1993 Toyota MR2 Fuel and Emissions Systems
More 1993 Toyota MR2 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1993 Toyota MR2, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1993 Toyota MR2 Fuel and Emissions Systems
Ishino – Fuel Inject Cushion Ring (Part No.C1011144317ISH)
from
$1.86
Fuel Inject Cushion Ring
Carquest Premium – Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10825)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Temperature Sensor (Part No.EGA1589)
from
$208.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
BSE Original – Air Flow Meter (Part No.28722)
from
$147.99
Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.
Product Features:
See More
Product Features:
- BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
- We use automated computerized test equipment to ensure functionality and reliability.
- All Mass Airflow sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
- All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.
Ishino – Stone Idle Control Valve Gasket (Part No.C4063182621ISH)
from
$3.19
Ishino Stone is an industry leading gasket manufacturer, providing you original equipment design and quality and world class aftermarket service.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Meets or exceeds OEM specifications
Carquest Premium – Fuel Injector Connector (Part No.PTA1064)
from
$4.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
AISIN – Original Equipment Multi-purpose Vacuum Switch, Toyota (Part No.VST-034)
from
$72.99
The parent company, AISIN Seiki Co. Ltd., was founded in 1965 as an OE manufacturer. AISIN provides superior products through engineering excellence, progressive technological development and dedication to service are some factors which have contributed to bringing AISIN to its position as a multi-award-winning global leader in automotive parts. Their intense focus on research and development is the commitment that enables their company to offer vital, leading edge technology to the automotive industry.
See More
Mark Automotive – Fuel Tank Cap Seal (Part No.E206089586MAM)
from
$24.84
Fuel Tank Cap Seal
Carquest – A/C Compressor Clutch Relay (Part No.R3130)
from
$40.99
Product Features:
See More
- Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
- A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
- Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
- The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
Dorman – Exhaust Gas Recirculation Modulator (Part No.911-609)
from
$47.99
This EGR vacuum modulator is designed to match the fit and function of the original modulator on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this EGR transducer is designed to match the fit and function of the original modulator on specified application
- Restores functionality – reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Idle Air Control Valve (Part No.ABC3737)
from
$211.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1414)
from
$45.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Victor Reinz – EGR Valve Gasket (Part No.71-15339-00)
from
$2.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4050)
from
$87.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – First Time Fit Oxygen Sensor (Part No.C5010100853ND)
from
$75.27
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
FAE – Intake Air Temperature Sensor (Part No.C6000271665FAE)
from
$33.99
The FAE Intake Air Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Delphi – Fuel Injection Pressure Regulator (Part No.FP10576)
from
$115.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
AISIN – Vacuum Valve (Part No.B2024928059ASC)
from
$131.50
Vacuum Valve
Nippon Reinz – Fuel Injector O-Ring (Part No.C1012266164NRZ)
from
$1.36
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Delphi – Fuel Pump Strainer (Part No.FS0075)
from
$31.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Filtration performance and micron rating meet or exceed OE requirements
- OE replacement strainer designed for use with Delphi electric fuel pumps
- Replacing the strainer is always recommended when replacing a fuel pump
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1584)
from
$185.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11974-01)
from
$7.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dorman – Help – Gasket For Oxygen Sensor (Part No.47021)
from
$12.29
This oxygen sensor gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this oxygen sensor gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Ishino – Fuel Inject Cushion Ring, Grommet (Part No.C1011189045ISH)
from
$2.20
Fuel Inject Cushion Ring, Grommet
Aisan – Fuel Cut Off Valve (Part No.E2015177515AIS)
from
$8.61
Fuel Cut Off Valve
MAHLE Original – Injector O-Rings (Part No.GS33654)
from
$7.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Popular 1993 Toyota MR2 Fuel and Emissions Systems Categories
1993 Toyota MR2 Fuel and Emissions Systems
You count on your 1993 Toyota MR2 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 59 Fuel and Emissions Systems ranging in price from $1.36 to $264.78, you’re sure to find everything you need for your 1993 Toyota MR2.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 20 different brands like Carquest Premium, Motorad, and Dorman. 1993 Toyota MR2 Fuel and Emissions Systems start as low as $1.36!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 138 extensive product reviews on 1993 Toyota MR2 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Exhaust Gas Recirculation Modulator with 4.5 stars and Oxygen Sensor: 2 Wire, 18.82" Long, Not Heated, Exact Fit with 3.7 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1993 Toyota MR2 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1993 Toyota MR2
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Toyota MR2 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Dorman, and even more.
Popular Carquest Fuel and Emissions Systems
You’ll find popular Carquest brand products across Fuel Injector Electrical Parts. All are waiting to get your 1993 Toyota MR2 back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1993 Toyota MR2, and some of our most reviewed Carquest Premium parts include:
from
$21.99
(16)
Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1993 Toyota MR2 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1993 Toyota MR2?
Out of 59 Fuel and Emissions Systems for the 1993 Toyota MR2, the most popular in our inventory are:
What are the top-rated 1993 Toyota MR2 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1993 Toyota MR2 based on customer reviews/ratings are:
from
$47.99
(4)
Exhaust Gas Recirculation Modulator
“Worked. Improved gas mileage. Cleared my egr code.”
