1992 Subaru Legacy Belts and Hoses
Find Your Specific 1992 Subaru Legacy Belts and Hoses
Below you will find various in-demand Subaru Belts and Hoses, components and accessories for your 1992 Legacy. Advance Auto Parts has popular Legacy parts like Heater Hoses, Radiator Hoses, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Legacy model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1992 Subaru Legacy Belts and Hoses below and start saving instantly.
Popular 1992 Subaru Legacy Belts and Hoses Categories
Essential Belts and Hoses for 1992 Subaru Legacies
PowerStop – PowerStop Z17 Evolution Ceramic Brake Pads with Hardware, 17-470 (Part No.17-470)
from
$50.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K040353 (Part No.K040353)
from
$28.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K040332 (Part No.K040332)
from
$34.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 33.27 Long, 4 Rib Count, 5040333 (Part No.5040333)
from
$36.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length, 87802 (Part No.87802)
from
$43.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (Part No.87649)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – "Dayco Molded Heater Hose: EPDM Rubber, Direct Fit, 5/16"" Inside Diameter, 86807" (Part No.86807)
from
$8.49
“Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″” I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.”
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length, 80402 (Part No.80402)
from
$30.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Dorman – Dorman Coolant Pipe For Oil Cooler, 626-594 (Part No.626-594)
from
$44.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.
See More
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9"" Long, 1.47"" Diameter, B71752" (Part No.B71752)
from
$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12"" Long, 1.50"" Diameter, B70081" (Part No.B70081)
from
$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 21851 (Part No.21851)
from
$28.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9"" Long, 1.47"" Diameter, C72712" (Part No.C72712)
from
$14.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Heater Hose, 18453 (Part No.18453)
from
$25.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28410 (Part No.28410)
Dayco – Dayco Molded Heater Hose EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length, 86500 (Part No.86500)
from
$13.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Heater Hose, 19535 (Part No.19535)
from
$29.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (Part No.28412)
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5"" Long, 1.50"" Diameter, C72485" (Part No.C72485)
from
$37.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 20953 (Part No.20953)
from
$37.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5"" Long, 1.50"" Diameter, C72531" (Part No.C72531)
from
$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia., 81141 (Part No.81141)
from
$7.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25"" Long, 1.44"" Diameter, B71526" (Part No.B71526)
from
$42.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (Part No.28411)
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25"" Long, 1.06"" Diameter, B71153" (Part No.B71153)
from
$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 23460 (Part No.23460)
from
$40.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Upgrade your 1992 Subaru Legacy with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1992 Subaru Legacy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Belts and Hoses are key to keeping your Legacy functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Belts and Hoses for the 1992 Subaru Legacy, designed to meet your needs without breaking the bank.
From
Heater Hose
replacements to
Radiator Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1992 Subaru Legacy at great prices.
Our Belts and Hoses inventory for this model
ranges from just $2.99 to $59.99, with
an average price of $27.25.
Our 30 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 1992 Subaru Legacy without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Subaru Legacy, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco Driveworks, and more.
Dayco Belts and Hoses
start at just $27.99 and boast an impressive 4.5 stars average rating from customers.
With 452 customer reviews and counting, our 1992 Subaru Legacy Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1992 Subaru Legacy is always ready to roll. We’re committed to providing you with everything you need to keep your Legacy in top shape, all in one place.
Start shopping confidently below for your 1992 Subaru Legacy!
Best-Selling Heater Hoses for 1992 Subaru Legacies
Enhance the driving experience in your Subaru with 8 quality Heater Hose components, starting at $2.99.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length, 86800 (Part No.86800)
from
$39.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length, 86806 (Part No.86806)
from
$11.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (Part No.87649)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6"" Long, .63"" Diameter, A71147" (Part No.A71147)
from
$34.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Heater Hose, 18020 (Part No.18020)
from
$18.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Gates – Gates Premium Molded Heater Hose, 18206 (Part No.18206)
from
$22.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Dayco – "Dayco Molded Heater Hose: EPDM Rubber, Direct Fit, 5/16"" Inside Diameter, 86807" (Part No.86807)
from
$8.49
“Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1″” I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.”
See More
Most Popular 1992 Subaru Legacy Radiator Hoses
Customize your Subaru with 6 Radiator Hoses products
like Coolant Hoses and
By-Pass Hoses, all
priced under $28.49.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12"" Long, 1.50"" Diameter, B70081" (Part No.B70081)
from
$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 5 1/2 Inch Length, 87842 (Part No.87842)
from
$28.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 3 Inch Length, 87964 (Part No.87964)
from
$8.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9"" Long, 1.47"" Diameter, C72712" (Part No.C72712)
from
$14.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 21851 (Part No.21851)
from
$28.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Heater Hose, 18791 (Part No.18791)
from
$18.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Top Picks for 1992 Subaru Legacy Engine Cooling Hoses
Upgrade Subaru Legacies with top-quality Engine Cooling Hoses parts, including 5 OEM and aftermarket selections for your 1992 model.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25"" Long, 1.44"" Diameter, B71526" (Part No.B71526)
from
$42.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia., 81141 (Part No.81141)
from
$7.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 10.75 Inch Long, 1.5 Inch Inner Dia., 81131 (Part No.81131)
from
$29.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25474 (Part No.25474)
from
$28.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (Part No.28412)
In-Demand Serpentine and V Belts for 1992 Subaru Legacies
Select from 9 premium Serpentine and V Belts parts for your 1992 Subaru Legacy, with prices ranging from $17.99 to $50.99.
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 35.04 Long, 4 Rib Count, 350K4 (Part No.350K4)
from
$27.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 34.5 Long, 5 Rib Count, 5050345 (Part No.5050345)
from
$27.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 34.5 Long, 5 Rib Count, 345K5 (Part No.345K5)
from
$17.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 35.04 Long, 4 Rib Count, 5040350 (Part No.5040350)
from
$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
PowerStop – PowerStop Z17 Evolution Ceramic Brake Pads with Hardware, 17-470 (Part No.17-470)
from
$50.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K040350 (Part No.K040350)
from
$40.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K050345 (Part No.K050345)
from
$29.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Carquest Standard – "Carquest Serpentine Belt: 35.0"" Long, 4 Rib Count, 350K4" (Part No.350K4)
from
$27.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Carquest Standard – "Carquest Serpentine Belt: 34.5"" Long, 5 Rib Count, 345K5" (Part No.345K5)
from
$17.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Most Sold 1992 Subaru Legacy Oil Cooler Hoses
Explore our best-selling Subaru parts for the 1992 Legacy among 2 OEM and aftermarket options starting from $46.99.
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Top-Rated Belts and Hoses Brands For Your 1992 Subaru Legacy
Shop for the best-rated brands offering Belts and Hoses and other products for your 1992 Subaru Legacies. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 1992 Legacy start at just $17.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 1992 Subaru Legacy Belts and Hoses
When it comes to maintaining or upgrading your 1992 Subaru Legacy, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1992 Subaru Legacy. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99, with an average price of just $36.32. Plus, with over 68 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$42.99
(5)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25"" Long, 1.44"" Diameter, B71526"
“Perfect .”
from
$27.99
(47)
Dayco Poly Rib Belt Serpentine Belt 34.5 Long, 5 Rib Count, 5050345
“works great and fit perfectly – good price.”
from
$37.99
(16)
Dayco Poly Rib Belt Serpentine Belt 35.04 Long, 4 Rib Count, 5040350
“was a perfect fit, good price”
Popular Driveworks 1992 Subaru Legacy Belts and Hoses
Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1992 Subaru Legacy owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1992 Legacy, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $17.99 to $27.99, plus, with more than 36 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$17.99
(16)
Driveworks Poly Rib Belt Serpentine Belt 34.5 Long, 5 Rib Count, 345K5
“Fits perfectly”
from
$27.99
(20)
Driveworks Poly Rib Belt Serpentine Belt 35.04 Long, 4 Rib Count, 350K4
“Belt broke on the highway, had to get towed to the side.”
FAQs for 1992 Subaru Legacy Belts and Hoses
Which Belts and Hoses are best-sellers for 1992 Subaru Legacies?
Out of 30 Belts and Hoses that fit 1992 Subaru Legacies, the following parts are the top sellers:
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Dayco Flex Radiator Hoses EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia., 81141 (5191033) – $7.99
- Dayco Molded Heater Hose EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length, 86800 (15590009) – $39.99
What’s the price range for 1992 Subaru Legacy Belts and Hoses?
Belts and Hose prices for the 1992 Subaru Legacy start at $2.99 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1992 Subaru Legacy?
The average price for Belts and Hoses for the 1992 Subaru Legacy is $27.25. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Subaru Legacy model years?
What are the cheapest Belts and Hoses for my 1992 Subaru Legacy?
The cheapest 1992 Subaru Legacy Belts and Hoses we carry in stock are:
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (10505007) – $4.99
- Dayco Flex Radiator Hoses EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia., 81141 (5191033) – $7.99
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 3 Inch Length, 87964 (11936691) – $8.29
- "Dayco Molded Heater Hose: EPDM Rubber, Direct Fit, 5/16"" Inside Diameter, 86807" (19590229) – $8.49
What are the top-rated Belts and Hoses that fit the 1992 Subaru Legacy?
Out of 452 reviews by customers, our 1992 Subaru Legacy Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1992 Subaru Legacy and their top-rated products:
- Radiator Hoses
- Engine Cooling Hoses
- Serpentine and V Belts
What types of Belts and Hoses do you sell for my 1992 Subaru Legacy?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 1992 Subaru Legacy:
Can I get help with 1992 Subaru Legacy Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Belts and Hoses and more.
What is your return policy for Subaru Legacy Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Subaru Legacy Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
