1997 Jeep Wrangler Body Parts

Over time, both the struts and mounting hardware on your Jeep’s liftgate will wear or break with use. Looking for a reliable solution? This durable liftgate ball stud from Omix-ADA replaces the factory one that becomes rusty or breaks off.

Product Features:

• Right Side
• OE Style
• Direct Fit
• Durable
• Limited 5 Year Warranty

Is the hood to cowl seal deteriorating on your 97-06 Jeep Wrangler? You can tell by checking to see if the seal is brittle and weathered; or maybe your hood could be rattling. If so, it is time to replace it with the Omix-ADA OE replacement hood to cowl s

Product Features:

• Direct OE Replacement
• Built To Original Specifications
• 5 Year Limited Warranty

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Manual Door Mirror, Black, Fits Both Full And Half Doors. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• Black, Fits Both Full And Half Doors, Flat Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Floor Brace, 53 X 13 X 6

Product Features:

• 53 X 13 X 6, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Steel Grab Handles

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Plastic
• OE Style
• Direct Fit
• Right Side
• Limited 5 Year Warranty

Protect your spare tire from sun’s rays with this heavy-duty Spare Tire Cover, available in a wide range of colors and sizes to suit your needs.

Product Features:

• Protects Spare Tire From Suns Rays
• Heavy Duty Denim Soft Top Material
• Elastic Strap to Insure Snug Fit

Tailgate stopper, adjustable, sturdy stop keeps tailgate from closing when needed.

Product Features:

• Adjustable And Sturdy
• Keeps Tailgate From Closing

Protect your Jeep Wrangler doors from theft! Simply replace the upper hinge nuts with the easy to install McGard Door Locks. Once installed, the locks match the OEM hinge nuts, but can only be removed with the special key tool.

Product Features:

• High security through-hardened steel construction protects against gripping, drilling & cutting.
• The external spin-collar feature turns if attacked by gripping tools to protect against unwanted removal.
• Manufactured in the U.S.A.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Window Glass; Rear L

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring winch and shackle capabilities with a 12.5K rating. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch-and-shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070, roller fairlead #2156071 and winch fairlead mount #15600FB. For added winch protection and an aggressive look on the Jeep JL, a stinger-style angular brush guard #2156050 is available. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear ARIES one-piece bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation and is covered by a three-year warranty.

Product Features:

• Shackle rating of 12,500 lbs. for ultimate off-road functionality
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Center cutout for rear mount trailer hitch receiver tube
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Protecting the rear corners of your Jeep just got a whole lot easier! Now offering added protection and a rugged look for your Wrangler, this pair of Rugged Ridge Body Armor rear corners are constructed from impact resistant polycarbonate and have a styli

Product Features:

• Matte Black
• Polycarbonate
• Protects Rear Corners From Trail Damage
• Double Sided Adhesive Tape
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

Product Features:

• With 2 Washer Nozzles, Without Power Bulge, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Or Passenger Side Front Exterior Door Handle, Textured Black

Product Features:

• Textured Black, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

OUTER GLASS SEAL; RH

C2 Cargo Curtain; Fr

FndrFlareHdwKt

Add a bold rugged look while protecting your Jeep with the Rugged Ridge Grille Guard. Designed to bolt onto your existing factory bumper, the Front Guard bolts on in minutes with no drilling necessary. Made of 3/8 inch steel side plates and 2.5 inch tubul

Product Features:

• Textured Black
• Added Protection
• Use w/ 11511.01 and 11511.03
• Limited 5 Year Warranty

This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:

• Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
• Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
• Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
• Easy installation – no special tools or equipment is necessary for installing this new part

Rocker Guard Kit- Bo

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

The WeatherTech Mud Flap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech Mud Flap will offer undeniable vehicle protection.

Product Features:

• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Feature The Patented QuickTurn Hardened Stainless Steel Fastening System
• Mud Flap Will Offer Undeniable Vehicle Protection
• No Drilling Required

Protect your front grille from bugs and debris with this stainless steel weather resistant radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Insta

Product Features:

• Stainless Steel
• Weather Resistant
• Sold Individually
• Hardware Included
• Bound By Soft Rubber To Prevent Vehicle Scratching

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Black
• OE Style
• Direct Fit
• Single
• Limited 5 Year Warranty

New Standard Replacement Passenger Side Rear Fender Flare, Black Texture Passenger Side Rear Fender Flare, Black Texture

Product Features:

• Black Texture Passenger Side Rear Fender Flare, Black Texture, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle