1997 Ford F-250 HD Performance and Racing Products
Find Your Specific 1997 Ford F-250 HD Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1997 F-250 HD. Advance Auto Parts has popular F-250 HD parts like Performance Oil Filters, Performance Air Filters, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F-250 HD model years. Select a category of 1997 Ford F-250 HD Performance and Racing Products below and start saving instantly.
Popular 1997 Ford F-250 HD Performance and Racing Products Categories
Essential Performance and Racing Products for 1997 Ford F-250 HDs
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)
from
$141.99
Product Features:
See More
- Use W/ Valve Springs Part #5722, 5796
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Mr. Gasket – Water Neck (Part No.2664)
from
$35.99
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with gasket and mounting bolts
- Chrome plated
Edelbrock – Performer-Plus camshaft for Small-Block Ford 351W V-8 applications (Part No.2182)
from
$356.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
Energy Suspension – Sway Bar Bushing Set (Part No.4.5105G)
from
$37.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
MSD Ignition – Distributor Cap; Ford HEI; Black (Part No.84083)
from
$67.99
All the quality and performance you’ve come to expect from MSD is now available in black. Our customers have requested black parts for their builds so we’ve answered with the addition of several black distributor caps and cap and rotor kits. The black parts are built to the exact specifications of the traditional MSD red components. If you’re looking to change up the look under the hood of your street machine, off-road rig or race car; check out the complete line of MSD black components.
Product Features:
See More
Product Features:
- Injection Molded From DuPont Rynite Material
- Extreme strength; high dielectric properties
- Designed with performance in mind
- High quality; voltage insulating material
- Brass terminals
- Black in color
Energy Suspension – Body Cab Mount Set (Part No.4.4107R)
from
$121.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)
from
$614.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)
from
$158.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)
from
$45.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Thick parallel ground washer provides more accurate, uniform torque
- Hex Prevents Socket Slippage
- Accurate And Uniform Torque
- Black Plated Finish
MSD Ignition – Distributor; Ford 351W; Ready-to-Run (Part No.8354)
from
$635.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Advance plate and weights are fine blanked from chrome moly steel
- Mech. advance assem. can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 8 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10792)
from
$419.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 117% cfm Flow Gain
- Improved Throttle Response
Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)
from
$86.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Fd-478
- MSD 5527
- Standard Motor Products SMP Fd-478
- MSD 5527
- Resists Shock And Vibration
- Resists Corrosion
aFe POWER – Power Module (Part No.77-43030)
from
$285.99
Increased Power and Performance: SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that flash IN the ECM, our performance chips receive data from the ECM and alter signals appropriately._x000d_Easy Installation: After removal of the vehicles ECM, the installation is a breeze. Remove the cover to find the ECM port connections, clean the ports, then simply slide the chip into the ECM. No cutting, splicing, or modifications of wiring is necessary._x000d_Four Power Settings: A knob can be mounted in the cabin for easy, on-the-fly adjustability to accommodate any driving situation. The four settings are: +50 Horsepower, +75 Horsepower, +100 Horsepower, HOT IN (up to +140 Horsepower)_x000d_Fitment Note: This part number works with ECM DPC-202 code and supports the following box codes: LKM, MIF, NAW, PRE, PRY, TDE, TEE, YBT and ZAA.
Product Features:
See More
Product Features:
- +224 lbs. x ft. TQ & +133 HP
- Increases Boost Pressure and Optimizes Fuel Injection Timing
- Enhances Shift Points and Firmness
- On-the-Fly Adjustability via a 4-Position Knob
Energy Suspension – Sway Bar Bushing Set (Part No.4.5124G)
from
$33.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2131R)
from
$25.49
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$67.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1076.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
Mr. Gasket – Valve Cover (Part No.9413)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. 7-bolt design. Sold as a pair.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- Sold as a pair
- Fits Ford big block (385 series)
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Mr. Gasket – Valve Cover Gasket Set (Part No.276)
from
$35.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.E-1946)
from
$157.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 6 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-6001)
from
$21.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.63-1014)
from
$367.99
The K&N AirCharger 63-1014 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1014 air intake comes with a chrome topped K&N high-flow air filter that clamps onto the air intake hoses giving you a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools.
Product Features:
See More
Product Features:
- Guaranteed horsepower gain
- Designed to improve throttle response and engine sound
- Easy to install, usually in 60 minutes or less
- Replaces entire factory air intake system
- Not legal for highway use in states adopting California emission regulations
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Upgrade your 1997 Ford F-250 HD with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1997 Ford F-250 HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F-250 HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Performance and Racing Products for the 1997 Ford F-250 HD, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Air Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1997 Ford F-250 HD at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $1,076.99, with
an average price of $110.21.
Our 57 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1997 Ford F-250 HD without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford F-250 HD, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N Accel, and more.
K&N Performance and Racing Products
start at just $21.99 and boast an impressive 4.8 stars average rating from customers.
With 184 customer reviews and counting, our 1997 Ford F-250 HD Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1997 Ford F-250 HD is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 HD in top shape, all in one place.
Start shopping confidently below for your 1997 Ford F-250 HD!
Best-Selling Performance Oil Filters for 1997 Ford F-250 HDs
Enhance the driving experience in your Ford with 1 quality Performance Oil Filter components, starting at $21.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-6001)
from
$21.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Most Popular 1997 Ford F-250 HD Performance Air Filters
Customize your Ford with 1 Performance Air Filters products
like Performance Air Filters, all
priced under $157.99.
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.E-1946)
from
$157.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 6 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Top Picks for 1997 Ford F-250 HD Performance Distributors
Upgrade Ford F-250 HDs with top-quality Performance Distributors parts, including 8 OEM and aftermarket selections for your 1997 model.
MSD Ignition – Distributor; Ford 351W; Ready-to-Run (Part No.8354)
from
$635.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Advance plate and weights are fine blanked from chrome moly steel
- Mech. advance assem. can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
MSD Ignition – Distributor Cap; Ford HEI; Black (Part No.84083)
from
$67.99
All the quality and performance you’ve come to expect from MSD is now available in black. Our customers have requested black parts for their builds so we’ve answered with the addition of several black distributor caps and cap and rotor kits. The black parts are built to the exact specifications of the traditional MSD red components. If you’re looking to change up the look under the hood of your street machine, off-road rig or race car; check out the complete line of MSD black components.
Product Features:
See More
Product Features:
- Injection Molded From DuPont Rynite Material
- Extreme strength; high dielectric properties
- Designed with performance in mind
- High quality; voltage insulating material
- Brass terminals
- Black in color
MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)
from
$635.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Simple And Clean Installation w/Only Three Wires To Connect
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Polished steel shaft is guided by a sealed ball bearing
MSD Ignition – Distributor; Ford TFI; 351W (Part No.8453)
from
$607.99
When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also quip-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a special gear to work with the?factory camshafts.
Product Features:
See More
Product Features:
- Drop in billet replacement for late model Ford TFI 5.8L dist.
- Supplied w/steel gear to work w/factory roller camshafts
- Factory style ignition module connector accepts factory wiring
- CNC machined billet aluminum housing and billet aluminum base
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Supplied w/Late Model Distributor Cap And Rotor
- Legal to install in all 50 states
MSD Ignition – Distributor; Ford 351W; with Hydraulic Roller Steel Gear (Part No.85840)
from
$562.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- Maintenance-free magnetic pickup and advance assembly
- Same height and width as PN[8584]
- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range
- Polished steel shaft is QPQ coated and guided by a sealed ball bearing and extra long sintered bushing
MSD Ignition – Distributor; Ford 351W; with Edelbrock Victor Jr (Part No.85805)
from
$539.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- Same features as PN[8584]
- Use w/Edelbrock Victor Jr. man. for add. clearance at water neck
- No CARB Exemption Order Number
- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range
- Polished steel shaft is QPQ coated and guided by two sealed ball bearings
- Advance weight pins are staked and tig welded to the plate
- Supplied with cap-a-dapt and rotor (accepts MSD socket style caps)
- Must be used with an MSD Ignition control
MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)
from
$158.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$67.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
In-Demand Performance Exhaust Products for 1997 Ford F-250 HDs
Select from 2 premium Performance Exhaust Products parts for your 1997 Ford F-250 HD, with prices ranging from $26.49 to $60.99.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
Hooker Headers – Super Competition Header Gasket (Part No.10882HKR)
from
$26.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Most Sold 1997 Ford F-250 HD Performance Engines
Explore our best-selling Ford parts for the 1997 F-250 HD among 10 OEM and aftermarket options starting from $8.99.
Mr. Gasket – Water Neck (Part No.2662)
from
$23.79
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Chrome Plated
- This Is A 45 Degree Neck
- Comes With O-ring And Bolts
- Has Small Hose Fitting On It
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)
from
$45.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Thick parallel ground washer provides more accurate, uniform torque
- Hex Prevents Socket Slippage
- Accurate And Uniform Torque
- Black Plated Finish
Mr. Gasket – Valve Cover Gasket Set (Part No.276)
from
$35.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Water Neck (Part No.2664)
from
$35.99
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with gasket and mounting bolts
- Chrome plated
Edelbrock – Performer-Plus camshaft for Small-Block Ford 351W V-8 applications (Part No.2182)
from
$356.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)
from
$141.99
Product Features:
See More
- Use W/ Valve Springs Part #5722, 5796
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Competition Cams – Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (Part No.4818-8)
from
$24.99
Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud
Competition Cams – ENGINE ROCKER ARM (Part No.1411-1)
from
$23.29
ENGINE ROCKER ARM
Competition Cams – Flat 1 Piece Guide Plate for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (Part No.4818-1)
from
$8.99
Flat 1 Piece Guide Plate for Ford 289-351W with 3/8" Pushrod and 7/16" Stud
Top-Rated Performance and Racing Products Brands For Your 1997 Ford F-250 HD
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1997 Ford F-250 HDs. Below you’ll find some of our best rated Performance and Racing Products from K&N and Accel, and more. Performance and Racing Products from these brands that fit a 1997 F-250 HD start at just $21.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 1997 Ford F-250 HD Performance and Racing Products
When it comes to maintaining or upgrading your 1997 Ford F-250 HD, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1997 Ford F-250 HD. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.99, with an average price of just $182.66. Plus, with over 10 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$21.99
(6)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“Great filter for the price”
from
$157.99
(2)
Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance
“Great prouduct!”
from
$367.99
(2)
Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter
“This product works great, and was really easy to install.”
Popular Accel 1997 Ford F-250 HD Performance and Racing Products
Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1997 Ford F-250 HD owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1997 F-250 HD, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $86.99, plus, with more than 28 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1997 Ford F-250 HD Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1997 Ford F-250 HDs?
Out of 57 Performance and Racing Products that fit 1997 Ford F-250 HDs, the following parts are the top sellers:
- Body Cab Mount Set (22908100) – $121.99
- Ultra Seal: Harmonic Balancer Bolt/Washer Kit (6120474) – $45.49
- Valve Cover Gasket Set (6902006) – $35.99
What’s the price range for 1997 Ford F-250 HD Performance and Racing Products?
Performance and Racing Product prices for the 1997 Ford F-250 HD start at $8.99 and go up to $1,076.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1997 Ford F-250 HD?
The average price for Performance and Racing Products for the 1997 Ford F-250 HD is $110.21. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Performance and Racing Products for my 1997 Ford F-250 HD?
The cheapest 1997 Ford F-250 HD Performance and Racing Products we carry in stock are:
- Flat 1 Piece Guide Plate for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (50288866) – $8.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120027) – $21.99
- ENGINE ROCKER ARM (50272934) – $23.29
- Water Neck (6124186) – $23.79
- Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (50288088) – $24.99
What are the top-rated Performance and Racing Products that fit the 1997 Ford F-250 HD?
Out of 184 reviews by customers, our 1997 Ford F-250 HD Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1997 Ford F-250 HD and their top-rated products:
- Performance Air Filters
- Performance Oil Filters
- Performance Air Intake Kits
What types of Performance and Racing Products do you sell for my 1997 Ford F-250 HD?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1997 Ford F-250 HD:
Can I get help with 1997 Ford F-250 HD Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford F-250 HD Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford F-250 HD Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
