Subaru Legacy Parts

Subaru Legacy Body Parts

from

$36.99

New CAPA Certified Standard Replacement Front Upper Bumper Cover Support Bracket

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$629.99

New Economy Replacement Hood Panel, Also Fits Baja Without Turbo Only

Product Features:

Also Fits Baja Without Turbo Only, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

This trunk lock kit contains the needed components necessary to replace the truck lock assembly on the listed vehicle application.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$55.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$59.99

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$39.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership: This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$465.99

New CAPA Certified Premium Replacement Front Bumper Cover, Except Outback, Paint To Match

Product Features:

Excludes Outback, Paint To Match, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$101.99

New Standard Replacement Driver Side Fender

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$255.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified standard replacement front grille, matte-black with chrome molding, will not include emblem, sedan models with 2.5 Liter engine, excludes sport sedan models. It is designed to replace your existing front grille. Check to be sure it fits your vehicle.

Product Features:

Matte-Black With Chrome Molding, Will Not Include Emblem, Models With 2.5 Engines, Excludes Sport Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$60.99

New CAPA Certified Standard Replacement Front Bumper Impact Absorber

Product Features:

Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$94.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$111.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable and heated
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Black

from

$166.99

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$39.99

Application matched component to ensure the system can be returned to like new condition.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$137.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement passenger side power door mirror, with heated glass, turn signal and blind spot detection, manual folding, with black cover. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

Manual Folding, With Heated Glass, Turn Signal And Blind Spot Detection, With Black Cover
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$13.99

New Standard Replacement Passenger Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

New Standard Replacement Driver Side Fender Liner, Except Outback

Product Features:

Except Outback, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

COWL VENT PUSH RETNR

from

$50.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$157.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$737.99

New CAPA Certified Premium Replacement Hood Panel, Without Turbo And Without Hood Scoop

Product Features:

Without Turbo And Without Hood Scoop, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$18.99

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 3 7/8″ tall by 6 5/8″ wide and 6 15/16″ diagonally
This glass fits Mirrors with Manual function only
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$53.99

New Standard Replacement Driver Side Front Bumper Corner Support Bracket, Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.99

New Economy Replacement Passenger Side Outer Front Bumper Cover Bracket

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Subaru Legacy Transmission Parts

from

$74.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$42.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$11.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$33.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$31.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$72.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$29.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to SAAB 05-06; SUBA 99-22;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2022
Weight approx: 1 Lbs

from

$47.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Back Up Light Switch automatically activates the rear backup lights when the vehicle is shifted into reverse. This improved visibility for the driver and alerts other vehicles or pedestrians when the vehicle is reversing, reducing the risk of accidents. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$68.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$30.99

The Whiteline shifter bushing kit has been engineered to eliminate that sloppy, plush shifter feel found in the rubber OEM bushings. By drastically reducing the bushing compliance, improves the crispness of cross gate up and downshifts removing the potential of missed and poor shifts. Also incorporating a radius edged flanged bushing head reduces any potential of bushing grab or stiction on the mounting faces during the initial shifting moment allowing a bind free clean gear shift.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$4.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$13.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$23.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to SUBA 05-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2019
Weight approx: 2 Lbs

from

$281.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$3.79

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.49

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$31.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$9.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$21.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$38.99

AUTO TRANS BAND

Subaru Legacy Clutch Systems

from

$172.99

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$56.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$117.99

Meets Original Equipment Specifications & Quality.

Product Features:

Manufactured From Premium Grade Materials For Superior-Quality Friction Surface & Excellent Heat-Absorption Capacity.

from

$46.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$87.99

from

$111.99

from

$156.99

from

$18.49

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Returns clutch petal feel to normal
Allows proper clutch engagement

from

$439.99

Since 1994, Advanced Clutch Technology has specialized in delivering the highest performing driveline components in the industry. A laser-guided focus on customer service, quality and reliability has earned the company a coveted reputation across all segments of the performance aftermarket. Each product offering is thoroughly researched, engineered and tested to ensure it performs up to the challenge of customer expectations – with the goal of far exceeding them. This all-in commitment to excellence has resulted in the support of numerous victories and championships around the world. These same standards also ensure street products provide the solid performance relied upon day after day.

Product Features:

Noticeably improved engine response and acceleration, OE to mild gear rattle
Heat-treated forging for strength and toughness, induction-hardened ring gears for maximum life
One piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears
Recommended for street and race use
Forged, CNC machined and dynamically computer balanced for smooth high RPM reliability

from

$135.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$358.99

from

$144.99

from

$251.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$217.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$463.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$1155.99

Light to moderate pedal effort, smooth positive engagement, OE to mild gear rattle
Longer friction life, extended by ACT’s exclusive diaphragm design
Carefully engineered,Precisely assembled, accurately balanced, with premium organic friction materials for heat tolerance and reduced fade
Recommended for street and race use
100% clamp load tested and dynamically computer balanced for smooth high RPM reliability

from

$625.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$30.50

Engineered from high-quality materials to ensure chemical and thermal resistance, Tru-Torque’s Clutch Hydraulic Hose restores and maintains optimal clutch performance. New hose replacement is recommended as part of a complete clutch repair for your vehicle.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met

from

$15.99

Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
Brand may vary by location

from

$23.44

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met

from

$15.99

Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
Brand may vary by location

from

$20.99

Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
Brand may vary by location

Subaru Legacy Automotive Accessories

from

$28.99

New Standard Replacement Front Center Undercar Shield, With Automatic Transmission

Product Features:

With Automatic Transmission, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$109.99

The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

Capacity: 18 cu ft
Dimensions: 48″ L x 36″ W x 18″ H
Designed for SUVs and minivans, WITH or WITHOUT a roof rack
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$241.99

This keyless entry remote is designed to match the appearance and function of the original key fob on specified vehicles, providing a nearly identical replacement or spare transmitter. It requires programming with a compatible scan tool to be paired with a vehicle. Setup by a qualified and properly equipped professional is recommended.

Product Features:

Direct replacement – this keyless entry remote is designed to match the function of the original key fob on specified vehicles
Programming required – a compatible scan tool is required to properly pair this remote; setup by a qualified professional is recommended
Durable construction – made from quality materials and components to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$144.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision machined to perfectly fit your vehicle s window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$139.99

The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:

Capacity: 18 cu ft
Dimensions: 48″ L x 36″ W x 18″ H
Designed for SUVs and minivans, WITH or WITHOUT a roof rack
Designed for SUVs and minivans, WITH or WITHOUT a roof rack
Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$89.99

TechShade is a custom fit windshield and window sun shade that protects your vehicle s interior from harmful UV rays. Its clever design helps keep interior temperatures cool in the summer or flip it around and help prevent frost build up in the winter.

Product Features:

Dual Purpose Design Helps Keep Vehicles Cool In The Summer, And In The Winter Also Helps Warm Up Interiors And Avert Frost Build Up
Cools In Summer Significantly Reduces The Temperature Of Your Vehicle s Dashboard And Steering Wheel
Heats In Winter, Helps To Attract The Sunlight, Warm Up The Vehicle Windshield And Interior And Avert Frost Build Up
Effortless Storage Can Easily Be Rolled Up And Stored With The Help Of Its Hook And Loop Strap System
Sturdy Core, Features A Foam Core, Which Makes For Easy Handling And A Sturdy Fit In Vehicle Windows And Windshields
Custom Fit Custom Fit For Your Vehicle, And When Properly Installed, Will Remain Snug In Each Window Opening

from

$69.99

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
Made From Durable, Impact-Resistant Acrylic
Available In Dark Smoke And Chrome Finishes

from

$99.99

The Premium Car Cover is our one of kind 3-layer cover. Made from 3 durable layers, this cover provides unparalleled waterproof protection for your vehicle. The Budge Premium car cover combines multiple layers of exceptionally waterproof polypropylene with an interior waterproof membrane while the inner most layer of the cover is comprised of a nonabrasive fleece-like material. This cover is also UV treated to protect against harsh sun exposure.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
Material has a soft inner lining that will not scratch the surface of your vehicle
Built-in strap and buckle system keeps cover secure
This car cover is made from 3 durable layers that will keep your vehicle protected
Full elastic hem creates a comfortable fit

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$114.99

Need a new key fob? This DIY keyless remote is designed to match the appearance and function of the original on specific vehicle years, makes, models and configurations. With easy-to-follow instructions, you can program it yourself in minutes, and rely on it for years.

Product Features:

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
Do-it-yourself solution – follow the simple onboard programming procedure in the included instructions to set up your new fob in minutes
Durable construction – made from quality, drop-resistant components to ensure reliable performance and long service life
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

from

$28.99

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$11.99

Cracked or wore out your key fob case: Want to add a custom look or differentiate between multiple keys – Simply install these silicone protective remote covers over your hard plastic OE remote case in seconds without any tools. Convenient and affordable, these keyless entry transmitter covers can be used to restore or enhance the look of your existing keyless remote, and the precision fit helps to keep moisture and debris out while protecting the fob from casual drops, scratches, and damage. Two silicone covers (one black, and one blue) are included in each package.

Product Features:

Product Features:

Replacement or upgrade – this keyless remote cover allows you to simply cover a damaged plastic remote case, protect a new replacement case, or upgrade your current look
Precision fit – matches dimensions of original keyless remote for specific vehicle applications for a clean look
Reliable construction – keeps moisture and debris out of internal electronics to help extend service life, and protects the fob from casual drops, scratches, and damage
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$141.99

This Remote Key Combo is both a bladed key which starts your ignition and a clicker for your vehicle’s Keyless Entry System. The device is compatible with a spectrum of Subaru models produced between 2012-2017 and comes with an illustrative four button layout: LOCK, UNLOCK, TRUNK, and PANIC. The blade itself is uncut and it will need to be cut by a locksmith or automotive professional.

Product Features:

Replacement Subaru Remote Head Key Combo with FCC ID: CWTWB1U811 / Transponder Chip: Texas 4D-60
4 button functions: LOCK, UNLOCK, TRUNK, and PANIC
Freshly installed battery included

from

$82.99

This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard. If the car’s receiver recognizes the code, it will allow the car to start. This key holds a Texas 4D-60 transponder chip. The key blade will need to be cut by a locksmith or automotive professional.

Product Features:

Replacement Transponder Key for Compatible Subaru Vehicles
Contains a transponder chip for enhanced security
Key blade ready for cutting and pairing

from

$27.99

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

Engine heater replacement cord

from

$184.99

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$184.99

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$69.99

The AVS Carflector hood shield is designed specifically for cars, CUVs, and SUVs with its medium profile wrap design to provide protection from road debris. Comes with a the AVS Carflector is car wash safe and easy to install.

Product Features:

Provides Deflection To Protect Hood, Fenders, And Windshield
Medium Profile, Wrap-Around Design For Cars And CUVs
Off-The-Hood Design Allows For Easy Cleaning And Waxing
Durable, Impact-Resistant Acrylic Construction
Available In Dark Smoke Finish
Easy, No-Drill Installation

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$19.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
Universal Fit
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
133dB @ 4″, 12V

from

$25.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX HIGH note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
133dB at 4″, 12V

Subaru Legacy Interior Products

from

$276.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$101.99

Dashboard Cover

from

$101.99

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

Soft foss fiber carpet won’t fray or unravel
Custom fit to the dashboard of your vehicle
Helps prevent dashboard warping and cracking
Reduces hazardous windshield glare
Passenger-side airbag opening included where applicable
Hook and loop fasteners included for easy secure installation

from

$18.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$14.99

This seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles
Restores functionality – this buckle stop is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Pedal Position Switch detects the position of the accelerator pedal, providing essential input to the vehicle¿s engine control unit for optimal performance and efficient fuel management. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$27.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$26.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$23.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$193.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$103.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$21.99

The Am-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

Features corrosion resistant steel housing and universal mounting bracket.
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
Available in high and low tone
125 @ 4″, 12V

from

$19.99

The AM-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

Features corrosion resistant steel housing and universal mounting bracket.
Available in high and low tone
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle with 12 volt application
125dB @ 4″, 12V

from

$137.99

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$296.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$33.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Hazard Warning Switch activates the vehicle’s emergency lights, enhancing safety by alerting other drivers to potential hazards and ensuring visibility during roadside emergencies or adverse conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$28.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$357.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$151.99

The Combination Switch combines the windshield wiper switch, windshield washer switch, headlight dimmer switch along with other possible features into one combined switch assembly mounted onto the steering column assembly.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$161.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$57.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Looking for the best Subaru Legacy aftermarket replacement parts? Replacing worn and broken parts on your Subaru Legacy? Check out our online catalog to find the best selection of aftermarket Subaru Legacy parts as well as real user reviews on Subaru Legacy replacement parts. Make an informed decision about every component you add to your Legacy.

At Advance Auto, we’ve got you covered when it comes to getting your Subaru Legacy in tip top condition. We’ve got over 3,695 Subaru Legacy parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Subaru Legacy parts catalog to compare OEM and aftermarket parts for your Subaru Legacy.

Whether you need Subaru Legacy body parts, interior components, or custom Subaru Legacy parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Subaru Interior Products same day? No problem, you can pick up Legacy parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Subaru Legacy parts has never been easier.

Advance Auto customers frequently search for the following types of Subaru Legacy auto parts. Check out customer reviews and ratings, and compare prices on the following Subaru Legacy parts:

People also search Advance Auto for these popular years of the Subaru Legacy:

Subaru Legacy Parts

KAI – Bumper Cover Bracket (Part No.SU1041100C)

KAI – Hood Panel (Part No.SU1230115V)

Carquest Premium – Trunk Lock (Part No.TLA1361)

KAI – Fender Liner (Part No.SU1248121)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Dorman – Help – DOOR HANDLE (Part No.67934)

KAI – Bumper Cover (Part No.SU1000160PP)

KAI – Fender (Part No.SU1240140)

KAI – New CAPA Certified Standard Replacement Grille (Part No.SU1200194C)

KAI – Bumper Impact Absorber (Part No.SU1070117C)

Carquest Premium – Door Window Switch (Part No.SBC4481)

K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.71509U)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.748-888)

Carquest Premium – Door Lock Kit (Part No.DLA1821)

KAI – New Standard Replacement Door Mirror (Part No.SU1321146)

KAI – Hood Hinge (Part No.SU1236105)

KAI – Fender Splash Shield (Part No.SU1250103)

Dorman – COWL VENT PUSH RETNR (Part No.963-164D)

Dorman – Help – Exterior Door Handle Textured Black (Part No.82683)

Le Bra – Front End Cover (Part No.55768-01)

KAI – Hood Panel (Part No.SU1230137PP)

K-Source – Passenger Car Replacement Glass: Passenger Side, Convex Glass, Includes Mounting Tape & Instructions (Part No.90131)

KAI – Bumper Support (Part No.SU1062100)

KAI – Bumper Cover Bracket (Part No.SU1043100V)

StrongArm – Tailgate Lift Support: 22.75" Ext Length, 8.785" Travel, 90 Lbs of Force, 1 Pk (Part No.C6222R)

Carquest Premium – ABS sensor (Part No.ARC1248)

Carquest Premium – Neutral Safety Switch (Part No.SAA3957)

FAG US – Shaft Seal (Part No.SS3004)

Carquest Premium – Multi-Purpose Relay (Part No.RAA3065)

National – Multi-Purpose Bearing (Part No.30208)

Carquest Premium – Traction Control Switch (Part No.SBA2725)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.9559)

Carquest Premium – Back Up Light Switch (Part No.SAA3826)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 9.8 Quart (Part No.265-859)

National – Differential Pinion Seal (Part No.1173)

Whiteline – Gearbox Selector Bushing (Part No.KDT958)

National – Multi-Purpose Seal (Part No.223051)

FAG US – General Seal (Part No.SS2343)

Felpro – Transmission Oil Pan Gasket: 15 Bolt Hole, One Piece Gasket (Part No.TOS 18776)

National – Multi-Purpose Seal (Part No.225005)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.9560)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNE1538)

National – Multi-Purpose Seal (Part No.2027)

National – Multi Purpose Seal (Part No.710324)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-703)

National – Multi-Purpose Seal (Part No.710265)

National – Multi-Purpose Seal (Part No.711110)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-702)

ATP – AUTO TRANS BAND (Part No.NX-23)

LuK – Clutch Slave Cylinder (Part No.LSC611)

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC424)

LuK – Clutch Slave Cylinder (Part No.LSC329)

National – Multi Purpose Bearing (Part No.614159)

LuK – LuK Original Equipment Quality Replacement CLUTCH MASTER CYLINDER (Part No.LMC391)

LuK – LuK Original Equipment Quality Replacement CLUTCH MASTER CYLINDER (Part No.LMC571)

LuK – LuK Original Equipment Quality Replacement CLUTCH MASTER CYLINDER (Part No.LMC469)

Dorman – Help – Clutch Pilot Bearing (Part No.14671)

Dorman – Clutch Pilot Bearing (Part No.690-046.1)

Dorman – Clutch Pilot Bearing (Sold by each) (Part No.690-046)

ATP – Clutch Cable (Part No.Y-782)

Advanced Clutch – ACT 2004 Subaru Impreza XACT Flywheel Streetlite (Part No.600235)

LuK – OE Quality Flywheel (Part No.LFW262)

LuK – Original Equipment Quality Replacement Flywheel (Part No.LFW270)

LuK – OE Quality Flywheel (Part No.LFW369)

LuK – Clutch Kit: 8 7/8" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.15-030)

LuK – Clutch Kit: 8 7/8" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.15-010)

LuK – Clutch Kit: 9 1/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.15-024)

Advanced Clutch – ACT 2006 Subaru Impreza HD/Perf Street Sprung Clutch Kit (Part No.SB11-HDSS)

LuK – Original Equipment Quality Replacement Clutch Kit (Part No.15-032)

Carquest Wearever – Brake Hydraulic Hose (Part No.H380205)

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA621839)

Carquest Wearever – Brake Hydraulic Hose (Part No.H380170)

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA621840)

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA621838)

KAI – Undercar Shield (Part No.SU1228106)

Rightline Gear – Range 3 Car Top Carrier (Part No.100R30)

Dorman – Keyless Entry Remote 4 Button – Blade Stamp G (Part No.99662ST)

WeatherTech – Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 4 (Part No.84516)