1998 Chevrolet Express 1500 Cooling and Climate Controls

Name: A/C TXV O-Ring Expansion Valve
Brand: Carquest Premium
SKU: T38654
Price: 28.99 USD

Below you will find various in-demand Chevrolet Cooling and Climate Controls, components and accessories for your 1998 Express 1500. Advance Auto Parts has popular Express 1500 parts like Air Conditioning Parts, Blend Doors, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Express 1500 model years including 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and more. Select a category of 1998 Chevrolet Express 1500 Cooling and Climate Controls below and start saving instantly.

Popular 1998 Chevrolet Express 1500 Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Radiator Fan Clutch

AC Replacement Kits

Radiator Caps

AC Compressor Without Clutch

Thermostats

ABS Control Relays

Climate Control Modules

Heater Blend Door Control Motors

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

AC Refrigerant Hose Fitting

Air Blend Door Actuators

AC Clutch

Coolant Temperature Sensors

Heater Cores

Blower Motor Control Units

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Engine Water Pump Gasket Kits

AC Harness Connectors

Air Conditioning Relays

AC Condensers

AC Compressor Bypass Pulleys

AC Compressor Cut-Out Relays

OE Cooling Fan Blades

Water Pump Install. Kits

HVAC Automatic Temperature Control (ATC) Relays

AC Evaporators

AC Caps and Valve Core Kits

AC Liquid Lines

Thermostat Housings

HVAC Blower Motor Control Unit Connectors

Heater Valves

AC Clutch Coil Connectors

Accumulator and Receiver Driers

HVAC Heater Water Flow Control Valves

AC Clutch Bearings

ABS Speed Sensors

AC Suction Lines

Temperature Switch and Senders

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Control Valves

Radiator Drain Plugs

AC Compressor Cut-Off Switches

Engine Water Pump Backing Plate Gaskets

Coolant Fan Motor Connectors

AC Switch Connectors

AC Condenser Screw

AC Compressor Pressure Switches

Coolant Temp Sending Unit Switch Connectors

AC Service Valve Caps

AC Condenser Fan Switch Harness Connectors

AC Block Off Kits

Blower Switches

Radiator Cap Adapters

AC Compressor Thrust Bearings

Engine Water Pump with Fan Clutch

HVAC Heater Control Switch Connector

Thermostat Shims

HVAC Evap, Heater, and Blower Module Connector

AC Low Pressure Side Switches

AC Evaporator Tube O-Ring

AC Hose Bolt

AC Compressor Water Valve Solenoid Connectors

Essential Cooling and Climate Controls for 1998 Chevrolet Express 1500s

from

$28.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$79.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$37.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$58.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$8.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$294.99

Climate controls stopped working? Seamlessly restore operation by easily swapping the malfunctioning original module with this fully tested replacement unit.

Product Features:

Direct replacement – this HVAC control module matches the appearance and function of the original unit on specific vehicles.
Functionality-tested – module has been tested to ensure the same operation as the stock module.
Simple installation – no advanced vehicle knowledge is required for proper installation and setup
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$62.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$76.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$215.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$36.99

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

from

$21.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$353.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
O-Rings and gaskets necessary for installation are included.

from

$35.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.99

Carquest Premium Coolant Housings are manufactured with OEM quality materials and safety standards by an OE Supplier. This housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. The construction of this housing is improved over the OE design to fix and update any issues that the OE design may have had.

Product Features:

Product Features:

Easy, one step fit and installation
No special tools required
Meets or exceeds all OEM standards

from

$189.99

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion
All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$41.99

Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$11.49

GM Genuine Parts A/C Refrigerant Line Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$81.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$31.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

Radial Ball Bearing, Both Sides Shield.
Coverage of classic and new high-tech solutions for the best system coverage

from

$51.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$14.99

This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles
Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$53.99

ACDelco Professional Throttle Position Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$123.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$129.99

ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle’s original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Restores ABS function and performance caused by failed wheel speed sensor
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured with GM Original Equipment specification for fit, form, and function

from

$39.99

The ABS or Anti-Lock Brake System ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up and to help provide safer stopping. Reasons for replacement include: ABS/brake lamp illumination, no or erratic ABS operation or problems with stability and or traction control systems.

Product Features:

OE MATCHED: Manufactured to OE performance standards. Connectors, mounts and wire lengths are exact match to OE for worry free installation.
INSTALLATION AND SUPPORT: Includes all necessary brackets and hardware. Application specific harness length
THE DIFFERENCE: Glass reinforced plastic for better contamination resistance. Weather pack connectors prevent dirt and moisture contamination. Grease, mounting nut and instruction sheet included where applicable.

Upgrade your 1998 Chevrolet Express 1500 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1998 Chevrolet Express 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Express 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 158 Cooling and Climate Controls for the 1998 Chevrolet Express 1500, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Blend Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1998 Chevrolet Express 1500 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.49 to $486.99, with an average price of $62.83. Our 158 Cooling and Climate Controls in stock come from 19 trusted brands, so you’re sure to find the right part for your 1998 Chevrolet Express 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Chevrolet Express 1500, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like FELPRO, Carquest Premium, Dorman, and more. FELPRO Cooling and Climate Controls start at just $3.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $11.99, and at an average 4.4 stars rating. With 5,137 customer reviews and counting, our 1998 Chevrolet Express 1500 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Chevrolet Express 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 1500 in top shape, all in one place. Start shopping confidently below for your 1998 Chevrolet Express 1500!

Best-Selling Air Conditioning Parts for 1998 Chevrolet Express 1500s

Enhance the driving experience in your Chevrolet with 80 quality Air Conditioning Part components, starting at $1.49.

show more show less

from

$7.49

GM Genuine Parts A/C Service Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These spring-loaded valves allow service access to the A/C system. The service valves allow the service technician to evacuate and recharge the refrigerant in the A/C system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repairs leaking A/C system
Restores A/C function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$28.99

ACDelco Professional Temperature Control Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$13.29

GM Genuine Parts A/C Orifice Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Restores A/C performance due to restricted orifice tubes
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$11.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$235.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$41.99

Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.

Product Features:

Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
Ensure fit – check the product details to choose the best product for your needs
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$23.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$52.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$28.49

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Precision machined ports

from

$21.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$3.29

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$19.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$27.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$18.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$18.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$258.99

This premium new compressor improves upon the original equipment design by providing two additional pistons and a center seal lip to prevent a center seal leak created by road conditions. Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure a smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$19.79

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$62.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$22.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$37.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

Most Popular 1998 Chevrolet Express 1500 Blend Doors

Customize your Chevrolet with 6 Blend Doors products like Air Blend Door Actuators and Heater Blend Door Control Motors, all priced under $86.99.

show more show less

from

$49.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$58.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$33.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$86.99

ACDelco GM Original Equipment HVAC Air Valve Actuator is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment actuator will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$22.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$81.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Top Picks for 1998 Chevrolet Express 1500 Blower Motor and Related Products

Upgrade Chevrolet Express 1500s with top-quality Blower Motor and Related Products parts, including 15 OEM and aftermarket selections for your 1998 model.

show more show less

from

$104.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$90.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$57.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$45.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$96.99

ACDelco GM Original Equipment HVAC Blower Motor Resistors provide stepped voltage drops to provide multiple blower fan speeds and are GM-recommended replacements for your vehicle’s original components. This original equipment blower motor resistor has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Restores blower speed control caused by a failed resistor
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$58.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$129.99

The heating-ventilation-air-condition (HVAC) blower motor resistor is designed to control the speed of the interior blower motor. Older applications of this device consisted of 2-3 voltage resistor devices on a board while newer vehicle applications the device contains integrated circuitry and a heat sink to control the speed of the interior blower motor. Reducing voltage with a resistor will natural created large amounts of heat within the resistor block so the resistor will always be mounted in the vehicles ventilation system very near the blower motor itself so that the moving air may cool the resistor assembly. The common failure mode of this device is the loss of one or all speeds of the blower motor. When replacing the unit, the blower motor running amperage should be verified along with the incoming airflow to the heater system. If the incoming air passage should become blocked with leaves or debris, or, on certain vehicle application, should the cabin air cleaner become blocked impeding the movement of air into the cabin, the resistor will overheat and fail.

Product Features:

100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate operation providing product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$93.99

GM Genuine Parts HVAC Blower Motors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC blower motors are electric fans located in the HVAC housing. The fan pushes air through the heater core and evaporator and into the cabin. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Permanently lubricated, self-aligning bearings designed for long life and dependable performance
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$73.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$53.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$37.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$32.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Panel Switch provides intuitive control over the vehicle’s heating, ventilation, and air conditioning systems, enhancing comfort for passengers by allowing easy adjustments to temperature and airflow according to individual preferences. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$31.99

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

In-Demand Engine Cooling Parts for 1998 Chevrolet Express 1500s

Select from 49 premium Engine Cooling Parts parts for your 1998 Chevrolet Express 1500, with prices ranging from $3.99 to $288.99.

show more show less

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$4.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$14.99

Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles
Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$10.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$3.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$11.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$73.99

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$95.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$16.79

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$59.99

This replacement engine water pump is leak and flow tested. Gaskets and seals are included where applicable.

Product Features:

This pump is used on accessory belt driven applications
Used mostly on models equipped with a fan clutch
It is highly recommended that the fan clutch be replaced with the water pump
All gaskets or seals necessary for installation are supplied with pump
Durable housing features precisely machined mounting surfaces for proper sealing

from

$24.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Color coded for easy identification
Zinc coated terminal to resist corrosion

from

$76.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$16.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$8.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$288.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$92.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$164.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$63.99

Mr. Gasket Swivel Water Necks are great for engine conversion applications where engine/radiator inlet and outlet ports may be in different locations versus original equipment. The outlet rotates 360 degrees and has a 30 degree angle for versatility. Die-cast aluminum construction is strong, and durably resisting corrosion and is chrome plated for classic looks. It has a thick mounting flange to prevent warping and provide a positive engine coolant seal. Included stainless steel Allen head cap screws mount flush with the top of the flange to provide a smooth, custom look. Designed for use with 1/2 inch radiator hoses.

Product Features:

Neck rotates 360 degrees 30 degree angle for maximum versatility in engine swaps
Die-cast aluminum for strength and durability and resist corrosion
Thick mounting flange prevents warping and provides a positive coolant seal
Chrome-plated for looks
Allen head stainless steel bolt mount flush to flange for custom look
Uses commonly available 1-1/2 radiator hose (casting I.D 1-3/16″)

Most Sold 1998 Chevrolet Express 1500 Heating Parts

Explore our best-selling Chevrolet parts for the 1998 Express 1500 among 6 OEM and aftermarket options starting from $26.99.

show more show less

from

$36.99

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

from

$93.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$26.99

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

from

$103.99

GM Genuine Parts HVAC Heater Water Flow Control Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC heater water flow control valves control the flow of engine coolant through the heater core. The heater water flow control valve is closed when maximum AC cooling is selected. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Visual- and leak-tested for durability
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$105.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$31.99

New Standard Replacement Rear Heater Core

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Top-Rated Cooling and Climate Controls Brands For Your 1998 Chevrolet Express 1500

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1998 Chevrolet Express 1500s. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 1998 Express 1500 start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1998 Chevrolet Express 1500 Cooling and Climate Controls

When it comes to maintaining or upgrading your 1998 Chevrolet Express 1500, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 1998 Chevrolet Express 1500. With over 3 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $4.16. Plus, with over 92 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $3.99

(68)

Engine Water Pump Gasket

“I’ve been driving into very rural places with no cell signal and theres always a possibility that sometimes AAA might not tow me. I’m not a master me”

from $3.99

(6)

Engine Water Pump Gasket

“Easy to order and friendly staff! A+++”

from $4.49

(18)

Multi-Purpose O-Ring

“Perfect fit, installed nicely.”

Popular Carquest Premium 1998 Chevrolet Express 1500 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1998 Chevrolet Express 1500 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1998 Express 1500, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $23.99 to $235.99, plus, with more than 14 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $104.99

(12)

Blower Motor: with Wheel

“Very good”

from $23.99

(1)

A/C Accumulator

“Works, welds are very nice looking. Can’t really see what’s inside, what really matters. As long as the system is evacuated with a quality vacuum pump”

from $235.99

(1)

A/C Condenser

“Good fit for 2001 GMC Savana 2500. A little thinner than the original but works great”

FAQs for 1998 Chevrolet Express 1500 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1998 Chevrolet Express 1500s?

Out of 158 Cooling and Climate Controls that fit 1998 Chevrolet Express 1500s, the following parts are the top sellers:

Engine Water Pump Gasket (5180503) – $3.99
Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch (19230027) – $95.99
Radiator Cap: 16 PSI (17110038) – $16.79

What’s the price range for 1998 Chevrolet Express 1500 Cooling and Climate Controls?

Cooling and Climate Control prices for the 1998 Chevrolet Express 1500 start at $1.49 and go up to $486.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1998 Chevrolet Express 1500?

The average price for Cooling and Climate Controls for the 1998 Chevrolet Express 1500 is $62.83. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Chevrolet Express 1500 model years?

Yes, we currently carry Cooling and Climate Controls for 17 model years of Chevrolet Express 1500s between 1996 and 2014. Cooling and Climate Controls are bought most frequently for the following model years: 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, and 2006.

What are the cheapest Cooling and Climate Controls for my 1998 Chevrolet Express 1500?

The cheapest 1998 Chevrolet Express 1500 Cooling and Climate Controls we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
A/C Orifice Tube (11745060) – $2.99
A/C White Orifice Tube (10052818) – $3.29
Engine Water Pump Gasket (5180503) – $3.99
Engine Water Pump Gasket (3205096) – $3.99

What are the top-rated Cooling and Climate Controls that fit the 1998 Chevrolet Express 1500?

Out of 5,137 reviews by customers, our 1998 Chevrolet Express 1500 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1998 Chevrolet Express 1500 and their top-rated products:

Blower Motor and Related Products
- Blower Motor: with Wheel (10041247) – $104.99
- 4-Way Female Gray Multi-Purpose Pigtail (15730204) – $90.99
- HVAC Blower Motor Resistor (10086038) – $57.99
Engine Cooling Parts
- Blower Motor: with Wheel (10041247) – $104.99
- 4-Way Female Gray Multi-Purpose Pigtail (15730204) – $90.99
- HVAC Blower Motor Resistor (10086038) – $57.99

What types of Cooling and Climate Controls do you sell for my 1998 Chevrolet Express 1500?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1998 Chevrolet Express 1500:

Can I get help with 1998 Chevrolet Express 1500 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Cooling and Climate Controls and more.

What is your return policy for Chevrolet Express 1500 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Chevrolet Express 1500 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Chevrolet Express 1500 Cooling and Climate Controls

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38654)

Carquest Premium – A/C Accumulator (Part No.T83238)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35756)

Carquest Premium – Multi-Use Connector (Part No.PTA1174)

Motorad – Engine Coolant Thermostat Housing Assembly Thermostat: With Inlet, With Seal, 187 Degrees (Part No.524KT)

Felpro – Engine Water Pump Gasket Kit (Part No.ES 73030)

Dorman – Remanufactured Climate Control Module (Part No.599-127)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34175)

Carquest Premium – Universal Fan Clutch – 6" Thermal (Part No.215157)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T7053)

Carquest Premium – HVAC Vacuum Closed Bypass Heater Valve (Part No.T74781)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C New; w/ Clutch; w/ HT6 Compressor (Part No.T88931)

Carquest Premium – Multi-Use Connector (Part No.PTA1091)

Carquest Premium – Coolant Housing/Water Outlet: With Gasket (Part No.CH5169)

Factory Air – New Nippondenso 10S17F Clutch Assembly with Coil (Part No.47348)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1171)

GM Genuine Parts – Air Conditioning Evaporator Fitting Gasket (Part No.15-2722)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-125)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2647)

FAG US – Bearing – DGBB (Deep Groove Ball Bearing) (Part No.5908-VAW)

Carquest Premium – AC Pressure Switch (Part No.ABA1091)

Dorman – Water Pump Mounting Hardware Kit (Part No.902-804)

ACDelco – Multi-Purpose Pigtail (Part No.PT2319)

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T55234)

ACDelco – ABS Wheel Speed Sensor (Part No.22865720)

NTK – ABS Wheel Speed Sensor (Part No.VB0028)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-5438)

ACDelco – Multi-Purpose Relay (Part No.D1741C)

GM Genuine Parts – Air Conditioning Orifice Tube (Part No.15-5151)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35756)

Dorman – A/C Service Valve Cap (Part No.902-025)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

Carquest Premium – A/C Condenser (Part No.2320)

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

Carquest Premium – A/C Accumulator (Part No.T33118)

Carquest Premium – A/C Accumulator (Part No.T83202)

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T39192)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C White Orifice Tube (Part No.T38623)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35974)

Factory Air – Standard Relay (Part No.36008)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36659)

Carquest Premium – A/C Premium OEM Improved, New, with Clutch, with HT6 Compressor (Part No.T58947)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34175)

Driveworks – Ball Bearing (Part No.S-907257)

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T39133)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-100)

Dorman – HD Solutions – HVAC Blend Door Actuator: 1 Piece (Part No.604-5155)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-923)

GM Genuine Parts – Temperature Valve Actuator (Part No.15-71845)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-922)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-125)

Carquest Premium – Blower Motor: with Wheel (Part No.75788)

GM Genuine Parts – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1231)

Dorman – HVAC Blower Motor Resistor (Part No.973-007)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1009)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1171)

GM Genuine Parts – Heating and Air Conditioning Blower Control Module (Part No.15-81796)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.FAA1159)

Carquest Premium – HVAC Blower Motor Resistor Kit (Part No.RUC1964)

GM Genuine Parts – Heating and Air Conditioning Blower Motor (Part No.15-81950)

Carquest Premium – Blower Motor: without Wheel (Part No.35681)

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT731)

Dorman – Blower Motor Resistor Kit with Harness (Part No.973-529)

Carquest Premium – Multi-Use Connector (Part No.PTA2375)

Carquest Premium – HVAC Blower Control Switch (Part No.BLA1018)

Dorman – HVAC Blower Motor Resistor (Part No.973-229)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Felpro – Multi-Purpose O-Ring (Part No.35710)

Felpro – Engine Water Pump Gasket (Part No.13032)

Dorman – Water Pump Mounting Hardware Kit (Part No.902-804)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10075)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10231)