1998 Ford Mustang Performance and Racing Products

Find Your Specific 1998 Ford Mustang Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1998 Mustang. Advance Auto Parts has popular Mustang parts like Performance Steering Products, Performance Oil Filters, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1998 Ford Mustang Performance and Racing Products below and start saving instantly.

Popular 1998 Ford Mustang Performance and Racing Products Categories

Performance Oil Filters
Performance Oil Filters
Computer Chip Programmers
Computer Chip Programmers
Performance Air Filters
Performance Air Filters
Performance Coils
Performance Coils
Performance Air Intake Kits
Performance Air Intake Kits
Performance Exhaust Mufflers
Performance Exhaust Mufflers
Engine Cold Air Intakes
Engine Cold Air Intakes
Performance Shifters
Performance Shifters
Performance Exhaust System Kits
Performance Exhaust System Kits
Performance Coil Spring Insulators
Performance Coil Spring Insulators
Performance Spark Plug Wires
Performance Spark Plug Wires
Performance Chassis Bushing Kits
Performance Chassis Bushing Kits

Essential Performance and Racing Products for 1998 Ford Mustangs

Energy Suspension – Hyper-Flex System (Part No.4.18112G)

Hyper-Flex System

from

$372.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More
View Product

K&N – Cold Air Intake: Adds Up To 30 Horsepower, With Million Mile Air Filter (Part No.57-2545)

Cold Air Intake: Adds Up To 30 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

(1 reviews)
View Product

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More
View Product

MSD Ignition – Wire Set; Black Super Conductor; Ford 351C-460 with HEI Cap (Part No.35383)

Wire Set; Black Super Conductor; Ford 351C-460 with HEI Cap

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
See More
View Product

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1570)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$89.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

(4 reviews)
View Product

MSD Ignition – Ignition Coil (Part No.8227)

Ignition Coil

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for Ford TFI coil
  • 85:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

(3 reviews)
View Product

Proform – Ford Mustang Suspension Control Arm Kit, Black Finish; For 1978-1998 Ford Mustangs (Part No.68070)

Ford Mustang Suspension Control Arm Kit, Black Finish; For 1978-1998 Ford Mustangs

from

$402.99
Kit includes upper and lower rear control arms. Strengthen your Mustang suspension by replacing your flimsy control arms with our strong .120″ wall control arms.

Product Features:
  • Eliminates Wheel Hop & Improves Handling
  • Boxed Type Upper & Lower Control Arms Solid Steel Construction (Not Hollowed)
  • Polyurethane Bushings Included
  • Made From High Quality .120 Wall Steel Material w/ Black Powedercoat Finish
  • Fits COBRA, SVT COBRA, SVT COBRA R, GHIA, GL, GLX, GT, GTS, GT-350 20TH Anniversary, Turbo GT, L, LX, and SVO (’79-1998)
See More
View Product

Powertrax – Lock Right Locker (Part No.1820-LR)

Lock Right Locker

from

$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
    • See More
    View Product

    K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.57-2566)

    Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter

    from

    $349.99
    K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

    Product Features:
    • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
    • IMPROVED ENGINE SOUND: Hear the power under the hood.
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
    • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
    • HIGH QUALITY: Made in America.
    See More

    (6 reviews)
    View Product

    B & M – Automatic Shifter, Hammer Fits 87-93 Mustang Console (Part No.81002)

    Automatic Shifter, Hammer Fits 87-93 Mustang Console

    from

    $304.99
    The Hammer console shifter is a direct-fit for all 1987-93 Mustangs. This just may be the most comfortable and versatile shifter available for your Pony. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is spoon-shaped for easy operation in a multitude of grip positions and controls the reverse lockout feature, meeting NHRA/IHRA safety rules. It features a smooth positive ratchet action, which only allows you to shift one gear at a time, so you’ll never have to worry about missing a gear from over-shifting. Other safety features include a backup light switch, neutral safety switch and illuminated gear position indicator. The result is a shifter that is perfect for all new generation vehicles and street rods where style is not just form, but function. Shifter includes all necessary hardware, console plate, boot, shift handle and detailed instructions for an easy at home installation. Note: Fits C4 and AOD transmissions in 1987-93 Mustang consoles. Shifter re-uses the factory shift cable. Use with a C4 transmission requires optional installation kit #81020

    Product Features:
    • Full Ratchet Action Mechanism
    • Positive Upshifts/Downshifts
    • Comfortably Fits Hands
    • Factory Cables Utilized
    • Cables Retain Factory Interlock
    See More

    (1 reviews)
    View Product

    Energy Suspension – Control Arm Bushing Set (Part No.4.3115R)

    Control Arm Bushing Set

    from

    $144.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More
    View Product

    Lakewood – Clutch Fork Ball-Adj: Mustang (Part No.15503)

    Clutch Fork Ball-Adj: Mustang

    from

    $48.49
    Designed to allow additional adjustment of the clutch fork height to eliminate clutch release problems when installing a high performance clutch. Recommended for use with Lakewood safety bell housings. Available for most GM, Ford, and Mopar applications. Adjustable dowel pins correct for improper register bore alignment of bell housing.

    Product Features:
    • Allows Additional Adjustment
    • Eliminates Clutch Release Problems
    See More
    View Product

    Energy Suspension – Coil Spring Isolator Set (Part No.4.6102R)

    Coil Spring Isolator Set

    from

    $48.99
    Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Lasts from 3 to 10 Times Longer
    • Assemble to Chassis Same Way as OEM
    • Maintains Factory Ride Characteristics
    • Simple Way to Increase Vehicle Height
    See More
    View Product

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp) (Part No.70003)

    Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp)

    from

    $1113.99


    Product Features:
    • Designed To Add Power In Stages
    • Softens The Hit Of The Nitrous System
    • Control Excessive Tire Spin
    • Control Violent Chassis Reaction
    • Allows You To Adjust The 1st Stage
    See More
    View Product

    Energy Suspension – Strut Tower Bushing Set (Part No.4.7114G)

    Strut Tower Bushing Set

    from

    $32.99
    Product Features:
    • Made from HYPER-Flex Polyurethane
    See More
    View Product

    Dynomax – 55517 Exhaust Intermediate Pipe (Part No.55517)

    55517 Exhaust Intermediate Pipe

    from

    $64.99
    Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
    • PREMIUM MATERIALS – Made from stainless steel for durability and long life
    • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    See More
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042443)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $123.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Hays – Flywheels (Part No.12-030)

    Flywheels

    from

    $137.99
    Flywheels
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5162G)

    Sway Bar Bushing Set

    from

    $31.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Lakewood – High Performance U-Joint (Part No.23016)

    High Performance U-Joint

    from

    $79.99
    Lakewood universal replacement U-joints are fatigue- and wear-resistant, the ultimate in strength. Designed with ultra-durable chrome-nickel-moly alloy cross and caps, and special high-carbon steel and induction heat-treated needle bearings.

    Product Features:
    • Chrome-Nickel-Moly Alloy Cross
    • Improved Fatigue Resistance
    • High-Carbon Steel Bearings
    • Maximize Wear Resistance
    • Solid Forged Cross Body
    • High Strength
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5158R)

    Sway Bar Bushing Set

    from

    $22.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Control Arm Bushing Set (Part No.4.3106G)

    Control Arm Bushing Set

    from

    $16.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More
    View Product

    SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

    Preloaded Performance Programmer for Increased Horsepower & Torque

    from

    $399.99
    The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

    Product Features:
    • Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
    • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
    • Reads and clears DTC (Diagnostic Trouble Codes) with ease.
    • Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
    • Full color LCD display
    • High-speed data logging/monitoring
    • Dual analog inputs
    • Most popular vehicles supported
    • Installs quickly and easily
    • Easy restoration back to stock
    • User adjustable vehicle parameters
    • USB Interface cable included
    • Product might not be available in all states due to local laws.
    See More

    (1 reviews)
    View Product

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13104R)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More
    View Product

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    (99 reviews)
    View Product

    Lakewood – Custom Clutch Fork-Mustang (Part No.15525)

    Custom Clutch Fork-Mustang

    from

    $176.99
    Heavy-gauge, stamped steel offers more strength than the original factory unit, and a durable zinc dichromate finish resists rust.

    Product Features:
    • Constructed Of Heavy Gauge Steel
    • Helps To Prevent Flex
    • Offers More Strength
    • Durable Zinc Dichromate Finish
    • Finish Resists Rust And Corrosion
    See More
    View Product

    MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15816)

    Street Series Crossmember-Back Performance Exhaust System

    from

    $926.99
    The MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System 15816 brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L 1967-1970 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15816 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

    Product Features:
    • Dyno-proven performance
    • Durable corrosion-resistant stainless steel construction
    • CNC precision robotic manufacturing techniques
    See More
    View Product

    Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (100-400+ Hp) (Part No.70082)

    Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (100-400+ Hp)

    from

    $1114.99


    Product Features:
    • Designed For Carbureted V8 Engines
    • Enhanced Flow Capacity
    • Add Power In Stages
    • Softens The Hit Of The Nitrous System
    See More
    View Product

    Upgrade your 1998 Ford Mustang with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1998 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Performance and Racing Products for the 1998 Ford Mustang, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 Ford Mustang at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $991.99, with an average price of $225.23. Our 76 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 1998 Ford Mustang without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names like SCT Performance, K&N, B & M, and more. SCT Performance Performance and Racing Products start at just $399.99 and boast an impressive 5.0 stars average rating from customers. K&N and B & M also bring quality to the table, with Performance and Racing Products available starting at $17.99, and at an average 4.8 stars rating. With 540 customer reviews and counting, our 1998 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1998 Ford Mustang!

    Best-Selling Performance Steering Products for 1998 Ford Mustangs

    Enhance the driving experience in your Ford with 14 quality Performance Steering Product components, starting at $5.99.
    show more show less

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    (1 reviews)
    View Product

    Energy Suspension – Sway Bar End Link Kit (Part No.9.8124R)

    Sway Bar End Link Kit

    from

    $26.99
    Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

    Product Features:
    • Made from HYPER-Flex Polyurethane
    • Allows Vehicle to Work At Maximum Efficiency
    • Easy to Install
    • Superior Performance and Greater Longevity
    • Lasts Much Longer Than OEM Rubber End Links
    See More
    View Product

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More
    View Product

    Energy Suspension – Sway Bar End Link Kit (Part No.9.8124G)

    Sway Bar End Link Kit

    from

    $25.99
    Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

    Product Features:
    • Made from HYPER-Flex Polyurethane
    • Allows Vehicle to Work At Maximum Efficiency
    • Easy to Install
    • Superior Performance and Greater Longevity
    • Lasts Much Longer Than OEM Rubber End Links
    See More
    View Product

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5108R)

    Sway Bar Bushing Set

    from

    $21.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5166R)

    Sway Bar Bushing Set

    from

    $30.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5136R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5110G)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5108G)

    Sway Bar Bushing Set

    from

    $21.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5136G)

    Sway Bar Bushing Set

    from

    $19.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5110R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5112G)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5112R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Most Popular 1998 Ford Mustang Performance Oil Filters

    Customize your Ford with 2 Performance Oil Filters products like Performance Oil Filters, all priced under $17.99.
    show more show less

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    (99 reviews)
    View Product

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2009)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    (42 reviews)
    View Product

    Top Picks for 1998 Ford Mustang Performance Exhaust Products

    Upgrade Ford Mustangs with top-quality Performance Exhaust Products parts, including 5 OEM and aftermarket selections for your 1998 model.
    show more show less

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $154.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042443)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $123.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Hooker Headers – Aero Chamber Muffler (Part No.21504HKR)

    Aero Chamber Muffler

    from

    $133.99
    The polished stainless steel Aero Chamber is designed to do much more than simply muffle exhaust noise. The Aero Chamber Muffler produces a deep throaty powerful sound that will not change with time. The Hooker Aero Chamber uses a unique step principal, similar to that which is currently popular in racing header design. The aerodynamically designed chambers flow 23 percent better and produce more horsepower and torque than the most popular high performance brand. The stainless steel construction assures good looks, corrosion protection ang long life.

    Product Features:
    • All Aluminized/Stainless Steel
    • Deep Throaty Powerful Sound
    • 23 percent More Flow Than Others
    • More Horsepower And Torque
    • Sound Absorption Chamber
    • Stepped Acceleration Chamber
    See More
    View Product

    Flowmaster Inc. – Cat-back System 409S – Dual Dump Exit – American Thunder – Aggressive Sound (Part No.817574)

    Cat-back System 409S - Dual Dump Exit - American Thunder - Aggressive Sound

    from

    $499.99
    Flowmaster’s race-oriented American Thunder Cat-back system is designed to mount behind the factory catalytic converters, or most OEM style aftermarket H-pipes. These systems are mandrel bent for maximum performance and include Super 44 series mufflers. This American Thunder system delivers a super aggressive interior and exterior tone and is suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response and power. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

    Product Features:
    • Fits with most modified suspensions
    • Stainless steel construction
    • Patented Delta Flow technology
    • Lifetime limited warranty
    • Made in the USA
    See More
    View Product

    Flowtech – Standard Header X-Pipe (Part No.12114YFLT)

    Standard Header X-Pipe

    from

    $227.99
    Standard Header X-Pipe
    View Product

    In-Demand Performance Air Filters for 1998 Ford Mustangs

    Select from 1 premium Performance Air Filters parts for your 1998 Ford Mustang.
    show more show less

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-0945)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $89.99
    K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
    • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
    • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
    See More

    (88 reviews)
    View Product

    Most Sold 1998 Ford Mustang Performance Ignition Products

    Explore our best-selling Ford parts for the 1998 Mustang among 6 OEM and aftermarket options starting from $24.99.
    show more show less

    MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)

    Coil; Ford DIS Coil Pack; 4 Tower; Stock

    from

    $117.99
    Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.

    Product Features:
    • Designed to use w/late model Ford waste spark ignition systems
    • 83:1 turns ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Secondary towers designed for snap on spark plug terminals
    • Primary terminals require Ford style connector
    See More

    (1 reviews)
    View Product

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    (3 reviews)
    View Product

    Accel – High-Performance Ignition Coils for Ford 2-Valve Engines (Part No.140032)

    High-Performance Ignition Coils for Ford 2-Valve Engines

    from

    $24.99
    ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct improved performance replacements for OEM coils.

    Product Features:
    • Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
    • Advanced Bobbin Technology
    • Direct Plug In Replacement results in a Direct OE Fit
    • OBD ll Safe, so you won’t be throwing codes, just sparks
    • Standard Motor Products SMP Fd-503
    • MSD 8242 82428
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    (82 reviews)
    View Product

    MSD Ignition – Wire Set; Super Conductor; Ford Mustang 3.8L; V6; 94-98 (Part No.32289)

    Wire Set; Super Conductor; Ford Mustang 3.8L; V6; 94-98

    from

    $158.99
    The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

    Product Features:
    • Bolt-on Performance
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Conductor core features DuPont Kevlar material for increased tensile strength
    • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
    • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
    See More

    (1 reviews)
    View Product

    Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

    Ford 4-Twr.Dis Supercoil Pack

    from

    $116.99
    Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Fd-487
    • MSD 8241
    See More

    (3 reviews)
    View Product

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More
    View Product

    Top-Rated Performance and Racing Products Brands For Your 1998 Ford Mustang

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, K&N, and B & M, and more. Performance and Racing Products from these brands that fit a 1998 Mustang start at just $17.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular SCT Performance 1998 Ford Mustang Performance and Racing Products

    When it comes to maintaining or upgrading your 1998 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 1998 Ford Mustang. With over 2 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99, with an average price of just $499.99. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
    Preloaded Performance Programmer for Increased Horsepower & Torque
    from $399.99
    (1)
    Preloaded Performance Programmer for Increased Horsepower & Torque
    “I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”
    Livewire TS Plus Performance Programmer and Monitor
    from $599.99
    (1)
    Livewire TS Plus Performance Programmer and Monitor
    “I bought it for my f350 2008 6.4 and it worked perfectly”

    Popular K&N 1998 Ford Mustang Performance and Racing Products

    K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 Ford Mustang owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1998 Mustang, Advance Auto Parts carries a full inventory of 3 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range from $17.99 to $89.99, plus, with more than 229 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
    from $17.99
    (99)
    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
    “Great product. Great service.”
    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
    from $17.99
    (42)
    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
    “Best filter on the market.”
    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
    from $89.99
    (88)
    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
    “Great product. Airflow and acceleration is a lot better than stock filter. Easy to install as well.”

    FAQs for 1998 Ford Mustang Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1998 Ford Mustangs?

    Out of 76 Performance and Racing Products that fit 1998 Ford Mustangs, the following parts are the top sellers:

    What’s the price range for 1998 Ford Mustang Performance and Racing Products?

    Performance and Racing Product prices for the 1998 Ford Mustang start at $5.99 and go up to $991.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1998 Ford Mustang?

    The average price for Performance and Racing Products for the 1998 Ford Mustang is $225.23. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?

    Yes, we currently carry Performance and Racing Products for 55 model years of Ford Mustangs between 1964 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

    What are the cheapest Performance and Racing Products for my 1998 Ford Mustang?

    The cheapest 1998 Ford Mustang Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1998 Ford Mustang?

    Out of 540 reviews by customers, our 1998 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 Ford Mustang and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1998 Ford Mustang?

    Can I get help with 1998 Ford Mustang Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

    What is your return policy for Ford Mustang Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

    More Popular Parts for All Makes