direct replacement for a proper fit every time
  • Quality-tested to ensure trouble-free performance and durability
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1768)

Remanufactured Rack and Pinion Assembly

from

$267.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5907)

Remanufactured Power Steering Pump

from

$166.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest – Power Steering Pressure Switch (Part No.PS207)

Power Steering Pressure Switch

from

$34.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Powercraft – Pump Seal Kit (Part No.8718)

Pump Seal Kit

from

$55.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Dorman – Power Steering Pump Pulley (Part No.300-500)

Power Steering Pump Pulley

from

$28.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Beck/Arnley – Power Steering Hose – Return (Part No.109-8007)

Power Steering Hose - Return

from

$22.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made from a high grade rubber compound
  • No modification needed for installation
  • Quality construction for durability
  • Application specific for this vehicle
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K100180)

Rack & Pinion Bellows Kit

from

$25.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1013)

Power Steering Pressure Switch

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Dorman – Pigtail – Pressure Switch (Part No.645-203)

Pigtail - Pressure Switch

from

$40.99
This power steering pressure switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this power steering pressure switch connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Power Steering Reservoir: Gray And White, Plastic, Original Equipment Replacement (Part No.603-710)

Power Steering Reservoir: Gray And White, Plastic, Original Equipment Replacement

from

$23.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
  • Complete assembly – includes reservoir and reservoir cap.
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

Carquest Premium – 3/8" I.D. Molded Return Hose (Part No.40512)

3/8" I.D. Molded Return Hose

from

$62.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Cardone New – New Power Steering Reservoir (Part No.3R-203)

New Power Steering Reservoir

from

$50.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • Designed to match O.E. fit, function and performance.
  • Manufactured from O.E. grade material for strength and durability.
  • Resistant to cracking caused by the high temperatures in the engine compartment.
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Carquest Premium – Power Steering End Fitting Assembly, 16mm Male Inv. Flare x 3/8" Beaded Tube (Part No.34968)

Power Steering End Fitting Assembly, 16mm Male Inv. Flare x 3/8" Beaded Tube

from

$22.29
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

MTC – P/S Oil Pressure Swi (Part No.M2094849248MTC)

P/S Oil Pressure Swi

from

$1.59
P/S Oil Pressure Swi

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1770)

Remanufactured Rack and Pinion Assembly

from

$499.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – Power Steering Return Tube, 3/8" Beaded Tube x 3/8" Beaded Tube x 2 (Part No.38580)

Power Steering Return Tube, 3/8" Beaded Tube x 3/8" Beaded Tube x 2

from

$46.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
See More

Powercraft – Rack Pinion Seal Kit (Part No.8874)

Rack Pinion Seal Kit

from

$114.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rein – Power Steering Pressure Switch (Part No.ELP0143)

Power Steering Pressure Switch

from

$45.99
Rein OE Quality power steering pressure switches are manufactured to factory specifications using copper electrical circuit components for superior conductivity and low resistive losses. A P/S pressure switch serves two critical functions, the warning of low system oil pressure, and in some applications, the steering demand feedback for the ECU to control the engine speed during low speed steering situations. A sign of a failing or failed power steering oil pressure switch may include a warning light on the dashboard and or engine speed instability during low speed steering. Trust the quality of Rein’s 100% tested OE fit, form and function automotive oil pressure switches

Product Features:
  • Ensures the proper operation of vehicle’s power steering system
  • Designed to meet or exceed factory specifications
  • Manufactured with copper electrical circuit components for superior conductivity
  • Uses vehicle specific connector for quick replacement
See More

Carquest Premium – Pressure Hose Assembly, 14mm Male Inv. Flare x 18mm Male Captive "O" Ring – with Switch Port (Part No.37222)

Pressure Hose Assembly, 14mm Male Inv. Flare x 18mm Male Captive "O" Ring - with Switch Port

from

$424.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Omega – Power Steering Pressure Line Hose Assembly (Part No.M2015146758OME)

Power Steering Pressure Line Hose Assembly

from

$394.15
To ensure the highest level of performance and long service life, Omega power steering hose assemblies are built and tested to the most stringent specifications in the industry, meeting or exceeding all OEM standards.

Product Features:
  • OEM Style replacement assembly is designed to fit your car exactly like the unit you are replacing.
  • All o-rings, sealing washers, adapters and mounting hardware necessary for installation are included.
See More

Maval – Power Steering Pump, Remanufactured (Part No.M2010226335MAV)

Power Steering Pump, Remanufactured

from

$353.12
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • Components are inspected and cleaned of rust and corrosion.
  • Shaft and internal surfaces are inspected, reconditioned and polished.
  • Seals and O-rings are replaced with new, OE-equivalent parts.
  • Assembled units are 100% functionally tested for leaks and performance.
See More

Cardone – Steering Rack (Part No.M1000899149CAR)

Steering Rack

from

$340.41
Steering Rack

Atlantic Automotive Eng – REMAN RACK & PINION (Part No.3321)

REMAN RACK & PINION

from

$269.99
REMAN RACK & PINION

Nichirin – Power Steering Pressure Line Assembly (Part No.M2015149534NIC)

Power Steering Pressure Line Assembly

from

$246.48
Nichirin is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:
  • Excellent pulsation absorption.
  • Advanced tuning design technology to be satisfied with each vehicle’s requirement
  • The choice of many premium cars – silent vehicle interior due to reduced noise transmission
  • High heat resistance
  • High-pressure durability
See More

Carquest Premium – Power Steering Return Tube, 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.40551)

Power Steering Return Tube, 3/8" Beaded Tube x 3/8" Beaded Tube

from

$245.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
See More

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5184N)

NEW P/S PUMP

from

$217.99
NEW P/S PUMP

Rein – Automotive Power Steering Pressure Line Hose Assembly (Part No.M2015126226RIN)

Automotive Power Steering Pressure Line Hose Assembly

from

$185.61
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

Rein – Power Steering High Pressure Feed Assembly (Part No.PSH0319)

Power Steering High Pressure Feed Assembly

from

$109.99
Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose and line assembly
  • SAE J188 compliant high pressure rubber compound hose with internal noise absorber
  • SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
  • Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
  • Pre attached protective jacket(s) and heat sleeve(s), where required
See More

Carquest Premium – 3/8 I.D. Molded Return Hose (Part No.40788)

3/8 I.D. Molded Return Hose

from

$80.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
See More

Carquest Premium – Power Steering Return Tube, 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.38210)

Power Steering Return Tube, 3/8" Beaded Tube x 3/8" Beaded Tube

from

$73.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
See More

Dorman – P/S Pressure Switch (Part No.M2097649956DOR)

P/S Pressure Switch

from

$69.63
P/S Pressure Switch

Rare Parts – Rack & Pinion Bellows (Part No.RP26841)

Rack & Pinion Bellows

from

$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Dorman – Power Steering Reservoir (Part No.M2030291625DOR)

Power Steering Reservoir

from

$54.08
Although no plastic fluid reservoir is completely immune to the conditions that cause cracking, some are less susceptible than others. Dorman uses tough blow-molded plastic for Dorman’s Power Steering Reservoir, steeling it against coolant corrosion, fluid freezing, or exposure to extreme under hood heat.

Product Features:
  • Includes reservoir cap and level sensor (where applicable)
  • Direct replacement for a proper fit every time
  • Weather-resistant
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Atlantic Automotive Eng – NEW P/S PULLEY (Part No.PU100-602)

NEW P/S PULLEY

from

$39.99
NEW P/S PULLEY

Carquest Premium – 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.38331)

3/8" Beaded Tube x 3/8" Beaded Tube

from

$37.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0054)

P/S FLUID RESERVOIR

from

$35.99
P/S FLUID RESERVOIR

In-Demand Tie Rods for 1999 Acura CLs

Select from 11 premium Tie Rods parts for your 1999 Acura CL, with prices ranging from $27.49 to $86.99.

Driveworks – Tie Rod End (Part No.DW-ES3391R)

Tie Rod End

from

$28.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

MOOG – Tie Rod End (Part No.ES3392R)

Tie Rod End

from

$51.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation. 

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

MOOG – Tie Rod End (Part No.EV342)

Tie Rod End

from

$84.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

MOOG – Tie Rod End (Part No.ES3391R)

Tie Rod End

from

$51.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation. 

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Driveworks – Tie Rod End (Part No.DW-ES3392R)

Tie Rod End

from

$28.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Driveworks – Tie Rod End (Part No.DW-EV342)

Tie Rod End

from

$27.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Rare Parts – Tie Rod End (Part No.RP27747)

Tie Rod End

from

$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP27746)

Tie Rod End

from

$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

TRW – TRW Tie Rod (Part No.M3001142258TRW)

TRW Tie Rod

from

$79.84
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010106713SNK)

Sankei 555 Tie Rod End

from

$39.22
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Sankei 555 – Sankei 555 Tie Rod (Part No.M3001142258SNK)

Sankei 555 Tie Rod

from

$34.42
Sankei 555 tie rods meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rods are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
See More

Most Sold 1999 Acura CL Steering Shafts

Explore our best-selling Acura parts for the 1999 CL among 3 OEM and aftermarket options starting from $2.25.

Corteco – P/S Seal (Part No.M2080947942CFW)

P/S Seal

from

$10.70
P/S Seal

Ishino Stone – P/S Seal (Part No.M2080567730ISH)

P/S Seal

from

$4.04
P/S Seal

Ishino Stone – P/S Seal (Part No.M2080567729ISH)

P/S Seal

from

$2.25
P/S Seal

Top-Rated Steering and Chassis Parts Brands For Your 1999 Acura CL

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1999 Acura CLs. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Cardone, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1999 CL start at just $9.29 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 1999 Acura CL Steering and Chassis Parts

When it comes to maintaining or upgrading your 1999 Acura CL, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1999 Acura CL. With over 5 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $20.95. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Power Steering Oil Cooler
from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Popular Cardone 1999 Acura CL Steering and Chassis Parts

Cardone auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1999 Acura CL owner should feel confident when installing genuine Cardone parts in their vehicle. To ensure the best fit and performance for your 1999 CL, Advance Auto Parts carries a full inventory of 9 Cardone Steering and Chassis Parts. Plus you will be keeping your Acura in peak condition while saving money because prices on these Cardone Steering and Chassis Parts range from $31.99 to $499.99, plus, with more than 72 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

New Power Steering Reservoir
from
$50.99
This product is not rated

New Power Steering Reservoir

“”

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

Remanufactured Rack and Pinion Assembly
from
$499.99
This product is not rated

Remanufactured Rack and Pinion Assembly

“”

FAQs for 1999 Acura CL Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1999 Acura CLs?

Out of 114 Steering and Chassis Parts that fit 1999 Acura CLs, the following parts are the top sellers:

What’s the price range for 1999 Acura CL Steering and Chassis Parts?

Steering and Chassis Part prices for the 1999 Acura CL start at $1.59 and go up to $499.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1999 Acura CL?

The average price for Steering and Chassis Parts for the 1999 Acura CL is $64.25. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Acura CL model years?

Yes, we currently carry Steering and Chassis Parts for 4 model years of Acura CLs between 1997 and 2003. Steering and Chassis Parts are bought most frequently for the following model years: 2003, 2002, 1998, and 1997.

What are the cheapest Steering and Chassis Parts for my 1999 Acura CL?

The cheapest 1999 Acura CL Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1999 Acura CL?

Out of 808 reviews by customers, our 1999 Acura CL Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1999 Acura CL and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1999 Acura CL?

Can I get help with 1999 Acura CL Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Acura Steering and Chassis Parts and more.

What is your return policy for Acura CL Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Acura CL Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.