1996 Jeep Grand Cherokee Transmission Parts

Below you will find various in-demand Jeep Transmission Parts, components and accessories for your 1996 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Automatic Transmission Parts, Transmission Seals, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Grand Cherokee model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1996 Jeep Grand Cherokee Transmission Parts below and start saving instantly.

Popular 1996 Jeep Grand Cherokee Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Transmission Solenoids

Transmission Oil Cooler Lines

Automatic Transmission Governors

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Automatic Transmission Line Assemblies

Transmission Temperature Sensors

Automatic Transmission Oil Pump Seals

Pinion Seals

Neutral Safety Switch Connectors

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Back Up Light Switch Connectors

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Transmission Gasket Sets

Gear Shift Lever Bushing

Transmission Shift Kits

Input Shaft Bearings

Transfer Case Mounts

Automatic Transmission Selector Shaft Seals

Shift Shaft Seals

Automatic Transmission Fluid Filler Tube Seals

Automatic Transmission Speedometer Pinion Seals

Automatic Transmission Torque Converter Housing Bolt

Automatic Transmission Seals

Remanufactured Automatic Transmissions

Automatic Transmission Throttle Valve Cable

Manual Transmission Bearing

Essential Transmission Parts for 1996 Jeep Grand Cherokees

from

$31.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.49

AT OIL PUMP SEAL

from

$19.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$147.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$3.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Provides Leak Free Operation
Hazardous Free Material
Offers OE Fit And Function
Long-Lasting, Durable Crown Automotive Products

from

$20.29

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Steel With Rubber Inner
OE Style
Direct Fit

from

$8.99

AT SEL SHAFT SEAL

from

$7.79

Transmission Mounting Bolt; 84-02 YJ/TJ/XJ/SJ/MJ/Z

from

$191.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$44.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$76.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to JEEP 93-98;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-1998
Weight approx: 4 Lbs

from

$112.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$43.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$56.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$38.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$11.99

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$17.49

AT EXT HOUSING SEAL

from

$74.99

AT SHIFT KIT

from

$3.99

AT SOLENOID SEAL

from

$51.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$422.99

AT MASTER REPAIR KIT

from

$47.49

This steel transfer case linkage drop bracket gives you exactly the transfer case repositioning option that you need after installing a lift kit in your Wrangler. Adding this bracket supports the necessary drop of the transfer case.

Product Features:

Steel
Easy to Install
Single
Direct Fit

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$23.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$2.99

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$7.99

Product Features:

Brand may vary by location

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

Upgrade your 1996 Jeep Grand Cherokee with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1996 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Transmission Parts are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Transmission Parts for the 1996 Jeep Grand Cherokee, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1996 Jeep Grand Cherokee at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $1,992.99, with an average price of $106.18. Our 94 Transmission Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 1996 Jeep Grand Cherokee without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Jeep Grand Cherokee, we stock popular OEM and aftermarket Transmission Parts from top names like National, DriveWorks, Imperial, and more. National Transmission Parts start at just $14.99 and boast an impressive 4.3 stars average rating from customers. DriveWorks and Imperial also bring quality to the table, with Transmission Parts available starting at $7.99, and at an average 4.3 stars rating. With 894 customer reviews and counting, our 1996 Jeep Grand Cherokee Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place. Start shopping confidently below for your 1996 Jeep Grand Cherokee!

Best-Selling Automatic Transmission Parts for 1996 Jeep Grand Cherokees

Enhance the driving experience in your Jeep with 15 quality Automatic Transmission Part components, starting at $3.99.

show more show less

from

$3.99

AT SOLENOID SEAL

from

$34.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$56.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$142.99

AT GOV SENSOR

from

$117.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$23.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$10.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$1992.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1992.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1992.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1819.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$1819.99

Product might not be available in all states due to local laws.

from

$1819.99

Product might not be available in all states due to local laws.

from

$211.99

AT CONTR SOLENOID

from

$87.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Most Popular 1996 Jeep Grand Cherokee Transmission Seals

Customize your Jeep with 27 Transmission Seals products like Pinion Seals, Transmission Seals and O-rings, and Manual Transmission Output Shaft Seals, all priced under $24.49.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$16.29

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$23.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$24.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$19.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

AT SEL SHAFT SEAL

from

$10.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.29

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$2.99

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$12.99

AT TORQUE CONVT SEAL

from

$13.29

AT EXT HOUSING SEAL

from

$3.99

AT SEAL

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.99

Do you have a gear oil leak around your differential pinion? Worried you could run low on gear oil and ruin the differential? Omix-ADA offers high-quality replacement pinion seals to keep the gear lube inside the differential where it belongs.

Product Features:

Steel With Rubber Inner
OE Style
Direct Fit

Top Picks for 1996 Jeep Grand Cherokee Transmission Cooler and Parts

Upgrade Jeep Grand Cherokees with top-quality Transmission Cooler and Parts parts, including 15 OEM and aftermarket selections for your 1996 model.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$51.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$41.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$23.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

In-Demand Transmission Bearings for 1996 Jeep Grand Cherokees

Select from 8 premium Transmission Bearings parts for your 1996 Jeep Grand Cherokee, with prices ranging from $7.99 to $34.49.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Product Features:

Brand may vary by location

from

$34.49

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Sold 1996 Jeep Grand Cherokee Transmission Mounts

Explore our best-selling Jeep parts for the 1996 Grand Cherokee among 3 OEM and aftermarket options starting from $47.49.

show more show less

from

$76.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-1998
Weight approx: 4 Lbs

from

$67.99

Transmission Mount;

from

$47.49

Steel
Easy to Install
Single
Direct Fit

Top-Rated Transmission Parts Brands For Your 1996 Jeep Grand Cherokee

Shop for the best-rated brands offering Transmission Parts and other products for your 1996 Jeep Grand Cherokees. Below you’ll find some of our best rated Transmission Parts from National, DriveWorks, and Imperial, and more. Transmission Parts from these brands that fit a 1996 Grand Cherokee start at just $7.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1996 Jeep Grand Cherokee Transmission Parts

When it comes to maintaining or upgrading your 1996 Jeep Grand Cherokee, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1996 Jeep Grand Cherokee. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $16.26. Plus, with over 7 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $15.99

(1)

Multi-Purpose Seal

“Bought 2 of these seals, 710058, as I have 2 Jeep TJ’s that are having the same leak. Apparently, getting the fluid too hot causes these seals to giv”

from $17.79

(3)

Multi Purpose Seal

“Fit perfectly and stopped the leak. For anyone who needs to know, I used this seal for my Tremec TKO 600 transmission. This seal is a direct replaceme”

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

Popular DriveWorks 1996 Jeep Grand Cherokee Transmission Parts

DriveWorks auto parts is one of the highest quality Transmission Part brands in the market. Any 1996 Jeep Grand Cherokee owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1996 Grand Cherokee, Advance Auto Parts carries a full inventory of 3 DriveWorks Transmission Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these DriveWorks Transmission Parts range from $7.99 to $10.99, plus, with more than 13 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $10.99

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

from $7.99

(2)

Oil Seal

“Perfect fit”

from $10.49

(3)

Oil Seal

“Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”

FAQs for 1996 Jeep Grand Cherokee Transmission Parts

Which Transmission Parts are best-sellers for 1996 Jeep Grand Cherokees?

Out of 94 Transmission Parts that fit 1996 Jeep Grand Cherokees, the following parts are the top sellers:

Pedal and Shift Linkage Bushing Assortment (9110078) – $11.99
Tapered Roller Bearing Cone (5052513) – $23.99
Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (5785251) – $8.99

What’s the price range for 1996 Jeep Grand Cherokee Transmission Parts?

Transmission Part prices for the 1996 Jeep Grand Cherokee start at $1.99 and go up to $1,992.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1996 Jeep Grand Cherokee?

The average price for Transmission Parts for the 1996 Jeep Grand Cherokee is $106.18. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Jeep Grand Cherokee model years?

Yes, we currently carry Transmission Parts for 30 model years of Jeep Grand Cherokees between 1993 and 2024. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 1996 Jeep Grand Cherokee?

The cheapest 1996 Jeep Grand Cherokee Transmission Parts we carry in stock are:

OE Replacement, Black, Rubber, Single (50074109) – $1.99
Automatic Transmission Speedometer Pinion Seal (11236107) – $2.99
AT SOLENOID SEAL (11239035) – $3.99
AT SEAL (11236293) – $3.99
Auto Transmission Manual Shaft Seal (11494000) – $3.99

What are the top-rated Transmission Parts that fit the 1996 Jeep Grand Cherokee?

Out of 894 reviews by customers, our 1996 Jeep Grand Cherokee Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1996 Jeep Grand Cherokee and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (5785251) – $8.99
- Transmission Oil Pan: Direct Fit, Steel, 10 Quart (11138446) – $46.99

What types of Transmission Parts do you sell for my 1996 Jeep Grand Cherokee?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1996 Jeep Grand Cherokee:

Can I get help with 1996 Jeep Grand Cherokee Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Transmission Parts and more.

What is your return policy for Jeep Grand Cherokee Transmission Parts?

Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1996 Jeep Grand Cherokee Transmission Parts

Carquest Premium – Multi-Use Connector (Part No.PTA1078)

ATP – AT OIL PUMP SEAL (Part No.TO-8)

National – Multi Purpose Seal: Single Lip, 50mm Inner Diameter, 65.33 mm Outer Diameter (Part No.1209)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR94L)

Crown Auto Jeep Replacmnt – OE Replacement, White, Plastic, Single (Part No.4167964)

Omix – Pinion Yoke Seal; for Dana 35 (Part No.16521.20)

ATP – AT SEL SHAFT SEAL (Part No.TO-15)

Omix – Transmission Mounting Bolt; 84-02 YJ/TJ/XJ/SJ/MJ/Z (Part No.18886.98)

Crown Auto Jeep Replacmnt – For Use With Aw4 Transmission, With Switch And Pigtail (Part No.4882173)

Carquest Premium – Coolant Temperature Sensor 1TS1225 (Part No.WTC1062)

National – Bearing Race (Part No.M802011)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2828)

Crown Auto Jeep Replacmnt – OE Replacement, With Gasket/ Filter (Part No.52108327K)

National – Shaft Repair Sleeve (Part No.99193)

Carquest Premium – Multi-Use Connector (Part No.PTA2923)

Carquest Premium – Multi-Use Connector (Part No.PTA1148)

Dorman – Help – Pedal and Shift Linkage Bushing Assortment (Part No.14041)

ATP – AT EXT HOUSING SEAL (Part No.TO-73)

ATP – AT SHIFT KIT (Part No.TK-2)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-307)

ATP – AT MASTER REPAIR KIT (Part No.TM-58)

Rugged Ridge – Transfer Case Linkage Drop Bracket (Part No.18305.05)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-809)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Driveworks – Taper Bearing Set (Part No.S-A-36)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-806)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-805)

ATP – AT GOV SENSOR (Part No.TE-9)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBC4959)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-809)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-384)

Shift Pro by ETE – A500 Automatic Transmission Assembly (Part No.T150109)

Shift Pro by ETE – A500 Automatic Transmission Assembly (Part No.T150116)

Shift Pro by ETE – A500 Automatic Transmission Assembly (Part No.T150119)

Moveras – 42RE – Automatic Transmission (Part No.M00157AB)

Moveras – 42RE – Automatic Transmission (Part No.M00158CB)

Moveras – 42RE – Automatic Transmission (Part No.M00263)

ATP – AT CONTR SOLENOID (Part No.TE-1)

Carquest Premium – Automatic Transmission Kickdown Solenoid (Part No.SAA5416)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.7300S)

National – Multi-Purpose Seal (Part No.710058)

National – Multi-Purpose Seal (Part No.331228H)

Driveworks – Oil Seal (Part No.S-4370N)

National – Differential Pinion Seal (Part No.5778)

Driveworks – Oil Seal (Part No.S-5778)

National – Multi-Purpose Seal (Part No.714675)

Driveworks – Oil Seal (Part No.S-331228H)

National – Multi Purpose Seal (Part No.8609)

National – Multi-Purpose Seal (Part No.719316)

National – Multi-Purpose Seal (Part No.710319)

National – Multi Purpose Seal: Single Lip, 50mm Inner Diameter, 65.33 mm Outer Diameter (Part No.1209)

ATP – AT SEL SHAFT SEAL (Part No.TO-15)

National – Multi Purpose Seal (Part No.221207)

National – Multi-Purpose Seal (Part No.710597)

Motive Gear – Differential Pinion Seal (Part No.5778)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

ATP – AT SEAL (Part No.TO-34)

National – Multi-Purpose Seal (Part No.2465)

Driveworks – Oil Seal (Part No.S-710058)

Omix – Pinion Oil Seal; Dana 44; 72-06 Jeep Models (Part No.16521.08)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)