1996 Ford Aerostar Camshafts

Essential 1996 Ford Aerostar Camshafts

Cardone – Camshaft Synchronize (Part No.A4018867886CAR)

Camshaft Synchronize

from

$124.14
Cardone Remanufactured camshaft synchronizers provide reliable performance at the best price. Each unit is 100% tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance ensuring that your vehicle always starts on command. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • Automated test equipment verifies signal strength, correct polarity of wire harness, air gap and coil performance
  • Precise machining tolerances prevent oil leaks, poor timing, setting of “check engine light” and premature failure
  • Gear hardness determined by application so as to not damage or pre-maturely wear out related components
  • All electronic modules are 100% tested to ensure full functionality
  • Every unit is 100% tested to ensure quality and reliability
See More

Carquest – Engine Camshaft Position Sensor (Part No.22C1003)

Engine Camshaft Position Sensor

from

$62.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • 100% testing to meet OE performance
  • High temperature resistance for longer life
See More

Carquest Premium – Distributor Ignition Pickup (Part No.MEA2286)

Distributor Ignition Pickup

from

$57.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NTK – Camshaft Position Sensor (Part No.EC0119)

Camshaft Position Sensor

from

$88.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSC1141)

Engine Camshaft Position Sensor

from

$77.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1843M)

Engine Camshaft Bearing Set

from

$41.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1838M)

Engine Camshaft Bearing Set

from

$39.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1443M)

Engine Camshaft Bearing Set

from

$33.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1844M)

Engine Camshaft Bearing Set

from

$41.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

National – Multi Purpose Seal (Part No.473560N)

Multi Purpose Seal

from

$11.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 45108)

CAMSHAFT FRONT SEAL SET

from

$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Cardone New – Camshaft Synchronizer (Part No.84-S2604)

Camshaft Synchronizer

from

$60.99
CARDONE New Camshaft Synchronizers provide reliable performance at the best price. Each unit is 100% tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance ensuring that your vehicle always starts on command. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • Precise machining tolerances prevent oil leakage, poor timing, setting of the “Check Engine” light, and premature failure
  • All electronic module components are 100% computer tested to ensure full functionality
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

Carquest Premium – Camshaft Synchronizer – 100% NEW (Part No.T2606)

Camshaft Synchronizer - 100% NEW

from

$58.99
ToughOne ignition distributors and cam synchronizers are 100% new units. They include caps, rotors, and electronic components to ensure a bolt-off/bolt-on solution.

Product Features:
  • 100% tested to original equipment specifications (form, fit and function).
  • Precision machined ground shafts assure high speed accuracy and prevent bearing failures.
  • Alignment positioning tool included (where applicable) to ensure proper installation.
  • 100% tested to Original Equipment specifications (form, fit and function).
  • New Ignition Modules designed and manufactured to meet original equipment specifications.
  • Stringent sensor vane wheel manufacturing process ensures a fixed pulse width.
  • Durable aluminum and plastic construction.
  • 100% New Components and fasteners eliminate premature failure.
See More

Carquest Premium – Camshaft Synchronizer – 100% NEW (Part No.T2603)

Camshaft Synchronizer - 100% NEW

from

$78.99
CARQUEST camshaft synchronizers captures the camshaft position/speed and sends the info to the ECM to ensure proper ignition timing, maximizing horsepower and fuel economy.

Product Features:
  • 100% tested to original equipment specifications (form, fit and function).
  • Precision machined ground shafts assure high speed accuracy and prevent bearing failures.
  • Alignment positioning tool included (where applicable) to ensure proper installation.
See More

Carquest Premium – Engine Camshaft Synchronizer (Part No.CZC1009)

Engine Camshaft Synchronizer

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Validation tested from -40 to 300 degrees Fahrenheit
  • Life-cycle tested to meet or exceed OE specifications
  • OE-style brackets, hold downs, hardware, spacers and weather-tight connectors
  • Proper alignment, positioning and spacing for faster, easier installation
  • Sensor is properly sealed to prevent leaks
  • Sealed connections to prevent environmental corrosion and performance issues
  • Direct OE replacement
  • Global coverage for import and/or domestic applications
See More

Cardone New – Camshaft Synchronizer (Part No.84-S2606)

Camshaft Synchronizer

from

$156.99
CARDONE New Camshaft Synchronizers provide reliable performance at the best price. Each unit is 100% tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance ensuring that your vehicle always starts on command. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • Precise machining tolerances prevent oil leakage, poor timing, setting of the “Check Engine” light, and premature failure
  • All electronic module components are 100% computer tested to ensure full functionality
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

Cardone New – Camshaft Synchronizer (Part No.84-S2605)

Camshaft Synchronizer

from

$271.99
CARDONE New Camshaft Synchronizers provide reliable performance at the best price. Each unit is 100% tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance ensuring that your vehicle always starts on command. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • Precise machining tolerances prevent oil leakage, poor timing, setting of the “Check Engine” light, and premature failure
  • All electronic module components are 100% computer tested to ensure full functionality
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

Dorman – Steel Cup Expansion Plug 2.00 In., Height 0.420 (sold by each) (Part No.555-069)

Steel Cup Expansion Plug 2.00 In., Height 0.420 (sold by each)

from

$1.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 2-1/4 In., Height 0.369 (sold by each) (Part No.555-111)

Steel Cup Expansion Plug 2-1/4 In., Height 0.369 (sold by each)

from

$2.29
Our Engine Camshaft Plugs are available in multiple styles, including Cup Type, Pilot Seal, Reverse Taper, Concave, and Quick-Seal® Rubber. Our unique Seal Expansion Plug ensures a leak-proof fit.

Product Features:
  • Many sizes available
  • Conveniently available in packs of different quantities
  • Constructed from high quality steel, copper, brass, or rubber
  • Dorman’s Engine Camshaft Plugs are constructed to strict engineering quality standards
See More

Dorman – Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270 (sold by each) (Part No.555-073)

Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270 (sold by each)

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each) (Part No.555-033)

Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each)

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1-1/4 In., SC, Height 0.300 (sold by each) (Part No.555-024)

Steel Cup Expansion Plug 1-1/4 In., SC, Height 0.300 (sold by each)

from

$1.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

1996 Ford Aerostar Camshafts

Maybe you’re in the middle of a full rebuild of that 1996 Ford Aerostar. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 16 different Camshafts in our inventory ranging from $1.29 to $156.99. That means you can find the exact parts or products you need to keep that 1996 Ford Aerostar running smoothly.

Camshafts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Ford Aerostar. Carquest Premium, Dorman, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Camshafts for your 1996 Ford Aerostar, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Camshafts to keep your 1996 Ford Aerostar rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Camshafts Brands To Make Your 1996 Ford Aerostar Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Ford Aerostar demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Aerostar the best it can be. Be sure to browse some of our top Camshafts brands and parts.

Popular Carquest Premium Camshafts

We carry Carquest Premium parts in our stock across Camshaft Synchronizers categories, plus more. For a 1996 Ford Aerostar, our most popular Carquest Premium Camshafts include:
Camshaft Synchronizer - 100% NEW
from $58.99
(2)
Camshaft Synchronizer – 100% NEW
Camshaft Synchronizers
Camshaft Synchronizer - 100% NEW
from $78.99
(1)
Camshaft Synchronizer – 100% NEW
Camshaft Synchronizers

FAQs for 1996 Ford Aerostar Camshafts

What are the most purchased Camshafts for the 1996 Ford Aerostar?

Out of 16 Camshafts for the 1996 Ford Aerostar, the most popular in our inventory are:
Engine Camshaft Position Sensor
from $77.99
This product is not rated
Engine Camshaft Position Sensor
Camshaft Position Sensors
Multi Purpose Seal
from $11.49
(1)
Multi Purpose Seal
Camshaft Seals
Engine Camshaft Position Sensor
from $75.99
This product is not rated
Engine Camshaft Position Sensor
Camshaft Position Sensors