1996 Ford F53 Camshafts

Essential 1996 Ford F53 Camshafts

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.7167)

Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8

from

$423.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

Dorman – Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each) (Part No.555-055)

Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each)

from

$2.29
Our Engine Camshaft Plugs are available in multiple styles, including Cup Type, Pilot Seal, Reverse Taper, Concave, and Quick-Seal® Rubber. Our unique Seal Expansion Plug ensures a leak-proof fit.

Product Features:
  • Many sizes available
  • Conveniently available in packs of different quantities
  • Constructed from high quality steel, copper, brass, or rubber
  • Dorman’s Engine Camshaft Plugs are constructed to strict engineering quality standards
See More
View Product

Sealed Power – Engine Camshaft Bearing Set (Part No.1414M)

Engine Camshaft Bearing Set

from

$52.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More
View Product

NTK – Camshaft Position Sensor (Part No.EC0117)

Camshaft Position Sensor

from

$32.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More
View Product

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DU-70)

Original Equipment (O.E.) Sensor Assembly

from

$39.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:
  • Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
  • The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
  • The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
  • Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
  • Designed for long service life under harsh under-hood conditions.
  • Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
  • Designed with OE electrical connectors ensuring proper fits.
See More

(1 reviews)
View Product

Delphi – Engine Camshaft Position Sensor (Part No.SS10058)

Engine Camshaft Position Sensor

from

$31.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More
View Product

Carquest Premium – Camshaft Sensor (Part No.CSC1031)

Camshaft Sensor

from

$28.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More
View Product

Carquest – Camshaft Sensor (Part No.35C1005)

Camshaft Sensor

from

$21.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • 100% testing to meet OE performance
  • High temperature resistance for longer life
See More
View Product

DENSO – Camshaft Position Sensor (Part No.196-6012)

Camshaft Position Sensor

from

$36.99
DENSO’s camshaft position sensors are manufactured to the stricktest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technlogy which helps control ignition timing more precisely.

Product Features:
  • OE technology adapted for the aftermarket
  • Reduces emissions, increased performance
  • Delivers the highest reliability and detection accuracy
See More
View Product

Carquest – Distributor Ignition Pickup (Part No.ME58)

Distributor Ignition Pickup

from

$53.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High temperature enameled wires were specified for better insulation and performance
  • With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More
View Product

1996 Ford F53 Camshafts

Maybe you’re in the middle of a full rebuild of that 1996 Ford F53. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 4 different Camshafts in our inventory ranging from $2.29 to $423.99. That means you can find the exact parts or products you need to keep that 1996 Ford F53 running smoothly.

Camshafts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Ford F53. Carquest, Dorman, and Sealed Power are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Camshafts for your 1996 Ford F53, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Camshafts to keep your 1996 Ford F53 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Camshafts Brands To Make Your 1996 Ford F53 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Ford F53 demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your F53 the best it can be. Be sure to browse some of our top Camshafts brands and parts.

More Popular Parts for All Makes