1997 Jeep Wrangler Bodies and Fender Parts

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• OE Style
• Direct Fit
• Rubber
• Eliminates Rattling; Wind Noise; Water Damage

New CAPA Certified Standard Replacement Driver Side Fender Splash Shield, With Aluminum Pin

Product Features:

• With Aluminum Pin, Made Of High Density Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The TCR bag has been designed to mount to Rugged Ridge RRC, XHD and Classic rear tire carrier bumpers. This bag allows the storage of all your recovery gear between the A-frame uprights on your rear tire carrier. Constructed of weather resistant material

Product Features:

• Textured Black

This Wrangler emblem from Omix-Ada is enforced with double sided 3M automotive adhesive tape for an extra strong hold. (MOPAR license pending)

Product Features:

• Wrangler
• OE Style
• Direct Fit
• Limited 5 Year Warranty

This frame repair kit offers a cost-effective way to repair a rusted or damaged chassis frame, rather than replacing the entire frame.

Product Features:

• Cost-effective fix – this chassis frame overlay repair kit allows a rusted frame section to be repaired without requiring a complete frame replacement
• Quality construction – this frame repair kit is made of stamped steel for strength and durability
• Durably engineered – this heavy-gauge steel framer overlay is finished in weldable primer for a clean weld-on installation
• Quality tested – this part has undergone vehicle try-on testing to ensure a quality fit

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Foam Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

Screw; Spare Tire Ca

New Standard Replacement Driver Side Floor Brace, 53 X 13 X 6

Product Features:

• 53 X 13 X 6, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This floor support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – this floor channel repair kit installs in place over the damaged section of the bodywork without the need to fabricate a repair piece
• Ready to install – this repair panel is pre-formed for a precise fit and is finished in weldable primer for a clean installation
• Application specific – made to match the dimensions and material for certain Jeep Wrangler application
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Rivet; Fender Liner;

Complete the look with a set of Rugged Ridge tubular tough duty side steps. Available in 3-Inch round, 4-Inch round, and 4.25-Inch oval diameter sizes. The large 4.25-Inch oval and 4-Inch round tubes provide a much cleaner look and are not dwarfed by over

Product Features:

• Gloss Black
• 3 in. Round
• No-Slip Step Pad
• Brackets and Hardware Included
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Heavy-duty rocker panels are designed to provide maximum protection for your Jeep’s most vulnerable points. Manufactured from 3/16 inch thick steel plate with a tough black textured finish, these heavy-duty rockers can take a beating. Each features cutout

Product Features:

• Protects Rocker Panels From Damage
• Cutouts To All Use Off-road Jack
• 2 in. Step For Easy Access
• Limited 5 Year Warranty

Interior Panel Retai

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1987-1995 Wrangler, Body Fastener Kit, With Soft Top (703 Pieces)

Laser Measured MudFlaps are custom fit and protect your vehicle s fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle s wheels. No drilling required and installs in Minutes.

Product Features:

• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• MudFlap Will Offers Undeniable Vehicle Protection
• Features The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
• Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface

This black RRC rear bumper tire carrier has a frame mounted platform that features a heavy duty grid like system with raised sides for the ultimate protection and greatest ground clearance. Features 5X 4.5 bolt pattern. All RRC rear bumpers feature a rein

Product Features:

• Black

Now, with the NEW All-Terrain Flat Fender Flares from Rugged Ridge you can add a bigger tire option for a true off road look. You can also use in combination with a suspension lift for maximum off road performance. These exciting new flares are out-of-the

Product Features:

• 1-Piece
• High Perimeter Wall Provides Maximum Protection
• Rolled Reinforced Edges For Added Strength
• Durable OE-Quality Thermoplastic
• Nibbed Bottoms For Secure Fitment

Protect your spare tire from sun’s rays with this heavy-duty Spare Tire Cover, available in a wide range of colors and sizes to suit your needs.

Product Features:

• Protects Spare Tire From Suns Rays
• Heavy Duty Denim Soft Top Material
• Elastic Strap to Insure Snug Fit

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Hurricane Fender Fla

Bolts to your existing factory spare tire mount and relocates the tire two inches up and out. Features 5×4.5 inch and 5×5.5 inch wheel bolt patterns and tough powder coated black textured finish. Caution: The tailgates on 07-12 Wrangler models are not des

Product Features:

• Black Powder Coated
• 5×4.5 in. and 5×5.5 in. Wheel Bolt Patterns
• Bolts To Your Existing Factory Spare Tire Mount
• Relocates the tire two inches up and out
• Limited 5 Year Warranty

At ARIES, we know what it means to be a Jeep owner. We know that the sky is your roof, the rocky slopes are your bread and butter, and the mud in your tires is the blood pumping through your veins. Owning a Jeep means fueling up with more than just gasoline because it’s passion that drives you every time you turn the ignition. That same passion has been our inspiration for the ARIES line of Jeep products. From our modular bumpers and tube doors to our security cargo lid and fender flares, ARIES is your gateway to the ultimate off-roading experience. The ARIES Jeep tire relocation carrier is made with high-strength carbon steel and covered in a durable, dual-layer E-coat and black powder coat finish to resist scuffs, grime and rust. It offers reliable strength and easy installation (NOTE: Using aftermarket lug nuts may prevent proper torqueing of the spare tire to the carrier. Refer to the installation instructions for additional information and torque values).

Product Features:

• Allows for a larger spare tire up to 35″ in diameter
• Securely bolts onto existing rear door tire carrier
• Maintains easy access to the rear cargo area
• Brackets fortify tire relocation carrier to accept larger tires
• Strong steel construction with a durable E-coat and black powder coat finish

XHD Corner Guard; Re

Get that offroad look with Rugged Ridge Body Armor! Each Body Armor piece is constructed of black diamond plate looking UV treated thermoplastic for the coolest, toughest looking up-grade for your Jeep. Each body armor attaches to your Jeep with ultra str

Product Features:

• Black Diamond Plate Thermoplastic
• UV Treated
• Attaches w/ Automotive Grade Double Sided Tape
• Covers Typical Scratched and Dented Areas
• Limited 5 Year Warranty