1995 Dodge Dakota Transmission Parts

Below you will find various in-demand Dodge Transmission Parts, components and accessories for your 1995 Dakota. Advance Auto Parts has popular Dakota parts like Transmission Seals, Transmission Bearings, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Dakota model years including 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 and more. Select a category of 1995 Dodge Dakota Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1995 Dodge Dakota Transmission Parts Categories

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

Automatic Transmission Governor Solenoids

OE Transmission Coolers

Transfer Shaft Bearing

Manual Transmission Differential Bearings

Gear Shift Rod Bushings

Transmission Solenoids

Transmission Oil Cooler Lines

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Output Shaft Speed Sensor Connectors

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Main Shaft Bearings

Automatic Transmission Line Assemblies

Automatic Transmission Oil Pump Seals

Pinion Seals

Transmission Seals and O-rings

Back Up Light Switch Connectors

Manual Transmission Bearing and Seal Overhaul Kits

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic and Manual Transmission Shift Boots

Shaft Seals

Miscellaneous Automatic Transmission Seals

Transmission Bands

Automatic Transmission Selector Shaft Seals

Shift Shaft Seals

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Fluid Filler Tube Seals

Automatic Transmission Speedometer Pinion Seals

Automatic Transmission Seals

Remanufactured Automatic Transmissions

Manual Transmission Cluster Gears

Transmission Crossmember Brackets

Essential Transmission Parts for 1995 Dodge Dakotas

from

$37.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$11.99

AT SHF LINK BUSHING

from

$3.19

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$50.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$41.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$31.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.49

Product Features:

Brand may vary by location

from

$17.99

This transmission shift boot matches the fit and function of the original equipment boot that as become damaged or missing. Made of quality materials, this boot is designed for durability and has been validated for a proper fit.

Product Features:

Ideal replacement – this transmission shift boot matches the fit and function of the original equipment boot for specific makes and models
Durable materials – this shift boot is manufactured from quality materials for durability
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$24.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.59

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$304.99

Product Features:

Use This Transmission Adapter with Crossmember (Available Separately)
Mount the Gen III Hemi in your 1972-1993 Dodge D100/D150 2WD Truck, or 1987-2004 Dodge Dakota 2WD Truck
Use w/ Gen III Hemi Engines 2003 & Up 5.7L/6.1L/6.2L/6.4L & TR-6060 Transmission
Black Coating for Durability and Corrosion Resistance
Optimal Engine & Transmission Location Eliminates the Need for Modifications to Firewall & Brake Booster
Eliminate the Installation Guesswork & Compatibility Uncertainty that Comes with Using Universal/Adjustable Crossmembers
Fully Engineered Swap System that Provides Optimized Component Clearances & Drivetrain / U-Joint Operation Angles When Used w/ Engine Mounting Brackets, and Exhaust Systems
Steel Construction – Light Weight Rigid Design with a Clean Appearance
Provides Clearance for up to 3″ Exhaust System
Includes TR-6060 Transmission Adapter with Hardware

from

$17.99

AT OIL PUMP GASKET

from

$2045.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$26.99

Anchor 2992 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2004
Weight approx: 2 Lbs

from

$36.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$173.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Meets or exceeds OE specifications

from

$14.99

AT OIL PAN GASKET

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$138.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Finish The Look Of Your Vehicle With RT Off-Road Fuel Door
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$42.99

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$4.29

AT SEAL

Upgrade your 1995 Dodge Dakota with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1995 Dodge Dakota, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Transmission Parts are key to keeping your Dakota functioning at its best. At Advance Auto Parts, we offer a wide selection of 119 Transmission Parts for the 1995 Dodge Dakota, designed to meet your needs without breaking the bank. From Transmission Seal replacements to Transmission Bearings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1995 Dodge Dakota at great prices. Our Transmission Parts inventory for this model ranges from just $3.19 to $1,819.99, with an average price of $80.08. Our 119 Transmission Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 1995 Dodge Dakota without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Dodge Dakota, we stock popular OEM and aftermarket Transmission Parts from top names like National, Driveworks, Imperial, and more. National Transmission Parts start at just $11.99 and boast an impressive 4.3 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Transmission Parts available starting at $10.99, and at an average 4.2 stars rating. With 2,010 customer reviews and counting, our 1995 Dodge Dakota Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Dodge Dakota is always ready to roll. We’re committed to providing you with everything you need to keep your Dakota in top shape, all in one place. Start shopping confidently below for your 1995 Dodge Dakota!

Best-Selling Transmission Seals for 1995 Dodge Dakotas

Enhance the driving experience in your Dodge with 26 quality Transmission Seal components, starting at $3.19.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$22.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$19.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.59

AT SEL SHAFT SEAL

from

$10.29

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.19

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$14.49

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.79

AT TORQUE CONVT SEAL

from

$17.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.29

AT EXT HOUSING SEAL

from

$4.29

AT SEAL

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.29

AT OIL PUMP SEAL

from

$19.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$273.99

ManTransBrg-SealKit

from

$12.29

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$188.99

ManTransBrg-SealKit

from

$9.59

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Popular 1995 Dodge Dakota Transmission Bearings

Customize your Dodge with 17 Transmission Bearings products like Countershaft Bearings, Automatic Transmission Differential Bearings, and Pinion Bearings, all priced under $43.99.

show more show less

from

$11.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.99

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$32.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.99

Product Features:

Brand may vary by location

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$43.99

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$35.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$13.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.99

Product Features:

PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Top Picks for 1995 Dodge Dakota Transmission Mounts

Upgrade Dodge Dakotas with top-quality Transmission Mounts parts, including 8 OEM and aftermarket selections for your 1995 model.

show more show less

from

$19.99

Anchor 2624 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1981-2004
Weight approx: 2 Lbs
Complete Mount

from

$54.99

Anchor 2858 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1984-2004
Weight approx: 3 Lbs
4 Hole Mount
Hole Center: 4.7 Inch / 119 Mm
Hole Side: 2.2 Inch / 56 Mm
4 Stud Design
Stud: M8-1.25

from

$8.79

Anchor 2667 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1971-1996
Weight approx: 1 Lbs
Part Group: 2667, 2667, 2668, 2668
1 Of Each Required Per Side

from

$12.99

Anchor 2668 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1971-1996
Weight approx: 1 Lbs
Part Group: 2667, 2667, 2668, 2668
1 Of Each Required Per Side

from

$13.99

Anchor 2570 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1984-2004
Weight approx: 3 Lbs
2 Hole Mount
Hole Center: 6.22 Inch / 158 Mm
4 Stud Design
Stud: M8-1.25

from

$25.99

Anchor 2954 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-1996
Weight approx: 3 Lbs

from

$53.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

from

$48.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

In-Demand Transmission Cooler and Parts for 1995 Dodge Dakotas

Select from 17 premium Transmission Cooler and Parts parts for your 1995 Dodge Dakota, with prices ranging from $11.99 to $85.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$82.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$79.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$31.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Most Sold 1995 Dodge Dakota Automatic Transmission Parts

Explore our best-selling Dodge parts for the 1995 Dakota among 15 OEM and aftermarket options starting from $4.29.

show more show less

from

$4.29

AT SOLENOID SEAL

from

$143.99

AT Governor Solenoid

from

$11.99

AT SHF LINK BUSHING

from

$54.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$44.99

AUTO TRANS BAND

from

$57.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$132.99

AT CONTR SOLENOID

from

$64.99

AUTO TRANS BAND

from

$123.99

AT CONTR SOLENOID

from

$1819.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$1819.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$1819.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$1819.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$125.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$87.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Top-Rated Transmission Parts Brands For Your 1995 Dodge Dakota

Shop for the best-rated brands offering Transmission Parts and other products for your 1995 Dodge Dakotas. Below you’ll find some of our best rated Transmission Parts from National, Driveworks, and Imperial, and more. Transmission Parts from these brands that fit a 1995 Dakota start at just $10.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1995 Dodge Dakota Transmission Parts

When it comes to maintaining or upgrading your 1995 Dodge Dakota, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1995 Dodge Dakota. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $15.92. Plus, with over 10 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(1)

Multi-Purpose Seal

“Bought 2 of these seals, 710058, as I have 2 Jeep TJ’s that are having the same leak. Apparently, getting the fluid too hot causes these seals to giv”

from $17.79

(3)

Multi Purpose Seal

“Installed easy and functions as expected”

from $11.99

(6)

Multi-Purpose Bearing

“Thanks”

Popular Driveworks 1995 Dodge Dakota Transmission Parts

Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 1995 Dodge Dakota owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1995 Dakota, Advance Auto Parts carries a full inventory of 3 Driveworks Transmission Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Driveworks Transmission Parts range from $10.99 to $11.49, plus, with more than 128 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $11.49

(33)

Taper Bearing Set

“Nice folks !!!!!”

from $11.49

(87)

Oil Seal

“Satisfied”

from $10.99

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

FAQs for 1995 Dodge Dakota Transmission Parts

Which Transmission Parts are best-sellers for 1995 Dodge Dakotas?

Out of 119 Transmission Parts that fit 1995 Dodge Dakotas, the following parts are the top sellers:

Mounting Kit System (6014844) – $11.99
Taper Bearing Set (5050626) – $11.49
Tapered Cone/Cup Wheel Bearing Set (5050723) – $26.99

What’s the price range for 1995 Dodge Dakota Transmission Parts?

Transmission Part prices for the 1995 Dodge Dakota start at $3.19 and go up to $1,819.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1995 Dodge Dakota?

The average price for Transmission Parts for the 1995 Dodge Dakota is $80.08. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Dodge Dakota model years?

Yes, we currently carry Transmission Parts for 22 model years of Dodge Dakotas between 1987 and 2010. Transmission Parts are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, and 2002.

What are the cheapest Transmission Parts for my 1995 Dodge Dakota?

The cheapest 1995 Dodge Dakota Transmission Parts we carry in stock are:

Automatic Transmission Speedometer Pinion Seal (11236107) – $3.19
Auto Transmission Manual Shaft Seal (11494000) – $3.99
AT SOLENOID SEAL (11239035) – $4.29
AT SEAL (11236293) – $4.29
ManTransOtptShftSeal (12008328) – $4.99

What are the top-rated Transmission Parts that fit the 1995 Dodge Dakota?

Out of 2,010 reviews by customers, our 1995 Dodge Dakota Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1995 Dodge Dakota and their top-rated products:

Back Up Neutral Safety Parts
- Back Up Light Switch (20975805) – $17.99
Automatic Transmission Pan and Gaskets
- Back Up Light Switch (20975805) – $17.99
Transmission Connectors
- Back Up Light Switch (20975805) – $17.99

What types of Transmission Parts do you sell for my 1995 Dodge Dakota?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 1995 Dodge Dakota:

Can I get help with 1995 Dodge Dakota Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Transmission Parts and more.

What is your return policy for Dodge Dakota Transmission Parts?

Advance Auto Parts keeps returns simple. For new Dodge Dakota Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Dodge Dakota Transmission Parts

Carquest Premium – Multi-Use Connector (Part No.PTA1148)

ATP – AT SHF LINK BUSHING (Part No.TO-41)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

Carquest Premium – ABS sensor (Part No.ARC1008)

National – Multi-Purpose Bearing (Part No.208)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-808)

Driveworks – Auto Transmission Oil Pump Seal (Part No.S-710557)

Dorman – Transmission Shift Tower Boot (Part No.926-131)

National – Tapered Roller Bearing Cone (Part No.JLM704649)

Schaeffler – Shaft Seal (Part No.SS2723)

Hooker BlackHeart – Hooker BlackHeart Transmission Crossmember Adapter Bracket – TR6060 Transmission (Part No.BHS528)

ATP – AT OIL PUMP GASKET (Part No.TG-11)

Moveras – M00919 Remanufactured 42RLE Automatic Transmission Assembly (Part No.M00919)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2992)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-397)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR94)

ATP – AT OIL PAN GASKET (Part No.TG-8)

Driveworks – Oil Seal (Part No.S-7300S)

Crown Auto Jeep Replacmnt – 42Rle Transmission, With Rtv Sealant/ Filter (Part No.52852912K)

National – Bearing (Part No.M86649)

Dorman – Transmission Output Speed Sensor (Part No.917-670)

Schaeffler – Cup (Part No.M802011)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

ATP – AT SEAL (Part No.TO-34)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.7300S)

National – Multi-Purpose Seal (Part No.710058)

National – Multi-Purpose Seal (Part No.4528N)

National – Multi-Purpose Seal (Part No.4333N)

Driveworks – Oil Seal (Part No.S-331228H)

National – Multi Purpose Seal (Part No.8609)

National – Multi-Purpose Seal (Part No.331227H)

National – Multi Purpose Seal: Single Lip, 50mm Inner Diameter, 65.33 mm Outer Diameter (Part No.1209)

ATP – AT SEL SHAFT SEAL (Part No.TO-15)

National – Multi-Purpose Seal (Part No.710597)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

National – Multi-Purpose Seal (Part No.4529N)

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

National – Multi-Purpose Seal (Part No.2506)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

ATP – AT SEAL (Part No.TO-34)

National – Multi-Purpose Seal (Part No.2465)

ATP – AT OIL PUMP SEAL (Part No.TO-8)

National – Manual Transmission Output Shaft Seal (Part No.710198)

USA Standard Gear – ManTransBrg-SealKit (Part No.72662)

Motive Gear – Differential Pinion Seal (Part No.8516N)

USA Standard Gear – ManTransBrg-SealKit (Part No.70680)

Schaeffler – Shaft Seal (Part No.SS2723)

National – Multi-Purpose Bearing (Part No.A-16)

Driveworks – Taper Bearing Set (Part No.S-A-18)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Set (Part No.S-A-36)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

Driveworks – Taper Bearing Set (Part No.S-A-16)

National – Multi-Purpose Bearing (Part No.207)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

National – Bearing (Part No.JL69349)

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67147)

Schaeffler – Tapered Roller Bearing (Part No.KT63)

Schaeffler – Cone (Part No.KLM603049)

Schaeffler – Cup (Part No.M802011)

Schaeffler – Bearing Cone (Part No.KLM12749)

National – Bearing Race (Part No.JL69310)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2624)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2858)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2667)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2668)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2570)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2954)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Red (Part No.71223030HKR)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Black (Part No.71223029HKR)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)