1995 Lincoln Mark VIII Cooling and Climate Controls

Name: Heater Core
Brand: Carquest Premium
SKU: 398308
Price: 58.99 USD

Below you will find various in-demand Lincoln Cooling and Climate Controls, components and accessories for your 1995 Mark VIII. Advance Auto Parts has popular Mark VIII parts like Engine Cooling Parts, Blower Motor and Related Products, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Mark VIII model years including 1993, 1994, 1996, 1997, 1998 and more. Select a category of 1995 Lincoln Mark VIII Cooling and Climate Controls below and start saving instantly.

Popular 1995 Lincoln Mark VIII Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Radiator Caps

AC Compressor Without Clutch

Coolant Temperature Sensors

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Air Conditioning Relays

AC Condensers

AC Compressor Bypass Pulleys

AC Line O-Rings

Radiator Fan Control Relays

AC Compressor Cut-Out Relays

AC Caps and Valve Core Kits

Engine Water Pump Relays

AC Relay Connectors

Thermostat Seals

AC Clutch Coil Connectors

Accumulator and Receiver Driers

AC Line O-Ring Kits

AC Clutch Bearings

Engine Water Pump Bypass Pipe O-Ring Kit

AC O-Ring and Gasket Kits

AC Discharge Lines

Temperature Switch and Senders

Water Pump Gaskets

AC Clutch Cycle Switches

AC Line Repairs

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Compressor Cut-Off Switches

AC Pressure Transducer Connectors

Coolant Fan Motor Connectors

AC Switch Connectors

Thermostat Housing O-Rings

Coolant Temp Sending Unit Switch Connectors

AC Refrigerant Pressure Sensors

Radiator Cap Tester Adapters

AC Compressor Seals

HVAC Pressure Transducers

AC Line Clip

AC Clutch Coils

HVAC Temperature Delay Relay Harness Connectors

Essential Cooling and Climate Controls for 1995 Lincoln Mark VIIIs

from

$58.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Manufactured for the sealing repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$214.99

New Platinum Pro Radiator, 4.6 Liter V8 Engine

Product Features:

4.6 Liter V8 Engine, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$302.99

New Standard Replacement A/C Compressor, FS10, 6 Groove, V8 Engine

Product Features:

FS10, 6 Groove, V8 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$102.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$20.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.29

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$72.77

Motorcraft gas and diesel engine water pumps contain a precision bearing to help deliver a long and efficient performance. Additionally, stamped or cast impellers meet OE pumping requirements.

Product Features:

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$41.99

from

$12.82

Santech Industries is a global supplier of OE quality automotive air conditioning components and A/C service kits to the aftermarket.

Product Features:

Type: Pressure
Color: Black
Fitting: M12-1.5 Female
Normal: Open
Closed: 44 PSI
Open: 24 PSI
OEM: F3AH-19E561AA

from

$189.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$99.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$63.99

New Standard Replacement A/C Refrigerant Discharge Hose

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.55

Thermostat O-Ring

from

$24.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$50.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$9.79

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$20.34

A/C O-Ring Kit

from

$28.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

Upgrade your 1995 Lincoln Mark VIII with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1995 Lincoln Mark VIII, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Mark VIII functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Cooling and Climate Controls for the 1995 Lincoln Mark VIII, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1995 Lincoln Mark VIII at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $367.99, with an average price of $57.00. Our 98 Cooling and Climate Controls in stock come from 22 trusted brands, so you’re sure to find the right part for your 1995 Lincoln Mark VIII without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Lincoln Mark VIII, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, FELPRO, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $4.99, and at an average 5 stars rating. With 1,902 customer reviews and counting, our 1995 Lincoln Mark VIII Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Lincoln Mark VIII is always ready to roll. We’re committed to providing you with everything you need to keep your Mark VIII in top shape, all in one place. Start shopping confidently below for your 1995 Lincoln Mark VIII!

Best-Selling Engine Cooling Parts for 1995 Lincoln Mark VIIIs

Enhance the driving experience in your Lincoln with 45 quality Engine Cooling Part components, starting at $1.44.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Manufactured for the sealing repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$18.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$15.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$176.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$9.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$94.99

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$6.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$66.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$17.29

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$72.77

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$41.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Sender Assembly literally sends engine fuel to the engine under pressure created by the fuel pump.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into Motorcraft Sender Assemblies, ensuring the most current technology.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.

from

$5.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$24.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$42.42

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$124.99

ENGINE WATER PUMP

from

$49.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$39.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$34.49

from

$14.43

Water Temperature Se

from

$40.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$367.99

Black Magic Electric Fan

from

$347.99

Black Magic Electric Fan

from

$214.99

New Platinum Pro Radiator, 4.6 Liter V8 Engine

Product Features:

4.6 Liter V8 Engine, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$77.10

Water Pump

from

$60.69

Motorcraft Water Temperature Senders are designed for durability and electrical performance in Ford and Lincoln vehicles.

Product Features:

They feature threads and a seal that are matched to the vehicle application – no one-size-fits-all solution
Coolant temperature senders have the proper output curve to work with the vehicle temperature gauge, which helps prevent misreading

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$21.97

The Motorcraft Thermostat is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

Heavy-duty quality for long life
Stainless steel or brass bridge and spring frame, channel-constructed for strength and rigidity
Stainless steel, tapered-end pistons with flexible elastomeric boots
Streamlined venturi nozzle for maximum coolant flow
Brass cover and guide for heat motor piston
Mounting flange designed to properly fit and seat the thermostat in the housing
Stainless steel spring offers precise operating compression
Heat motor in high-strength brass housing
Rulon seal for heat motor piston
Specially formulated expansive wax compound

from

$14.10

Thermostat

from

$11.73

The Motorcraft Original Equipment Radiator Cap is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

Standard and safety vent radiator pressure caps available
Extensive coverage for most cars and trucks, as well as farm and construction equipment
Swivel-seal radiator caps are designed to provide increased durability and can be removed without damage to the rubber atmospheric seal
Zinc-plated to resist corrosion and rust
Pressure valve springs are made of stainless steel to maintain calibrated pressure throughout the service life
Rubber pressure valve gasket resists high temperatures and deterioration from coolant and additives
Pressure and vacuum relief features help extend radiator and hose life
Prevent accidental cap removal with positive low-pressure stop feature

from

$10.99

RADIATOR CAP

from

$10.91

Water Temperature Se

from

$8.99

ENG COOL TEMP SENDER

from

$4.76

Thermostat O-Ring

from

$4.55

Thermostat O-Ring

from

$1.44

Water Pipe O-Ring

Most Popular 1995 Lincoln Mark VIII Blower Motor and Related Products

Customize your Lincoln with 3 Blower Motor and Related Products products like Blower Motors and Blower Motor Resistors, all priced under $194.99.

show more show less

from

$50.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$189.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$194.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models.
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs.
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

Top Picks for 1995 Lincoln Mark VIII Heating Parts

Upgrade Lincoln Mark VIIIs with top-quality Heating Parts parts, including 2 OEM and aftermarket selections for your 1995 model.

show more show less

from

$102.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$58.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

In-Demand Air Conditioning Parts for 1995 Lincoln Mark VIIIs

Select from 47 premium Air Conditioning Parts parts for your 1995 Lincoln Mark VIII, with prices ranging from $0.99 to $302.99.

show more show less

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$28.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$153.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$4.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$54.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$20.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$38.49

All hoses are constructed with double wall barrier hose compatible with R134A or R12; Contains gaskets, o-rings, or seals to properly replace the product; Crimp fitting connection; Application specific design

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$243.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$25.99

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

from

$19.29

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$58.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$28.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$228.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$19.99

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$38.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$129.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$28.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$19.29

This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$99.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$60.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$16.29

This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.82

Santech Industries is a global supplier of OE quality automotive air conditioning components and A/C service kits to the aftermarket.

Product Features:

Type: Pressure
Color: Black
Fitting: M12-1.5 Female
Normal: Open
Closed: 44 PSI
Open: 24 PSI
OEM: F3AH-19E561AA

from

$302.99

New Standard Replacement A/C Compressor, FS10, 6 Groove, V8 Engine

Product Features:

FS10, 6 Groove, V8 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$153.99

A/C CLUTCH NEW

from

$77.99

Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$68.99

BEARING

from

$63.99

New Standard Replacement A/C Refrigerant Discharge Hose

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$50.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$41.99

from

$41.03

When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$26.89

The Denso A/C orifice Tube is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$20.99

New Standard Replacement A/C System Seal Kit, MT2524, L4 Engine

Product Features:

MT2524, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.34

A/C O-Ring Kit

from

$16.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$10.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$8.59

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

Most Sold 1995 Lincoln Mark VIII HVAC Electrical Parts

Explore our best-selling Lincoln parts for the 1995 Mark VIII among 1 OEM and aftermarket options starting from $30.99.

show more show less

from

$30.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

Top-Rated Cooling and Climate Controls Brands For Your 1995 Lincoln Mark VIII

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1995 Lincoln Mark VIIIs. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 1995 Mark VIII start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1995 Lincoln Mark VIII Cooling and Climate Controls

When it comes to maintaining or upgrading your 1995 Lincoln Mark VIII, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1995 Lincoln Mark VIII. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular FELPRO 1995 Lincoln Mark VIII Cooling and Climate Controls

FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1995 Lincoln Mark VIII owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 1995 Mark VIII, Advance Auto Parts carries a full inventory of 3 FELPRO Cooling and Climate Controls. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range from $6.79 to $9.99, plus, with more than 122 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$6.79

(11)

Engine Water Pump Gasket

“Perfect fit !”

from
$9.99

(110)

Multi-Purpose O-Ring

“Seals up well”

from
$6.79

(1)

WATER PUMP GASKET SET

“It was just what I needed”

FAQs for 1995 Lincoln Mark VIII Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1995 Lincoln Mark VIIIs?

Out of 98 Cooling and Climate Controls that fit 1995 Lincoln Mark VIIIs, the following parts are the top sellers:

Multi-Purpose O-Ring (5180902) – $9.99
Chrysler, Ford, GM Panel Retainer, Pack of 3 (11911131) – $4.49
Cap & Valve A/C System Seal Kit (15890310) – $17.99

What’s the price range for 1995 Lincoln Mark VIII Cooling and Climate Controls?

Cooling and Climate Control prices for the 1995 Lincoln Mark VIII start at $0.99 and go up to $367.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1995 Lincoln Mark VIII?

The average price for Cooling and Climate Controls for the 1995 Lincoln Mark VIII is $57.00. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Lincoln Mark VIII model years?

Yes, we currently carry Cooling and Climate Controls for 5 model years of Lincoln Mark VIIIs between 1993 and 1998. Cooling and Climate Controls are bought most frequently for the following model years: 1998, 1997, 1996, 1994, and 1993.

What are the cheapest Cooling and Climate Controls for my 1995 Lincoln Mark VIII?

The cheapest 1995 Lincoln Mark VIII Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (18890254) – $0.99
Water Pipe O-Ring (11856356) – $1.44
Green Round O-Ring (18890169) – $1.99
Chrysler, Ford, GM Panel Retainer, Pack of 3 (11911131) – $4.49
Thermostat O-Ring (11868422) – $4.55

What are the top-rated Cooling and Climate Controls that fit the 1995 Lincoln Mark VIII?

Out of 1,902 reviews by customers, our 1995 Lincoln Mark VIII Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1995 Lincoln Mark VIII and their top-rated products:

Blower Motor and Related Products
- Blower Motor: Without Wheel (3911632) – $50.99
Engine Cooling Parts
- Blower Motor: Without Wheel (3911632) – $50.99

What types of Cooling and Climate Controls do you sell for my 1995 Lincoln Mark VIII?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1995 Lincoln Mark VIII:

Can I get help with 1995 Lincoln Mark VIII Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Cooling and Climate Controls and more.

What is your return policy for Lincoln Mark VIII Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Lincoln Mark VIII Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Lincoln Mark VIII Cooling and Climate Controls

Carquest Premium – Heater Core (Part No.398308)

Felpro – WATER PUMP GASKET SET (Part No.ES 73048)

Carquest – A/C and Heater Relay (Part No.R3177)

KAI – Radiator (Part No.RAD1551)

KAI – A/C Compressor; Fs10; 6 Groove; V8 Engine (Part No.ACP010012)

National – Bearings (Part No.5000-KFF)

Factory Air – System Mounted Pressure Transducer (Part No.20990)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1438)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26719)

Motorcraft – Water Pump (Part No.G3000306205MTR)

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA1524)

Santech – MT0202 Clutch Cycling Pressure Switch (Part No.R10512577142SII)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1226)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – AC Pressure Sensor (Part No.ABA1012)

KAI – A/C Discharge Hose (Part No.HOS010373)

Stant – Thermostat O-Ring (Part No.G4030195862STN)

Carquest Premium – Connector (Part No.PTA1198)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Felpro – Multi-Purpose O-Ring (Part No.35489)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – Blower Motor: Without Wheel (Part No.35348)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10238)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

Santech – A/C O-Ring Kit (Part No.R1151317279SII)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36494)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Felpro – WATER PUMP GASKET SET (Part No.ES 73048)

Carquest Premium – Standard Thermostat: 187 Degrees (Part No.14089)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Felpro – Multi-Purpose O-Ring (Part No.35489)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54208)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432344)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10238)

Felpro – Engine Water Pump Gasket (Part No.35478)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Dorman – Help – Radiator Drain Cocks (Part No.61127)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4206)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Multi Purpose Relay (Part No.FCA1004)

Motorcraft – Water Pump (Part No.G3000306205MTR)

Motorcraft – Original Equipment (O.E.) Sender Assembly – Temperature (Part No.SW-2328)

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1094)

Carquest Premium – Connector (Part No.PTA1198)

FAE – Engine Coolant Temperature Sensor (Part No.C6020398419FAE)

Motorcraft – ENGINE WATER PUMP (Part No.PW-423)

Carquest Premium – Engine Cooling Fan Motor Connector (Part No.PTC1303)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10001)

Carquest Premium – Hazard Warning Flasher (Part No.FCA1011)

Walker Products – Water Temperature Se (Part No.P4036648489WKR)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12029)

Flex A Lite – Black Magic Electric Fan (Part No.180)

Flex A Lite – Black Magic Electric Fan (Part No.160)

KAI – Radiator (Part No.RAD1551)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

GMB – Water Pump (Part No.G3000306205GMB)

Motorcraft – Water Temperature Senders (Part No.P4036648489MTR)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Motorcraft – Motorcraft Thermostat (Part No.G4000319741MTR)

Autopart International Inc – Thermostat (Part No.G40002022080API)

Motorcraft – Original Equipment Radiator Cap (Part No.G1010415176MTR)

Motorcraft – RADIATOR CAP (Part No.RS-527)

Autopart International Inc – Water Temperature Se (Part No.P40362043014API)

Carquest Premium – ENG COOL TEMP SENDER (Part No.WTC1018)

Motorcraft – Thermostat O-Ring (Part No.G4030195862MTR)

Stant – Thermostat O-Ring (Part No.G4030195862STN)

Mahle – Water Pipe O-Ring (Part No.G2026948678MAH)

Carquest Premium – Blower Motor: Without Wheel (Part No.35348)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1226)

Dorman – Blower Motor Resistor Kit With Harness (Part No.973-062)

Factory Air – System Mounted Pressure Transducer (Part No.20990)

Carquest Premium – Heater Core (Part No.398308)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)