1995 Chevrolet C1500 Truck Beds

Essential 1995 Chevrolet C1500 Truck Beds

Westin – Bedcaps (Part No.72-41101)

Bedcaps

from

$103.99
Westin Bed Caps, constructed with high-impact ABS, give your vehicle a finished factory look while protecting your bed railing from the elements. Product installs quickly and easily with sturdy 3M tape. Available with or without stake pocket in black finish.

Product Features:
  • Protects bed railing against damage
  • Gives vehicle a finished factory look
  • Installs quickly and easily with 3M tape
  • Matching Tail Cap / Front Cap available
  • Will work with tonneau covers, camper shells and tie-downs if properly installed
  • Available in Smooth or Ribbed style
  • Available with or without stake pocket holes
  • Made in the USA
See More

CARR – Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum (Part No.124032)

Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum

from

$268.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That would not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
  • Limited Lifetime Warranty
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum (Part No.103992)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum

from

$141.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124031)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum

from

$268.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

Extang – Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl (Part No.92540)

Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl

from

$517.99
The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:
  • Lockable Via Tailgate Lock
  • Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
  • Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
  • EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
  • Clamping System Attaches To Your Truck In Seconds For Easy Installation
  • Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
  • Easy To Use Folding Design With Smooth Sleek Looks
See More

Extang – Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl (Part No.92545)

Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl

from

$499.99
The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:
  • Lockable Via Tailgate Lock
  • Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
  • Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
  • EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
  • Clamping System Attaches To Your Truck In Seconds For Easy Installation
  • Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
  • Easy To Use Folding Design With Smooth Sleek Looks
See More

Tonno Pro – Tri-Fold Soft Tonneau Cover (Part No.42-106)

Tri-Fold Soft Tonneau Cover

from

$357.99
The Tonno Pro TonnoFold Tri-Folding Tonneau Cover has become the fastest growing cover in its class. And for good reason. The hinged together sections make it easy to fold it into a more company unit. You can remove it in seconds when you have oversized cargo or simply fold it forward to lock in place for smaller loads. Our Tri-Fold tonneau cover comes completely assembled – NO DRILLING. This makes installation of your truck topper a snap. Our Tonno Pro Tri-Fold cover is unmatched in quality. It features tear-resistant double sided vinyl, and a 6063 grade powder coated frame. Not only does the Tonno Pro tri-fold provide you the protection and functionality you need, but it does it with our Low Profile Styling that will look great on any truck. Plus it can save you gas and keep your truck looking great for years to come.

Product Features:
  • Dual Coated Vinyl
  • Won’t Rot Or Mildew
  • Water Tite Seals/Carwash Friendly
  • No Drill/Easy Installation
  • Theft Deterrent
  • No Access with Tailgate Lock
  • Includes Sure Seal Tailgate Seal, Torch LED Bed Light, Pro Clean 10 oz Spray Vinyl Cleaner, and PVC Truck Work Gloves
See More

TrailFX – Round Tube Louver, Without Rear Cab Window Cut Out, Powder Coated, Black, Steel (Part No.H0004B)

Round Tube Louver, Without Rear Cab Window Cut Out, Powder Coated, Black, Steel

from

$385.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:
  • Round Tube Louvered Design With Space For The Cab Sliding Rear Window
  • Exclusive Design
  • Protects The Cab From Cargo That May Shift In The Truck Bed
  • Protective Bars Also Function As Convenient Tie Down Point To Brace Or Secure Heavy Cargo
See More

TrailFX – Round Tube Louver, Without Rear Cab Window Cut Out, Powder Coated, White, Steel (Part No.H0004W)

Round Tube Louver, Without Rear Cab Window Cut Out, Powder Coated, White, Steel

from

$304.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:
  • Round Tube Louvered Design With Space For The Cab Sliding Rear Window
  • Exclusive Design
  • Protects The Cab From Cargo That May Shift In The Truck Bed
  • Protective Bars Also Function As Convenient Tie Down Point To Brace Or Secure Heavy Cargo
See More

Westin – HD Headache Rack (Part No.57-8025)

HD Headache Rack

from

$545.99
HDX Commercial Grade Headache Rack protects your rear window from potential damage from shifting cargo. Welded tie-off hooks for securing your load are standard on all applications. Angled louvers keep sunlight out the cab cool and prevent UV damage to your interior all while allowing unobstructed visibility. 4 mount tabs give you the option of adding safety lights or accessories. Accommodates all major brand tool boxes. 2 diameter round top tube makes it easy to slide ladders

Product Features:
  • Provides The Protection Heavy Trucks Require
  • 1 Piece Welded Construction
  • Full Louvered Window Protection
  • Includes Rope Tie Off Hooks
  • Has Opening For Rear Light
  • Contoured Body Frame
  • Mounts For Light Tabs
See More

KAI – Truck Cab Extension (Part No.RRP1291)

Truck Cab Extension

from

$49.99
New Standard Replacement Driver Side Outer Extension Cab Corner, 27 1/2 X 17 1/2

Product Features:
  • 27 1/2 X 17 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Extension (Part No.LKQ1057700)

Truck Cab Extension

from

$33.99
New Standard Replacement Driver Or Passenger Side Cab Corner Extension

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Extension (Part No.RRP1292)

Truck Cab Extension

from

$49.99
New Standard Replacement Passenger Side Outer Extension Cab Corner, 27 1/2 X 17 1/2

Product Features:
  • 27 1/2 X 17 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP129)

Truck Cab Corner

from

$15.99
New Standard Replacement Driver Side Cab Corner, 21 X 7 X 1

Product Features:
  • 21 X 7 X 1, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP128)

Truck Cab Corner

from

$15.99
New Standard Replacement Passenger Side Cab Corner, 21 X 7 X 1

Product Features:
  • 21 X 7 X 1, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP1299)

Truck Cab Corner

from

$129.99
New Standard Replacement Driver Side Cab Corner Inner, 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2

Product Features:
  • 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – DogBx (Part No.DZ91782)

DogBx

from

$309.99
DogBx

Covercraft – Cab Forward Truck Covers (Part No.C10649TF)

Cab Forward Truck Covers

from

$481.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. A favorite amongst car enthusiasts, the Tan Flannel car cover provides superior indoor protection from dust, dirt and door dings. 50% heavier than Polycotton fabrics, these covers are long wearing, water resistant and breathable. Protects your vehicle from water and moisture, rotting and mildew. Constructed from woven a durable Polycotton blend. Tan Flannel is the best heavy weight indoor truck cab forward cover.

Product Features:
  • Custom Protection for Front Half of Pickup
  • Great for Use with a Camper
  • Protects Interior From UV & Reduces Heat Build-up
  • Easy to Use
  • Cab Forward Covers Available in Multiple Fabrics
See More

Covercraft – Cab Forward Truck Cover (Part No.C13897HG)

Cab Forward Truck Cover

from

$843.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. As the most heavy duty cover material on the market, the WeatherShield HD is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD is constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:
  • Custom Protection for Front Half of Pickup
  • Great for Use with a Camper
  • Protects Interior From UV & Reduces Heat Build-up
  • Easy to Use
  • Cab Forward Covers Available in Multiple Fabrics
See More

Covercraft – Cab Forward Truck Covers (Part No.C13897TF)

Cab Forward Truck Covers

from

$582.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. A favorite amongst car enthusiasts, the Tan Flannel car cover provides superior indoor protection from dust, dirt and door dings. 50% heavier than Polycotton fabrics, these covers are long wearing, water resistant and breathable. Protects your vehicle from water and moisture, rotting and mildew. Constructed from woven a durable Polycotton blend. Tan Flannel is the best heavy weight indoor truck cab forward cover.

Product Features:
  • Custom Protection for Front Half of Pickup
  • Great for Use with a Camper
  • Protects Interior From UV & Reduces Heat Build-up
  • Easy to Use
  • Cab Forward Covers Available in Multiple Fabrics
See More

Covercraft – Cab Forward Truck Cover (Part No.C13897D4)

Cab Forward Truck Cover

from

$838.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:
  • Custom Protection for Front Half of Pickup
  • Great for Use with a Camper
  • Protects Interior From UV & Reduces Heat Build-up
  • Easy to Use
  • Cab Forward Covers Available in Multiple Fabrics
See More

Rampage – EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Extended Cab (Part No.1321)

EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Extended Cab

from

$133.99
Product Features:
  • Soft And Durable Diamond Bond Pattern
  • Unique 4-Layer Breathable Material
  • Ultraviolet Protection Against Sun And Heat
  • Polypropylene Layers Repel Water
  • Side Grommets For Tie Downs
  • Includes Free Locking Cable And Storage Bag
  • Indoor And Outdoor Usage
See More

Dorman – Pick Up Bed Crossmember Kit (Part No.926-982)

Pick Up Bed Crossmember Kit

from

$466.99
When a truck bed crossmember rusts, the only option has been to replace the entire bed. This kit allows replacement of only the failed floor supports to reduce repair costs.

Product Features:
  • Saves money – this truck bed floor support repair kit allows you to replace only damaged crossmembers, not the entire bed
  • Complete repair – includes 4 bed crossmembers painted in weldable primer and mounting hardware
  • Application specific – made to match the dimensions and material for certain Chevrolet and GMC pick-up trucks
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

KAI – Floor Support (Part No.LKQ1057745)

Floor Support

from

$64.99
New Standard Replacement Bed Floor Support

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

1995 Chevrolet C1500 Truck Beds

Maybe you’re in the middle of a full rebuild of that 1995 Chevrolet C1500. Maybe you just need a couple of Truck Beds. Either way, Advance Auto Parts has 51 different Truck Beds in our inventory ranging from $15.99 to $1,073.99. That means you can find the exact parts or products you need to keep that 1995 Chevrolet C1500 running smoothly.

Truck Beds are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Chevrolet C1500. ARIES, CARR, and Tonno Pro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Truck Beds for your 1995 Chevrolet C1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Truck Beds to keep your 1995 Chevrolet C1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Truck Beds Brands To Make Your 1995 Chevrolet C1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Chevrolet C1500 demands trusted brand parts and products to keep it running. Many trusted brands of Truck Beds make up Advance Auto Parts’ inventory, and all are ready to help make your C1500 the best it can be. Be sure to browse some of our top Truck Beds brands and parts.

FAQs for 1995 Chevrolet C1500 Truck Beds

What are the most purchased Truck Beds for the 1995 Chevrolet C1500?

Out of 51 Truck Beds for the 1995 Chevrolet C1500, the most popular in our inventory are:
Durable Truck Headache Rack: Protect Your Cab from Impact and Sun Damage
from $249.99
This product is not rated
Durable Truck Headache Rack: Protect Your Cab from Impact and Sun Damage
Truck Cab Protector and Headache Racks
Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum
from $268.99
This product is not rated
Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum
Truck Cap Side Steps
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
from $268.99
This product is not rated
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
Truck Cap Side Steps