1997 Mercury Cougar Drivetrains
More 1997 Mercury Cougar Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1997 Mercury Cougar, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1997 Mercury Cougar Drivetrains
Neapco – Universal Joint (Part No.2-3011)
Motive Gear – Differential Pinion Seal (Part No.3604)
from
$5.79
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Carquest Premium – New CV Axle (Part No.NCV11539)
Yukon Gear – Chrome Cover For 8.8" Ford (Part No.32009)
Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford (And IFS) With 28 Spline Axles (Part No.16019)
from
$285.99
Yukon standard open spider gear kit for 8.8″ Ford (and IFS) with 28 spline axles and 3/4″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 8.8″ open differential with 28 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Axle Bearing For 9" Ford (Part No.10057)
from
$132.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing for 9″ Ford. 1.531″ I.D., 3.150″ O.D. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing for Ford 9″
- Sealed design
- 3.150″ O.D.
- 1.531″ I.D.
- Services one side
Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)
from
$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.
Product Features:
See More
Product Features:
- 35 spline
- 8 x 3.96″ bolt pattern
- Cut to length design fits 40″-43.5″ applications
- Fits Dana Spicer 60, 70 and 80
Yukon Gear – 8.8" Ford Tracloc Clutch Set (Carbon), Both Sides, 2003-2010 Cobra Svt (Part No.16104)
from
$342.99
8.8″ Ford TracLoc clutch set (Carbon), both sides, 2003-2010 Cobra SVT.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Ford 8.8″ trac Loc positraction
- Carbon fiber clutches
Yukon Gear – Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od) (Part No.41048)
from
$286.99
Yukon flange yoke for 8.8″ Ford passenger and 8.8″ Ford IFS truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- Round companion flange
- 4.3″ O.D.
Yukon Gear – Crush Sleeve (Part No.33085)
from
$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
- 0.480″ tall
Driveworks – Axle Shaft Seal (Part No.S-714569)
Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)
National – Bearings (Part No.M86649)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Powertrax – Grip LS Traction System (Part No.LS108831)
from
$463.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support (Part No.37039)
from
$249.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM104911 carrier races and Daytona pinion support
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, pilot bearing, thread locker, marking compound with brush and gasket.
National – Bearings (Part No.LM67048)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Master Overhaul Kit For Ford 9" Lm501310 Differential (Part No.14053)
from
$279.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses carrier bearings & races with an I.D. of 1.625″ and an O.D. of 2.891″. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM501310 carrier race
- Included are Timken bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)
from
$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- Includes carrier bearings and races and “super” carrier shim kit
Dorman – Differential Clutch Kit (Part No.697-780)
from
$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
- Quality materials – all components are built for reliable longevity and performance
- Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
- Trustworthy quality – backed by team of designers and engineers in the United States
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size (Part No.41049)
from
$209.99
Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – 7.5" Ford Notched Cross Pin Shaft (Part No.33430)
from
$84.99
7.5″ Ford notched cross pin shaft. Not Auburn gear. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Product Features:
See More
Product Features:
- Notched cross pin shaft for Ford 7.5″
- 3.73 and up ratios
- Not compatible with Spartan Locker or Powertrax Lock Right
Felpro – Differential Cover Gasket (Part No.RDS 55341)
from
$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline (Part No.20070)
from
$404.99
Product Features:
See More
- Standard open carrier case and spiders
- Fits Ford 8.8″ with 31 spline axles
Yukon Gear – Pinion Nut (Part No.33154)
from
$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.
Product Features:
See More
Product Features:
- Pinion nut for Ford 7.5″, 8″ and 9″
- 3/4″ x 20 thread
- 1 1/6″ socket
Popular 1997 Mercury Cougar Drivetrains Categories
1997 Mercury Cougar Drivetrains
You count on your 1997 Mercury Cougar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 191 Drivetrains ranging in price from $0.99 to $883.99, you’re sure to find everything you need for your 1997 Mercury Cougar.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Moog, and Driveworks. 1997 Mercury Cougar Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,176 extensive product reviews on 1997 Mercury Cougar Drivetrains. Some of the top-rated Drivetrains products we carry are C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter with 3.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1997 Mercury Cougar below to get started!
Top-Rated Drivetrains Brands For Your 1997 Mercury Cougar
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Mercury Cougar running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1997 Mercury Cougar back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 1997 Mercury Cougar, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1997 Mercury Cougar Drivetrains
What are the most purchased Drivetrains for the 1997 Mercury Cougar?
Out of 191 Drivetrains for the 1997 Mercury Cougar, the most popular in our inventory are:
What are the top-rated 1997 Mercury Cougar Drivetrains?
Top-rated Drivetrains for your 1997 Mercury Cougar based on customer reviews/ratings are:
from
$21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
from
$29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
“100% recommended, very good attention, it was my first time shopping online in the store, without delay and any problem.
Thank you.”
