from

$93.99

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

High Flow For Increased Performance
Progressive 5 Layer Cotton Gauze Material
Deep Cotton Pleats for Increased Flow
Progressive Bump Seal For Leak-Free Seal

from

$149.99

K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

from

$4.79

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.49

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.49

This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.99

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
Provides maximum fuel system protection.
Designed to meet or exceed Original Equipment specifications
Protects the injectors from debris that cause damage and clogging.
Provides less restriction preventing the fuel pump from working too hard.
Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

from

$7.79

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
Provides maximum fuel system protection.
Designed to meet or exceed Original Equipment specifications
Protects the injectors from debris that cause damage and clogging.
Provides less restriction preventing the fuel pump from working too hard.
Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

from

$2.29

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.49

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

This PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles
Restores functionality – reliable replacement for an original elbow that is leaking or has failed due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

This PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles
Restores functionality – reliable replacement for an original elbow that is leaking or has failed due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.51

Motorcraft Breather Elements are designed, engineered and tested to meet durability and reliability under extreme conditions. They are built to maximize the performance are made from high-quality materials. They offer high resistance ensuring lasting durability.

Product Features:

Resists abrasion and corrosion
Maximizes performance
Made from high-quality materials
Easy installation
Ensures lasting durability

from

$5.49

Crankcase Breather Filter

from

$27.99

Replacement original equipment transmission filters remove contaminants from the fluid, to help the transmission operate as designed. Motorcraft® Automatic Transmission Filters are designed, engineered and tested to help ensure peak transmission performance throughout the life of the filter. Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Company Filter bypass screen

Product Features:

Each original equipment filter meets the specific needs of its application and intended service life
Filtration efficiency is fine tuned to match each transmission’s fluid cleanliness requirements to help ensure transmission durability throughout the intended life cycle
Original equipment Filters are engineered to maintain fluid flow rates even as wear debris accumulates
Filter housings are constructed from advanced fiber reinforced temperature-resistant polymers or a combination of polymers and stamped steel
Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Co

from

$34.99

ACDelco Gold (Professional) Automatic Transmission Filters are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$15.49

Mobil 1 Extended Performance Oil Filters are built with strong, durable components and are tested and proven to protect 2X as long as auto manufacturers recommended oil change intervals. A high-efficiency synthetic blend media removes over 99% of harmful contaminants keeping oil cleaner, longer. Enhanced nitrile gasket remains pliable to help prevent oil leaks while a durable anti-drain back valve protects against dry starts. Durable, heavy-duty filter canister withstands 9X the normal vehicle oil system operating pressure. These are just some of the advanced technologies that go into making an oil filter that can provide proven protection for up to one full year or 20,000 miles. Meets requirements of the Mobil 1 annual protection limited warranty.

Product Features:

Protects for 20,000 Miles or up to 1 year – GUARANTEED
Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
Removes over 99% of contaminants – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
Strong, durable components for long lasting performance
Premium O-ring to help prevent leaks

from

$12.29

The Motorcraft Original Equipment Oil Filter is designed, engineered and recommended by Ford Motor Company. This filter helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.

Product Features:

Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$28.99

AUTO TRANS FLTR KT

from

$37.99

AT IN-LINE FLTR 3/8

from

$35.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$16.16

Every Motorcraft PCV Valve delivers the quality performance you have come to expect from Ford Motor Company products. Not only do they help keep harmful particles out of your vehicle system, but Motorcraft filters are also the only filters recommended for Ford and Lincoln vehicles.

Product Features:

Designed for each application – no consolidated part numbers
Help contain contaminants inside the filter
Recommended by Ford Motor Company

from

$87.96

Every Motorcraft PCV Valve delivers the quality performance you have come to expect from Ford Motor Company products. Not only do they help keep harmful particles out of your vehicle system, but Motorcraft filters are also the only filters recommended for Ford and Lincoln vehicles.

Product Features:

Designed for each application – no consolidated part numbers
Help contain contaminants inside the filter
Recommended by Ford Motor Company

from

$3.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$95.99

For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:

Remote mount filter kit
For use when relocation of the oil filter is necessary
Comes with all necessary hardware except hoses

1993 Ford E-250 Econoline Filters and PCVs

More 1993 Ford E-250 Econoline Filters and PCVs Categories

Essential 1993 Ford E-250 Econoline Filters and PCVs

aFe POWER – PRO 5R Air Filter: 98.6% Filtration Efficiency, 5 Layer Cotton, Oiled Filter, Track/Street Driving (Part No.10-10063)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1460)

Dorman – Pilot Point Engine Oil Drain Plug: 1/2 " -20, Unified National Coarse Thread, 9/16 " Head, 1 Pack (Part No.090-052CD)

Dorman – Help – Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack (Part No.69010)

Dorman – Help – PCV Valve Grommet – 0.684 In. ID – 1.395 In. OD – 0.389 In. Thickness (Part No.42066)

Carquest Premium – PCV Valve Grommet (Part No.PCA1286)

Carquest Premium – 5/16" Inlet-Outlet Metal In-Line Fuel Filter (Part No.86595)

Carquest Premium – 5/16" Inlet – 1/8"-27 Outlet In-Line Ford Fuel Filter (Part No.86049)

Dorman – Copper Oil Drain Plug Gasket (sold by each) (Part No.095-019)

Dorman – Rubber Drain Plug Gasket, Fits M14 (Part No.097-146.1)

Dorman – Help – PCV End Assembly (Part No.46017)

Dorman – Help – PCV Elbow (Part No.47032)

Motorcraft – Breather Element (Part No.A1140671361MTR)

Purolator – Crankcase Breather Filter (Part No.B43160)

Motorcraft – Automatic Transmission Filter: Original Equipment on Ford Motor Company Vehicles, 1 Pack (Part No.FT-105)

ACDelco – Automatic Transmission Fluid Filter Kit (Part No.TF302)

Mobil 1 – Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles (Part No.M1-210A)

Motorcraft – Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards (Part No.FL-784)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3001)

ATP – AUTO TRANS FLTR KT (Part No.IL-160)

ATP – AT IN-LINE FLTR 3/8 (Part No.JX-160)

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.96049)

Motorcraft – Motorcraft PCV Valve (Part No.B2040208184MTR)

Motorcraft – Motorcraft PCV Valve (Part No.B2040352423MTR)

Carquest Premium – PCV Valve (Part No.PCA1048)

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Popular 1993 Ford E-250 Econoline Filters and PCVs Categories

1993 Ford E-250 Econoline Filters and PCVs

Top-Rated Filters and PCVs Brands For Your 1993 Ford E-250 Econoline

Popular ACDelco Filters and PCVs

Top-Rated Purolator ONE Filters and PCVs

FAQs for 1993 Ford E-250 Econoline Filters and PCVs

What are the most purchased Filters and PCVs for the 1993 Ford E-250 Econoline?

What are the top-rated 1993 Ford E-250 Econoline Filters and PCVs?