1998 Audi A6 Quattro Drivetrains
More 1998 Audi A6 Quattro Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1998 Audi A6 Quattro, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1998 Audi A6 Quattro Drivetrains
Elring – Pinion Seal (Part No.J7010130391ELR)
from
$21.42
Pinion Seal
National – Bearings (Part No.107)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
INA – Differential Bearing (Part No.J7060654749INA)
from
$42.15
Differential Bearing
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Febi – CV Joint Bolt (Part No.K6050439247FEB)
from
$2.08
The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
NTN – Differential Bearing (Part No.J7060741150NTN)
from
$39.02
Differential Bearing
Dorman – Rear Drive Shaft: OE Fix (Part No.936-634)
from
$1592.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
Dorman – Torque To Yield Axle Bolts; 17 mm Hex Size, 140 mm Length, 16 mm Thread Diameter, 2 Pack (Part No.615-007)
from
$34.49
This axle bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GKN Drivetech – Axle Assembly, New (Part No.K4000126840GKN)
from
$496.83
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
National – Bearings (Part No.32010-X)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Corteco – Drive Axle Seal (Part No.J7043385180CFW)
from
$13.28
Drive Axle Seal
GKN Drivetech – CV Boot Kit (Part No.K601038649GKN)
from
$28.44
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K6010134018GKN)
from
$39.48
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K6010453767GKN)
from
$28.77
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Rein – CV Boot Kit (Part No.BKN0136)
from
$19.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
GKN Drivetech – CV Joint Kit (Part No.K600085212LOB)
from
$299.49
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
GKN Drivetech – CV Joint Kit (Part No.K6000230729GKN)
from
$146.99
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.710316)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – VAL EP ATF 6/1 QT (Part No.899179)
from
$14.99
VAL EP ATF 6/1 QT
Popular 1998 Audi A6 Quattro Drivetrains Categories
1998 Audi A6 Quattro Drivetrains
You count on your 1998 Audi A6 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 40 Drivetrains ranging in price from $2.08 to $1,553.99, you’re sure to find everything you need for your 1998 Audi A6 Quattro.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like DriveWorks, National, and Dorman. 1998 Audi A6 Quattro Drivetrains start as low as $2.08!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 288 extensive product reviews on 1998 Audi A6 Quattro Drivetrains. Some of the top-rated Drivetrains products we carry are CV Axle Shaft Assembly with 4.0 stars and Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter with 3.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1998 Audi A6 Quattro below to get started!
Top-Rated Drivetrains Brands For Your 1998 Audi A6 Quattro
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Audi A6 Quattro running right for years to come. In our inventory you’ll find brands like DriveWorks, National, Dorman, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1998 Audi A6 Quattro back on the road. Some of the top-rated Valvoline products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1998 Audi A6 Quattro, and some of our most reviewed parts include:
FAQs for 1998 Audi A6 Quattro Drivetrains
What are the most purchased Drivetrains for the 1998 Audi A6 Quattro?
Out of 40 Drivetrains for the 1998 Audi A6 Quattro, the most popular in our inventory are:
What are the top-rated 1998 Audi A6 Quattro Drivetrains?
Top-rated Drivetrains for your 1998 Audi A6 Quattro based on customer reviews/ratings are:
from
$35.99
(11)
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
“The only thing I could find to fit an aftermarket axle that was on the car. If your e46 330XI has a front axle with a round inner carrier instead if t”
from
$23.99
(7)
Universal C.V. Joint Boot Kit Front Outer
“This is a soft plyable Composite Material.Not like the harder cheaper boots. Very easy to use. I would get the pliers that install the strap correct”
