1992 Ford F-250 Pickup Fuel and Emissions Systems

Essential 1992 Ford F-250 Pickup Fuel and Emissions Systems

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal (Part No.HP10149)

Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal

from

$139.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Lower failure rates due to its innovative design and durability
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
See More

Carquest Premium – Idle Air Control Valve (Part No.ABC1638)

Idle Air Control Valve

from

$65.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Idle Air Control Valve (Part No.ABC1634)

Idle Air Control Valve

from

$60.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings

from

$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL003)

Fuel Injector Return Hose Kit

from

$50.99
This complete kit includes necessary components to replace the fuel injector return lines and copper gaskets on the fuel injectors.

Product Features:
  • Includes fuel return line
  • Includes 8 fuel injector copper combustion seals
  • Includes 16 injector O-rings
  • Includes 18 clamps
  • Includes 8 plastic return fittings
  • Premium OE quality materials
See More

Mahle – GS33440 Diesel Fuel Injection Nozzle O-Ring Kit (Part No.C1013200424MAH)

GS33440 Diesel Fuel Injection Nozzle O-Ring Kit

from

$18.72
Mahle gaskets, distributed by MAHLE Aftermarket, provides world class sealing products trusted by OEMs and Technicians around the globe. All Mahle gaskets meet or exceed the original equipment specifications providing the finest sealing products available. Mahle provides the ultimate sealing products for your light/medium duty diesel engine. Exclusive Mahle gasket coverage, not available from competitors.

Product Features:
  • Mahle gaskets, distributed by MAHLE Aftermarket, provides world class sealing products trusted by OEMs and Technicians around the globe
  • All Mahle gaskets meet or exceed the original equipment specifications providing the finest sealing products available
See More

Mahle – Fuel Injector O-Ring (Part No.C10132590067MAH)

Fuel Injector O-Ring

from

$8.61
Fuel Injector O-Ring

Carquest – Fuel Tank Straps (Includes 2 Straps) (Part No.578-016)

Fuel Tank Straps (Includes 2 Straps)

from

$34.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
  • Direct fit ensures safe, secure fuel tank installation
  • Product individually packaged and labeled to help reduce product damage prior to installation
  • Industry leading coverage on straps for plastic tanks
See More

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Walker Products – Air Charge Temperature Sensor (Part No.C6000352505WKR)

Air Charge Temperature Sensor

from

$25.06
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Delphi – Fuel Lift Pump: With Gasket (Part No.HFP907)

Fuel Lift Pump: With Gasket

from

$29.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • All pumps are functionally tested for correct operation which improves pump reliability
  • Exact fit original equipment replacements means easy installation
  • Consistent pressure at all operating temperatures results in quick start-ups.
  • Pump is designed for diesel engines and applications
  • Always check fuel filter when replacing the fuel pump
See More

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1366)

Air Charge Temperature Sensor Connector

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Engine Vacuum Pump Pulley (Part No.300-701)

Engine Vacuum Pump Pulley

from

$58.99
This vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Strainer FS260347 (Part No.FS260347)

Fuel Pump Strainer FS260347

from

$23.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Ported Vacuum Switch (Part No.SBA5435)

Ported Vacuum Switch

from

$19.79
Ported Vacuum Switch

Mahle – Idle Control Valve Gasket (Part No.C4063195530MAH)

Idle Control Valve Gasket

from

$4.07
The Mahle Idle Control Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Meets or exceeds OEM specifications
See More

Carquest – Fuel Injection Pressure Regulator (Part No.21863)

Fuel Injection Pressure Regulator

from

$47.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Application-specific to ensure the proper fit and form
  • Precision-engineered pressure regulators for proper fuel delivery and engine performance
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

NTK – Air Charge Temperature Sensor (Part No.EF0016)

Air Charge Temperature Sensor

from

$30.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1019)

Fuel Injection Pressure Sensor

from

$71.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Fuel Tank Selector Valve (Part No.U7001)

Fuel Tank Selector Valve

from

$152.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Motorcraft – Fuel Pres. Reg. O-Ri (Part No.C3002374042MTR)

Fuel Pres. Reg. O-Ri

from

$12.77
Fuel Pres. Reg. O-Ri

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Control Solenoid (Part No.EGC1292)

Exhaust Gas Recirculation (EGR) Valve Control Solenoid

from

$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LR2001)

Fuel Tank Lock Ring

from

$20.99
CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:
  • Precision stamped for perfect fit and pump position
  • Always replace lock ring as a part of fuel pump service
See More

Delphi – Fuel Tank Sending Un (Part No.E2030351532DEL)

Fuel Tank Sending Un

from

$914.26
The Delphi Fuel Level Sensor is a magnetic, non-contacting angular position sensor that converts rotary motion into an electrical signal to provide accurate fuel level measurement and enable reliable fuel gauge readout. Its small, modular design allows a wide range of applications and its calibrated output signal compensates for component and assembly variations. Design features enable dependable performance and durability. The Fuel Level Sensor’s linear output voltage is directly proportional to the sensor’s field, perpendicular to the sense element. Non-contact performance is made possible by state-of-the-art linear programmable, fully integrated Hall effect and Anisotropic magneto resistive (AMR) technologies. Rotating magnets generate Hall voltage with a sine wave response signal, with zero when the magnets are parallel to the sense element and plus/minus when the magnets are at angles to the sense element. The sensor operates in a linear region of the sine wave response signal. The Delphi Fuel Level Sensor features a proven magnetic circuit technology that has been used in high volume absolute position sensor applications for more than 10 years. The non-contacting design of the sensor maximizes product life by eliminating signal deterioration due to contact wear, ink failure or dendritic growth. Its low current draw with high resolution output signal may be calibrated for the angular travel of a specific application to compensate for assembly variations.

Product Features:
  • Low cost with electrical interface that powers and reads Hall effect output signal
  • High volume manufacturing processes help achieve competitive cost
  • Can be easily modified to meet specific customer requirements
  • Protection against contamination and fuel exposure
  • Lower drive current minimizes system power consumption
  • High resolution linear output signal with low hysteresis for improved system performance
  • Electro-Magnetic Capability (ECM) compliance
  • Available with 2-wire Pulse Width Modulation (PWM) interface, and may be designed for 3-wire PWM or ratiometric interfaces for application flexibility
See More

Cardone New – Fuel Injection Pump Installation Kit (Part No.2K-203)

Fuel Injection Pump Installation Kit

from

$30.99
CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:
  • All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
  • Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Dorman – Diesel Fuel Filter Heater (Part No.904-539)

Diesel Fuel Filter Heater

from

$89.99
This replacement diesel fuel heating element matches the function and performance of the original equipment part. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:
  • Ideal replacement – this diesel fuel heating element matches the original equipment part’s function and performance
  • Durable construction – this heating element is made of durable materials to withstand exposure to diesel fuel
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone vehicle try-on and bench testing to ensure a quality fit and long service life
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1031)

Secondary Air Injection Pump Check Valve

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Vacuum Control Valve (Part No.D3020672044MTR)

Vacuum Control Valve

from

$15.32
Vacuum Control Valve

Popular 1992 Ford F-250 Pickup Fuel and Emissions Systems Categories

1992 Ford F-250 Pickup Fuel and Emissions Systems

You count on your 1992 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 252 Fuel and Emissions Systems ranging in price from $2.24 to $902.99, you’re sure to find everything you need for your 1992 Ford F-250 Pickup.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 24 different brands like Carquest Premium, Felpro, and Bosch. 1992 Ford F-250 Pickup Fuel and Emissions Systems start as low as $2.24!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 4,750 extensive product reviews on 1992 Ford F-250 Pickup Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit with 4.5 stars and Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit with 4.6 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1992 Ford F-250 Pickup below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1992 Ford F-250 Pickup

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Bosch, and even more.

Popular Flowtech Fuel and Emissions Systems

You’ll find popular Flowtech brand products across Oxygen Sensors. All are waiting to get your 1992 Ford F-250 Pickup back on the road. Some of the top-rated Flowtech products in these categories are:
Reducer w/O2 Sensor Fitting
from $65.99
(1)
Reducer w/O2 Sensor Fitting
Oxygen Sensor Connectors

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1992 Ford F-250 Pickup, and some of our most reviewed Carquest Premium parts include:

FAQs for 1992 Ford F-250 Pickup Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1992 Ford F-250 Pickup?

Out of 252 Fuel and Emissions Systems for the 1992 Ford F-250 Pickup, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits

What are the top-rated 1992 Ford F-250 Pickup Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1992 Ford F-250 Pickup based on customer reviews/ratings are:
Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit
from $56.99
(332)
Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit
“Easy installation”
Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit
from $59.99
(129)
Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit
“exact fit works fine”
Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit
from $49.99
(73)
Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit
“Exact fit for my Dodge Dakota;”