1998 Ford Mustang Performance and Racing Products

Find Your Specific 1998 Ford Mustang Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1998 Mustang. Advance Auto Parts has popular Mustang parts like Performance Steering Products, Performance Exhaust Products, Performance Air Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1998 Ford Mustang Performance and Racing Products below and start saving instantly.

Popular 1998 Ford Mustang Performance and Racing Products Categories

Computer Chip Programmers
Computer Chip Programmers
Performance Air Filters
Performance Air Filters
Performance Coils
Performance Coils
Performance Air Intake Kits
Performance Air Intake Kits
Performance Exhaust Mufflers
Performance Exhaust Mufflers
Performance Shifters
Performance Shifters
Performance Exhaust System Kits
Performance Exhaust System Kits
Performance Engine and Transmission Mounts
Performance Engine and Transmission Mounts
Performance Drive Shafts
Performance Drive Shafts
Performance Front Shock and Struts
Performance Front Shock and Struts
Performance Coil Spring Insulators
Performance Coil Spring Insulators
Performance Chassis Bushing Kits
Performance Chassis Bushing Kits
Performance Flywheel and Flexplates
Performance Flywheel and Flexplates
Performance Control Arms
Performance Control Arms
Performance Exhaust Manifold Gaskets
Performance Exhaust Manifold Gaskets
Performance Posi Units and Components
Performance Posi Units and Components
Performance Ignition Kits
Performance Ignition Kits
Performance Upper Performance Control Arm Bushings
Performance Upper Performance Control Arm Bushings
Performance Chassis Bump Stops
Performance Chassis Bump Stops
Performance Universal Joints
Performance Universal Joints
Performance Ring and Pinions
Performance Ring and Pinions
Performance Ignition Parts
Performance Ignition Parts
Performance Sway Bar Link Kits
Performance Sway Bar Link Kits
Performance Lower Control Arm Bushings
Performance Lower Control Arm Bushings
Performance Sway Bar Bushings
Performance Sway Bar Bushings
Performance Tie Rod End Boots
Performance Tie Rod End Boots
Performance Transmission Shift Kits
Performance Transmission Shift Kits
Performance Nitrous Systems
Performance Nitrous Systems
Nitrous Oxide Injection System Kit
Nitrous Oxide Injection System Kit
Manual Transmission Main Shaft Race
Manual Transmission Main Shaft Race

Essential Performance and Racing Products for 1998 Ford Mustangs

Lakewood – Drive Shaft Loop-Mustang (Part No.18017)

Drive Shaft Loop-Mustang

from

$72.99
Features Zinc plated construction for durability. Includes all hardware and instructions.

Product Features:
  • Easy Bolt-On Installation
  • Without Modifications
  • NHRA/IHRA Legal
  • Thick Zinc-Plated Steel
  • Compete W/Mounting Hardware
  • Includes Instructions
See More
View Product

Energy Suspension – Motor and Transmission Mount (Part No.4.1124R)

Motor and Transmission Mount

from

$295.99
Product Features:
  • Re-Engineered to Handle High Horsepower
  • Outlasts Rubber
  • Virtually Indestructible
See More
View Product

Flowmaster Inc. – 40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942042)

40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

(1 reviews)
View Product

Energy Suspension – Sway Bar Bushing Set (Part No.4.5191G)

Sway Bar Bushing Set

from

$41.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More
View Product

Energy Suspension – Control Arm Bushing Set (Part No.4.3155R)

Control Arm Bushing Set

from

$159.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More
View Product

Energy Suspension – Sway Bar Bushing Set (Part No.4.5161G)

Sway Bar Bushing Set

from

$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More
View Product

Edelbrock – Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp) (Part No.70003)

Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp)

from

$1113.99


Product Features:
  • Designed To Add Power In Stages
  • Softens The Hit Of The Nitrous System
  • Control Excessive Tire Spin
  • Control Violent Chassis Reaction
  • Allows You To Adjust The 1st Stage
See More
View Product

Hays – Flywheels (Part No.12-535)

Flywheels

from

$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More
View Product

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More
View Product

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
    • See More
    View Product

    Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

    Ford 4-Twr.Dis Supercoil Pack

    from

    $116.99
    Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Fd-487
    • MSD 8241
    See More

    (3 reviews)
    View Product

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1570)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $89.99
    K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
    • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
    • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
    • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
    See More

    (4 reviews)
    View Product

    Energy Suspension – Coil Spring Isolator Set (Part No.4.6102R)

    Coil Spring Isolator Set

    from

    $48.99
    Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Lasts from 3 to 10 Times Longer
    • Assemble to Chassis Same Way as OEM
    • Maintains Factory Ride Characteristics
    • Simple Way to Increase Vehicle Height
    See More
    View Product

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

    Exhaust Manifold Gasket Set

    from

    $45.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More
    View Product

    Energy Suspension – Control Arm Bump Stop Set (Part No.4.6103R)

    Control Arm Bump Stop Set

    from

    $14.99
    Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Helps Prevent Damage to Control Arm
    See More
    View Product

    Lakewood – High Performance U-Joint (Part No.23016)

    High Performance U-Joint

    from

    $79.99
    Lakewood universal replacement U-joints are fatigue- and wear-resistant, the ultimate in strength. Designed with ultra-durable chrome-nickel-moly alloy cross and caps, and special high-carbon steel and induction heat-treated needle bearings.

    Product Features:
    • Chrome-Nickel-Moly Alloy Cross
    • Improved Fatigue Resistance
    • High-Carbon Steel Bearings
    • Maximize Wear Resistance
    • Solid Forged Cross Body
    • High Strength
    See More
    View Product

    Accel – Module:Eliminator Replacement (Part No.2005)

    Module:Eliminator Replacement

    from

    $91.99
    Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

    Product Features:
    • Most Accurate Ignition Timing System
    • Improves Performance And Fuel Economy
    • Easy To Install With Simple Hand Tools
    • Reduced Maintenance
    • Eliminates Changing Points
    See More
    View Product

    Richmond Gear – RngPnn (Part No.69-0312-1)

    RngPnn

    from

    $350.99
    RngPnn
    View Product

    Hurst – Manual Shifter, Indy, SSA 3 Speed Shifter (Part No.5010002)

    Manual Shifter, Indy, SSA 3 Speed Shifter

    from

    $369.99
    Hurst Indy SSA 3-speed shifter kits are designed to be used on most popular 3-speed transmissions in a wide variety of cars. Applications are determined by transmissions and an exclusive engineered mounting design, for most applications.

    Product Features:
    • Spring Loaded Gate
    • Short Precise Throws
    • Chrome Plated Stick
    • All Components Are Plated
    • Complete with Shifter Boot and Hardware
    See More
    View Product

    B & M – Shift Improver Kit (Part No.40266)

    Shift Improver Kit

    from

    $175.99
    Shift Improver Kit – 1996 to 1999 Ford, Lincoln, Mercury 4R70W Application: 1996 to 1999 Ford, Lincoln, Mercury 4R70W Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage Application: 1996 to 1999 Ford, Lincoln, Mercury 4R70W The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible shift.

    Product Features:
    • Provides Crisp Shifts
    • On Any Stock Automatic Transmission
    • Eliminates Soft/Sluggish Shift
    • Eliminates Shift Overlap
    • Eliminate Clutch and Band Wear
    • Improves Transmission Life
    • Transmission Removal Not Required
    See More
    View Product

    Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9929)

    Cold Air Intake Kit Engineered to Add Horsepower & Torque

    from

    $199.99
    Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

    Product Features:
    • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
    • IMPROVED ENGINE SOUND: Hear the power under the hood
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
    • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
    • WILL NOT VOID VEHICLE WARRANTY
    • Product might not be available in all states due to local laws.
    See More

    (1 reviews)
    View Product

    Energy Suspension – Control Arm Bushing Set (Part No.4.3155G)

    Control Arm Bushing Set

    from

    $165.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More
    View Product

    FAG US – CUP (Part No.LM48510)

    CUP

    from

    $7.69
    CUP
    View Product

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13104R)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More
    View Product

    Energy Suspension – Hyper-Flex System (Part No.4.18111R)

    Hyper-Flex System

    from

    $152.99
    Product Features:
    • Incredible Improvement in Control
    • Maintains Proper Caster and Camber Alignment
    • Increase in Handling and Control
    • Greatly Reduce Wheel Hop on Quick Acceleration
    • Even Braking Control is Improved
    • Better Suspension Stability
    See More
    View Product

    Lakewood – 90/10 Drag Strut 94Up Mustang (Part No.40516)

    90/10 Drag Strut 94Up Mustang

    from

    $224.99
    Features precision speed sensing valving. Easier to control at the end of the track.

    Product Features:
    • For Maximum Traction At The Rear Wheels
    • Designed To Respond Similar To The Shocks
    See More
    View Product

    Proform – Ford Mustang Suspension Control Arm Kit, Black Finish; For 1978-1998 Ford Mustangs (Part No.68070)

    Ford Mustang Suspension Control Arm Kit, Black Finish; For 1978-1998 Ford Mustangs

    from

    $402.99
    Kit includes upper and lower rear control arms. Strengthen your Mustang suspension by replacing your flimsy control arms with our strong .120″ wall control arms.

    Product Features:
    • Eliminates Wheel Hop & Improves Handling
    • Boxed Type Upper & Lower Control Arms Solid Steel Construction (Not Hollowed)
    • Polyurethane Bushings Included
    • Made From High Quality .120 Wall Steel Material w/ Black Powedercoat Finish
    • Fits COBRA, SVT COBRA, SVT COBRA R, GHIA, GL, GLX, GT, GTS, GT-350 20TH Anniversary, Turbo GT, L, LX, and SVO (’79-1998)
    See More
    View Product

    Dynomax – Dual – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Mufflers: Stainless Steel (Part No.39434)

    Dual - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Mufflers: Stainless Steel

    from

    $877.99
    Give your Ford Mustang’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. dual cat-back exhaust system. Features two DynoMax Ultra Flo welded mufflers that feature Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • COMPATIBILITY — Designed for 2005-2009 Ford Mustang; see product information for compatibility and engine specs
    • COMPLETE SOLUTION — Includes two DynoMax Ultra Flo welded mufflers, pipes, X-pipe, brackets and clamps
    • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
    • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
    • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure
    • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
    • ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
    • NOTES — Welded 3.5-in. outlet double wall, buffed and polished stainless-steel slant cut tips
    See More

    (1 reviews)
    View Product

    Upgrade your 1998 Ford Mustang with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1998 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 71 Performance and Racing Products for the 1998 Ford Mustang, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 Ford Mustang at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $991.99, with an average price of $208.70. Our 71 Performance and Racing Products in stock come from 21 trusted brands, so you’re sure to find the right part for your 1998 Ford Mustang without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, Spectre, Flowmaster Inc., and more. Energy Suspension Performance and Racing Products start at just $9.99 and boast an impressive 4 stars average rating from customers. Spectre and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $49.99, and at an average 4 stars rating. With 56 customer reviews and counting, our 1998 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1998 Ford Mustang!

    Best-Selling Performance Steering Products for 1998 Ford Mustangs

    Enhance the driving experience in your Ford with 14 quality Performance Steering Product components, starting at $9.99.
    show more show less

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    (3 reviews)
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5167R)

    Sway Bar Bushing Set

    from

    $30.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5174R)

    Sway Bar Bushing Set

    from

    $30.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5166G)

    Sway Bar Bushing Set

    from

    $30.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5135R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5136R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5108G)

    Sway Bar Bushing Set

    from

    $21.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5101R)

    Sway Bar Bushing Set

    from

    $19.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5136G)

    Sway Bar Bushing Set

    from

    $19.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5111R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5111G)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5113R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5112G)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5109R)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Most Popular 1998 Ford Mustang Performance Exhaust Products

    Customize your Ford with 8 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust Manifold Gaskets, and Performance Exhaust System Kits, all priced under $863.99.
    show more show less

    Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

    Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $113.99
    Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $99.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (3 reviews)
    View Product

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $139.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $175.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17222)

    Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval

    from

    $91.99
    DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
    See More
    View Product

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7556)

    Ultra Seal: Exhaust Gasket Set

    from

    $40.99
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-temperature steel core/graphite faced exhaust material
    • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
    • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
    • Conforms to and seals minor surface irregularities
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Anti-Stick Properties
    • Easy Removal For Disassembly
    See More
    View Product

    MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15638)

    Street Series Cat-Back Performance Exhaust System

    from

    $863.99
    The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

    Product Features:
    • Dyno-proven performance
    • Durable corrosion-resistant stainless steel construction
    • CNC precision robotic manufacturing techniques
    See More
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)

    40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More
    View Product

    Top Picks for 1998 Ford Mustang Performance Air Filters

    Upgrade Ford Mustangs with top-quality Performance Air Filters parts, including 1 OEM and aftermarket selections for your 1998 model.
    show more show less

    Spectre – Spectre Replacement Air Filter (Part No.HPR8039)

    Spectre Replacement Air Filter

    from

    $49.99
    This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.

    Product Features:
    • HPR OE Replacement Air Filter
    • High flow replacement filter designed to fit perfectly in your stock air box
    • Engineered for increased flow and greater performance
    • Fits multiple Ford applications
    • Factory pre-oiled and ready to use
    • Easy to install with no special tools or skills required
    See More

    (10 reviews)
    View Product

    In-Demand Performance Air Intake Kits for 1998 Ford Mustangs

    Select from 1 premium Performance Air Intake Kits parts for your 1998 Ford Mustang.
    show more show less

    K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-2523-2)

    Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

    from

    $349.99
    K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

    Product Features:
    • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
    • IMPROVED ENGINE SOUND: Hear the power under the hood.
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
    • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
    • HIGH QUALITY: Made in America.
    See More

    (1 reviews)
    View Product

    Most Sold 1998 Ford Mustang Performance Ignition Products

    Explore our best-selling Ford parts for the 1998 Mustang among 5 OEM and aftermarket options starting from $85.29.
    show more show less

    MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)

    Coil; Ford DIS Coil Pack; 4 Tower; Stock

    from

    $117.99
    Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.

    Product Features:
    • Designed to use w/late model Ford waste spark ignition systems
    • 83:1 turns ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Secondary towers designed for snap on spark plug terminals
    • Primary terminals require Ford style connector
    See More

    (1 reviews)
    View Product

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    (3 reviews)
    View Product

    Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

    Ford 4-Twr.Dis Supercoil Pack

    from

    $116.99
    Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Fd-487
    • MSD 8241
    See More

    (3 reviews)
    View Product

    MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

    Harness; Ford 4.6L Modular to DIS-4 Ignition

    from

    $176.99
    Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

    Product Features:
    • Easily install two DIS-4 Ignitions on late model Ford Engines
    • Easy Connections w/No Splicing Or Cutting Into Factory Wiring
    • Wiring the system will take only an hour
    • Multiple direct plug in connectors
    • Wiring the system will only take and hour
    See More
    View Product

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More
    View Product

    Top-Rated Performance and Racing Products Brands For Your 1998 Ford Mustang

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, Spectre, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 1998 Mustang start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Energy Suspension 1998 Ford Mustang Performance and Racing Products

    When it comes to maintaining or upgrading your 1998 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1998 Ford Mustang. With over 24 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $70.66. Plus, with over 3 customer reviews and an average rating of 4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Coil Spring Isolator Set
    from
    $30.99
    This product is not rated

    Coil Spring Isolator Set

    “”

    Coil Spring Isolator Set
    from
    $48.99
    This product is not rated

    Coil Spring Isolator Set

    “”

    Coil Spring Isolator Set
    from
    $34.99
    This product is not rated

    Coil Spring Isolator Set

    “”

    Popular Spectre 1998 Ford Mustang Performance and Racing Products

    Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 Ford Mustang owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 1998 Mustang, Advance Auto Parts carries a full inventory of 1 Spectre Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Spectre Performance and Racing Products range up to $49.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Spectre Replacement Air Filter
    from
    $49.99

    (10)

    Spectre Replacement Air Filter

    “Good as k&n for way less $”

    FAQs for 1998 Ford Mustang Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1998 Ford Mustangs?

    Out of 71 Performance and Racing Products that fit 1998 Ford Mustangs, the following parts are the top sellers:

    What’s the price range for 1998 Ford Mustang Performance and Racing Products?

    Performance and Racing Product prices for the 1998 Ford Mustang start at $7.69 and go up to $991.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1998 Ford Mustang?

    The average price for Performance and Racing Products for the 1998 Ford Mustang is $208.70. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?

    Yes, we currently carry Performance and Racing Products for 56 model years of Ford Mustangs between 1964 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

    What are the cheapest Performance and Racing Products for my 1998 Ford Mustang?

    The cheapest 1998 Ford Mustang Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1998 Ford Mustang?

    Out of 56 reviews by customers, our 1998 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 Ford Mustang and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1998 Ford Mustang?

    Can I get help with 1998 Ford Mustang Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

    What is your return policy for Ford Mustang Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

    More Popular Parts for All Makes