1979 Jeep J10 Performance and Racing Products

Essential 1979 Jeep J10 Performance and Racing Products

Omix – Engine Mount (Part No.17473.07)

Engine Mount

from

$58.99
Is your Jeep engine moving too much when you rev it up? Are there unusual noises when you accelerate? The rubber in the engine mounts takes a beating from engine torque every time you use the gas pedal. Omix-ADA offers high quality replacement engine moun

Product Features:
  • Left Or Right Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Russell – Street Legal, J10 & J20 Pickup with 4" lift (Part No.695920)

Street Legal, J10 & J20 Pickup with 4" lift

from

$85.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Accel – Distributor Cap And Rotor Kit (Part No.8220)

Distributor Cap And Rotor Kit

from

$64.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2003)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$22.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Omix – Bushing Pilot 87-91 (Part No.16910.07)

Bushing Pilot 87-91

from

$13.29
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that?Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:
  • 1987-1991 Wrangler 6 Cylinder, Pilot Bushing
  • 1987-1991 Models, Crankshaft Pilot Bearing (4.0L & 4.2L)
See More

Omix – Shock Absorber Plate (Part No.18271.10)

Shock Absorber Plate

from

$26.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Weld On
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Torque Converter, Nitrous Holeshot 3000

from

$766.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 2800-3200 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Omix – Valve Cover (Part No.17401.09)

Valve Cover

from

$184.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Polished
  • Aluminum
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Thermostat Gasket (Part No.17117.04)

Thermostat Gasket

from

$1.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Highly Durable
  • Long Lasting
  • Limited 5 Year Warranty
See More

Omix – Timing Cover (Part No.17457.07)

Timing Cover

from

$99.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Cover And Oil Pan Gasket
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Rocker Arm Stud Nut (Part No.17402.08)

Rocker Arm Stud Nut

from

$5.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Nut With Attached Lock Washer
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Flywheel; Manual Transmission (Part No.16912.08)

Flywheel; Manual Transmission

from

$373.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Use With AMC 360
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Cover Oil Seal (Part No.17449.50)

Timing Cover Oil Seal

from

$13.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal Outer Rubber Inner
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Engine Gasket Set (Part No.17442.04)

Engine Gasket Set

from

$76.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Lower Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Exhaust Flange Gasket (Part No.17451.09)

Exhaust Flange Gasket

from

$5.29
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a bad exhaust pipe gasket. Omix-ADA offers high quality exhaust gaskets to solve the problem.

Product Features:
  • Composite
  • Heat Resistant
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Water Pump (Part No.17104.12)

Water Pump

from

$90.99
Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

Product Features:
  • OE Style
  • Direct Fit
  • High Quality
  • Efficient Cooling
  • Limited 5 Year Warranty
See More

Rugged Ridge – Skid Plate (Part No.DMC-16597.44)

Skid Plate

from

$184.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles and

Product Features:
  • Black Powder Coated
  • 3/16 in. Steel
  • Use w/ Factory Diff Cover
  • Mounting Hardware Included
  • Jeep Logo
See More

Omix – Oil Cap (Part No.17403.01)

Oil Cap

from

$5.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal Top With Rubber Gasket
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Motive Gear – Differential Mini Spool (Part No.MSD44-30)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL – DANA 44, 30 SPL.
See More

Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

from

$424.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Not for Stock Motorcraft Spread Bore Carburetor
  • Two Center Bolt Holes are Offset
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Omix – Engine Gasket Set (Part No.17441.07)

Engine Gasket Set

from

$105.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Upper Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Oil Pan Gasket (Part No.17439.06)

Oil Pan Gasket

from

$56.99
Tired of looking at the stains on your driveway? Are you repairing or rebuilding your engine? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Transmission Shift Knob (Part No.18807.01)

Transmission Shift Knob

from

$11.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Black
  • Plastic
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Earls Performance Product – Solo Bleed (Part No.280021ERL)

Solo Bleed

from

$32.59


Product Features:
  • Prevents Air Inclusion
  • Direct Replacement
  • For OE Bleeders
  • One Person Bleeds Safely
  • Without The Mess
  • No Chance Of Air Bubbles
See More

Richmond Gear – Differential Ring And Pinion (Part No.69-0057-1)

Differential Ring And Pinion

from

$379.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

1979 Jeep J10 Performance and Racing Products

You count on your 1979 Jeep J10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 64 Performance and Racing Products ranging in price from $1.49 to $825.99, you’re sure to find everything you need for your 1979 Jeep J10.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 17 different brands like Accel, Mr. Gasket, and K&N. 1979 Jeep J10 Performance and Racing Products start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 192 extensive product reviews on 1979 Jeep J10 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Distributor; 6-cyl. AMC Jeep 232-258; 4.0L with 4.0 stars and Skid Plate with 2.6 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1979 Jeep J10 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1979 Jeep J10

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Jeep J10 running right for years to come. In our inventory you’ll find brands like Accel, Mr. Gasket, K&N, and even more.

Popular B & M Performance and Racing Products

You’ll find popular B & M brand products across Performance Engines. All are waiting to get your 1979 Jeep J10 back on the road. Some of the top-rated B & M products in these categories are:
Tork Master 2400
from $339.99
(1)
Tork Master 2400
Performance Torque Converters

FAQs for 1979 Jeep J10 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1979 Jeep J10?

Out of 64 Performance and Racing Products for the 1979 Jeep J10, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
High Performance Thermostat
from $27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats

What are the top-rated 1979 Jeep J10 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1979 Jeep J10 based on customer reviews/ratings are:
Distributor; 6-cyl. AMC Jeep 232-258; 4.0L
from $605.99
(5)
Distributor; 6-cyl. AMC Jeep 232-258; 4.0L
“Work’s great. My problem was it would not shut off.”
Skid Plate
from $184.99
(5)
Skid Plate
“The part was perfect, the car runs better and drive smoother than before, highly recommend Advance Auto Parts”
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”