1997 Chevrolet Express 2500 Steering and Chassis Parts
More 1997 Chevrolet Express 2500 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1997 Chevrolet Express 2500, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1997 Chevrolet Express 2500 Steering and Chassis Parts
Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)
from
$21.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response and du
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Powercraft – Steering Gear Major Seal Kit (Part No.8776)
from
$57.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Lares – Remanufactured Power Steering Gear Box (Part No.1420)
from
$372.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Carquest Premium – Pressure Hose Assembly (Part No.36078)
from
$34.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)
from
$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
National – Multi Purpose Seal (Part No.PSK-1)
from
$31.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Steering Column Shift Mechanism (Part No.905-120)
from
$106.99
This steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles
- Restores functionality – reliable replacement for an original mechanism that has failed due to wear or collision damage
- Durable construction – this mechanism is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG – Center Link (Part No.DS300048)
from
$361.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Powdered metal gusher bearing design enables grease to flow through bearing
- Engineered steel composition results in a stronger component
- Full ball metal stud provides 360 Degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Loose or worn chassis parts can lead to premature tire wear
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Dorman – Variable Steering Solenoid Bypass Tube (Part No.926-049)
from
$72.99
Remove the opportunity for another power steering control valve failure. This bypass valve eliminates failure-prone original equipment fluid valve.
Product Features:
See More
Product Features:
- Permanent repair – This bypass tube eliminates the failure-prone original equipment proportioning valve for predictable performance and reliability
- Reliable fit – precision-engineered to match the original power steering pump
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – this design has undergone corrosion and on-vehicle fit testing
Driveworks – Tie Rod End (Part No.DW-EV80191)
from
$46.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
MOOG – Control Arm and Ball Joint Assembly (Part No.RK80942)
from
$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ACDelco – Professional Idler Arm (Part No.M3020591745ACD)
from
$93.41
ACDelco Advantage Idler Arms feature a precision-machined arm, housing, and socket end to ensure fit and function. The heavy-duty conical coil spring and cold-formed, heat-treated T-stud deliver the performance, while the hot-forged arm and bracket provide the strength you would expect from ACDelco.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Precision-machined arm, housing, and socket
- Heavy-duty conical coil spring
- Heat-treated T-stud
National – Bearings (Part No.100-CC4)
from
$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Sway Bar Kit (Part No.927-102)
from
$175.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
ACDelco – P/S Return Hose (Part No.M2016523804ACD)
from
$177.99
P/S Return Hose
MOOG – Stabilizer Bar Kit (Part No.K170004)
from
$261.99
MOOG solid sway bar kits, complete with sway bar links and bushings with synthetic fabric liner (where applicable), are made of solid, forged steel for improved durability over hollow designs, reducing the likelihood of breakage due to rusted welds.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION — Includes MOOG solid sway bar, Problem Solver® sway bar link kit and synthetic fabric-lined bushings (where applicable)
- STRUCTURAL STRENGTH — Solid forged steel construction resists breaking and offers improved strength and long life over hollow OE sway bar
- CORROSION PROTECTION — Durable black E-coating inhibits premature deterioration
- EASY TO INSTALL — Precision tolerances for easy installation giving you a perfect fit right out of the box
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Tie Rod End (Part No.RP26931)
from
$34.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MOOG – Caster/Camber Adjusting Kit (Part No.K6302)
from
$50.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
GM Genuine Parts – Idle Speed Control Power Steering Pressure Switch (Part No.10218778)
from
$40.49
GM Genuine Parts Multi Purpose Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Alignment Kit – Front (Part No.DW-K100026)
from
$46.99
Alignment Kit – Front
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG – Stabilizer Bar Bushing Kit (Part No.K6439)
from
$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Rare Parts – Extreme Pitman Arm (Part No.RP20610)
from
$229.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- 30mm full ball stud eliminates binding between Pitman Arm & Idler Arm
- SAE 1541 forged & heat treated forging. Increased size for added strength
- Heat treated steel race
- Relocated 90 degree Grease Fitting for easy access
- U.S. made
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Back Up Light Connector (Part No.PTA1061)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Professional Ball Joint (Part No.L2020577192ACD)
from
$121.36
ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.
Product Features:
See More
Product Features:
- Superb strength and durability thanks to precision manufactured housing and components
- Advanced corrosion protection against the harshest conditions
- Permanently attached boot reduces contamination, makes installation easier
- Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
- No spring means no end play, easier installation
- One-piece forged housing for easier steering
Popular 1997 Chevrolet Express 2500 Steering and Chassis Parts Categories
1997 Chevrolet Express 2500 Steering and Chassis Parts
You count on your 1997 Chevrolet Express 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 158 Steering and Chassis Parts ranging in price from $5.99 to $345.99, you’re sure to find everything you need for your 1997 Chevrolet Express 2500.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 18 different brands like Driveworks, Imperial, and Moog. 1997 Chevrolet Express 2500 Steering and Chassis Parts start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,750 extensive product reviews on 1997 Chevrolet Express 2500 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Ball Joint with 4.6 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1997 Chevrolet Express 2500 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1997 Chevrolet Express 2500
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Chevrolet Express 2500 running right for years to come. In our inventory you’ll find brands like Driveworks, Imperial, Moog, and even more.
Popular National Steering and Chassis Parts
You’ll find popular National brand products across Steering Shafts. All are waiting to get your 1997 Chevrolet Express 2500 back on the road. Some of the top-rated National products in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1997 Chevrolet Express 2500, and some of our most reviewed Driveworks parts include:
FAQs for 1997 Chevrolet Express 2500 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1997 Chevrolet Express 2500?
Out of 158 Steering and Chassis Parts for the 1997 Chevrolet Express 2500, the most popular in our inventory are:
What are the top-rated 1997 Chevrolet Express 2500 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1997 Chevrolet Express 2500 based on customer reviews/ratings are:
from
$65.99
(37)
Ball Joint
“Had to preplace ball joint’s on vehicle!! Better have the ball joint removal/installer tool and big hammer too!!😁”
