1995 Toyota 4Runner Drivetrains
More 1995 Toyota 4Runner Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1995 Toyota 4Runner, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1995 Toyota 4Runner Drivetrains
Driveworks – Oil Seal (Part No.S-1177)
from
$9.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Bearing Install Kit For Toyota Turbo 4 And V6 Differential With 27 Spline Pinion (Part No.11092)
from
$504.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses high quality bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.
Product Features:
See More
Product Features:
- Fits Toyota V6 rear
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
National – Multi Purpose Seal (Part No.710595)
from
$20.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)
Yukon Gear – T100 Rear Differential With ABS Fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra (Part No.10059)
from
$298.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. T100 rear differential W/ ABS fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for 2001-2002 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra rear
- Includes axle bearing, inner and outer axle seals and snap ring
- This kit will work with ABS applications
- Services one side
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – C.V. Joint Bolted Split Boot Kit Outer (Part No.03608)
from
$32.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and clamps
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
Dorman – Pre-Pressed Rear Axle (Part No.926-141)
from
$873.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install..
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box.
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Trustworthy quality – backed by engineers and inspectors in the United States, with decades of aftermarket experience
Yukon Gear – 8" Roll Pin, Solid (Part No.33412)
Yukon Gear – 1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface (Part No.30220)
from
$65.99
1177, 7.5″, 8″, V6 Toyota REDI sleeve, saver for seal surface.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Toyota 7.5″, 8″ and V6
National – Multi Purpose Bearing (Part No.HB-24)
from
$227.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – 8" Cross Pin Shaft, Standard Open (Part No.33413)
Yukon Gear – Limited Slip Dffrntl (Part No.26057)
from
$769.99
Limited Slip Dffrntl
National – Bearings (Part No.LM102910)
from
$6.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)
from
$42.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rugged Ridge – Locking Hub (Part No.15001.13)
from
$348.99
Locking hubs can be subjected to much wear and tear, especially during off-roading. We have a tough and reliable solution for you. Rugged Ridge Manual Locking Hubs are unanimously recognized as the world’s toughest hubs by our thousands of satisfied custo
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – Minor Install Kit For New Toyota Clamshell Design Reverse Rotation Differential (Part No.12086)
from
$136.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. Side shims included.
Product Features:
See More
Product Features:
- Fits reverse rotation Toyota Landcruiser
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)
from
$16.99
Toyota 8″ & V6 pinion nut washer.
Product Features:
See More
Product Features:
- Pinion nut for Toyota 8″ and V6
Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)
from
$529.99
8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .
Product Features:
See More
Product Features:
- Fits Toyota Landcruiser reverse rotation front
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Seal Housing For Toyota Zip Locker (Part No.34011)
Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)
from
$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).
Product Features:
See More
Product Features:
- Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
- 5 needed
USA Standard Gear – Spool For Toyota V6 (Part No.59012)
Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)
Yukon Gear – Inner Stub Shaft Bearing For Toyota 7.5" IFS (Part No.18061)
Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)
from
$109.99
Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and V6
- 27 spline
- Round companion flange
Popular 1995 Toyota 4Runner Drivetrains Categories
1995 Toyota 4Runner Drivetrains
You count on your 1995 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 274 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 1995 Toyota 4Runner.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Valvoline, National, and Moog. 1995 Toyota 4Runner Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,156 extensive product reviews on 1995 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are CV Axle Shaft Assembly with 4.6 stars and Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter with 3.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1995 Toyota 4Runner below to get started!
Top-Rated Drivetrains Brands For Your 1995 Toyota 4Runner
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, National, Moog, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1995 Toyota 4Runner back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1995 Toyota 4Runner, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1995 Toyota 4Runner Drivetrains
What are the most purchased Drivetrains for the 1995 Toyota 4Runner?
Out of 274 Drivetrains for the 1995 Toyota 4Runner, the most popular in our inventory are:
from
$32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
CV Quick Boot Kits
What are the top-rated 1995 Toyota 4Runner Drivetrains?
Top-rated Drivetrains for your 1995 Toyota 4Runner based on customer reviews/ratings are:
from
$132.99
(14)
CV Axle Shaft Assembly
“Axle appears to be identical to OEM. Joints are nice and tight. Boots and bands appear to be quality material. Only time will tell how they hold up.”
from
$29.99
(8)
Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter
“Worked great. Direct fit.”
