1991 Chevrolet Blazer Transmission Parts

Below you will find various in-demand Chevrolet Transmission Parts, components and accessories for your 1991 Blazer. Advance Auto Parts has popular Blazer parts like Transmission Mounts, Transmission Bearings, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other Blazer model years including 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2019 and more. Select a category of 1991 Chevrolet Blazer Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1991 Chevrolet Blazer Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Transfer Shaft Bearing

Manual Transmission Differential Bearings

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Bushings

Detent Cables

Automatic Transmission Output Shaft Seals

Automatic Transmission Oil Pump Seals

Pinion Seals

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Manual Transmission Bearing and Seal Overhaul Kits

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Gear Shift Lever Bushing

Transmission Shift Kits

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Selector Shaft Seals

Manual Transmission Main Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Automatic Transmission Detent Cable Seals

Shift Shaft Seals

Automatic Transmission Oil Pump Gaskets

Manual Transmission Seals

Automatic Transmission Oil Pump O-Rings

Automatic Transmission Shifter Cable Brackets

Remanufactured Automatic Transmissions

Torque Converter Bearings

Manual Transmission Bearing

Manual Transmission Seal Kit

Back Up Light Switch Clips

Automatic Transmission Oil Pump Seal Kit

Auto Trans Differential Bearing and Race Set

Essential Transmission Parts for 1991 Chevrolet Blazers

from

$16.79

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$136.99

These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.

Product Features:

Stock Depth And Capacity
Chrome Plated
Includes Drain Plug/Gasket/Hardware

from

$31.49

B&M cable bracket fits GM Powerglide transmissions.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
B&M quality

from

$15.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.29

AT EXT HOUSING SEAL

from

$84.99

AT PRESS SW MANIFOLD

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$41.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$27.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications

from

$29.99

AUTO TRANS BAND

from

$3.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$12.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission line fitting kit
GM, Jeep; 5/8″-18 inverted flare
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$21.29

AT OIL PUMP SEAL

from

$24.49

AT EXT HOUSING SEAL

from

$6.99

Anchor 2108 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1955-1991
Weight approx: 1 Lbs
Reuse Bracket

from

$306.99

These B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes. Adds 3 quarts to the Transmission.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$5.99

We offer a line of Auto Trans Shift Lever Control Rod Bushings for a range of applications. All our Auto Trans Shift Lever Control Rod Bushings are made of quality materials for a long service life.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$27.99

ACDelco GM Original Equipment Parking / Neutral Position and Back Up Light Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$58.99

This direct replacement ABS wheel speed sensor matches the fit and function of an original equipment sensor. Made of quality materials with factory-style electrical connectors, this sensor has been designed and tested to be durable and reliable.

Product Features:

Ideal replacement – this ABS wheel speed sensor exactly matches the fit and function of the original equipment sensor to restore safe braking performance in all conditions
Durable construction – this wheel speed sensor is made from quality materials to ensure a reliable repair and a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this ABS sensor has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$29.99

All lighting sockets and accessories are direct replacements for the original unit per vehicle application for ease of installation. Follow all electrical repair procedures for a quality repair where applicable.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$767.99

Converter: 4L60E/4L65E 28-3200 Stall

from

$268.99

One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Include steels, frictions, gaskets, and filter
Includes Band and Modulator (if applicable)

from

$10.79

AT OIL PAN GASKET

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Upgrade your 1991 Chevrolet Blazer with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1991 Chevrolet Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 153 Transmission Parts for the 1991 Chevrolet Blazer, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Transmission Bearings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1991 Chevrolet Blazer at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $1,999.99, with an average price of $201.83. Our 153 Transmission Parts in stock come from 22 trusted brands, so you’re sure to find the right part for your 1991 Chevrolet Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Chevrolet Blazer, we stock popular OEM and aftermarket Transmission Parts from top names like National, B & M, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. B & M and Imperial also bring quality to the table, with Transmission Parts available starting at $33.99, and at an average 4.1 stars rating. With 781 customer reviews and counting, our 1991 Chevrolet Blazer Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Chevrolet Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your Blazer in top shape, all in one place. Start shopping confidently below for your 1991 Chevrolet Blazer!

Best-Selling Transmission Mounts for 1991 Chevrolet Blazers

Enhance the driving experience in your Chevrolet with 6 quality Transmission Mount components, starting at $6.99.

show more show less

from

$6.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1955-1991
Weight approx: 1 Lbs
Reuse Bracket

from

$28.49

Anchor 2638 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
Studs: M10-150
Interlock
Bolt Holes Centerline: 7.5 Inch / 190.5 Mm

from

$99.99

Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:

Durable Polyurethane
Absorbs Vibration
Last Longer Than Rubber
Built-In Safety Lock

from

$97.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$53.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

from

$48.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

Most Popular 1991 Chevrolet Blazer Transmission Bearings

Customize your Chevrolet with 14 Transmission Bearings products like Countershaft Bearings, Automatic Transmission Differential Bearings, and Pinion Bearings, all priced under $43.99.

show more show less

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.99

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$21.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$32.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$43.99

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$35.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$24.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top Picks for 1991 Chevrolet Blazer Transmission Seals

Upgrade Chevrolet Blazers with top-quality Transmission Seals parts, including 31 OEM and aftermarket selections for your 1991 model.

show more show less

from

$18.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.59

AT SEL SHAFT SEAL

from

$3.99

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$22.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.39

AT DPSTK TUBE SEAL

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$4.29

AT DETENT CABLE SEAL

from

$4.99

from

$8.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.29

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

AT EXT HOUSING SEAL

from

$9.59

AT EXT HOUSING SEAL

from

$14.49

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Product Features:

Brand may vary by location

from

$17.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$31.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.59

AT EXT HOUSING SEAL

from

$246.99

ManTransBrg-SealKit

In-Demand Automatic Transmission Parts for 1991 Chevrolet Blazers

Select from 15 premium Automatic Transmission Parts parts for your 1991 Chevrolet Blazer, with prices ranging from $7.99 to $1,634.99.

show more show less

from

$36.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$11.99

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.59

AT OIL PUMP ORING

from

$36.49

AUTO TRANS BAND

from

$12.79

AT FRT PUMP BUSHING

from

$65.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$27.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications

from

$158.99

ATHARNESS VSS REPR

from

$94.99

AT CONTR SOLENOID

from

$51.99

AT/HARNESS VSS REPR

from

$1634.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$1609.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$69.99

These universal fit adjustable cables will work in 95% of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Product Features:

Universal Fit Adjustable
Less Expensive Than OE Models
Ease Trans. Swap Installation

from

$33.99

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
Replacement for Bandit shifters

Most Sold 1991 Chevrolet Blazer Transmission Cooler and Parts

Explore our best-selling Chevrolet parts for the 1991 Blazer among 15 OEM and aftermarket options starting from $11.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$151.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Top-Rated Transmission Parts Brands For Your 1991 Chevrolet Blazer

Shop for the best-rated brands offering Transmission Parts and other products for your 1991 Chevrolet Blazers. Below you’ll find some of our best rated Transmission Parts from National, B & M, and Imperial, and more. Transmission Parts from these brands that fit a 1991 Blazer start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1991 Chevrolet Blazer Transmission Parts

When it comes to maintaining or upgrading your 1991 Chevrolet Blazer, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1991 Chevrolet Blazer. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $12.99. Plus, with over 22 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

from $18.99

(4)

Multi-Purpose Seal

“great item”

from $6.99

(5)

Multi-Purpose Seal

“Awesome”

Popular B & M 1991 Chevrolet Blazer Transmission Parts

B & M auto parts is one of the highest quality Transmission Part brands in the market. Any 1991 Chevrolet Blazer owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1991 Blazer, Advance Auto Parts carries a full inventory of 3 B & M Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these B & M Transmission Parts range from $33.99 to $86.99, plus, with more than 5 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $33.99

(1)

Cable Bracket

“Use it for a 700R4 swap, need to use B & M cable to fit”

from $86.99

(3)

Shift Improver Kit, 82-93 TH700R4

“I put the stage 1 towing kit in my 700r4 in my Cadillac. It feels great. The job wasn’t too hard but not too easy. Having a 3rd or 4th hand may prove ”

from $48.49

(1)

Shifter Accessories, Bracket and Lever Kit Fits TH400/TH350/TH250/200-4R/700R4

“Cable not perfectly straight. It is hard to believe as long as B&M and th400s have been around, that they do not line up better”

FAQs for 1991 Chevrolet Blazer Transmission Parts

Which Transmission Parts are best-sellers for 1991 Chevrolet Blazers?

Out of 153 Transmission Parts that fit 1991 Chevrolet Blazers, the following parts are the top sellers:

Mounting Kit System (6014844) – $11.99
Transmission Mount: Rear, 1 Piece (5303486) – $28.49
Tapered Cone/Cup Wheel Bearing Set (5050723) – $26.99

What’s the price range for 1991 Chevrolet Blazer Transmission Parts?

Transmission Part prices for the 1991 Chevrolet Blazer start at $1.99 and go up to $1,999.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1991 Chevrolet Blazer?

The average price for Transmission Parts for the 1991 Chevrolet Blazer is $201.83. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chevrolet Blazer model years?

Yes, we currently carry Transmission Parts for 24 model years of Chevrolet Blazers between 1969 and 2019. Transmission Parts are bought most frequently for the following model years: 2019, 2005, 2004, 2003, 2002, 2001, 2000, 1999, and 1998.

What are the cheapest Transmission Parts for my 1991 Chevrolet Blazer?

The cheapest 1991 Chevrolet Blazer Transmission Parts we carry in stock are:

Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
Oil Seal (5440149) – $3.99
Differential Pinion Seal (10751056) – $3.99
AT DETENT CABLE SEAL (10861026) – $4.29
Taper Bearing Cup (5050162) – $4.99

What are the top-rated Transmission Parts that fit the 1991 Chevrolet Blazer?

Out of 781 reviews by customers, our 1991 Chevrolet Blazer Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1991 Chevrolet Blazer and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 17 Bolt Hole One Piece Gasket (5992044) – $16.99
- Chrome Automatic Transmission Oil Pan with Drain Plug (17360645) – $77.99
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99
Automatic Transmission Differential
- Transmission Oil Pan Gasket 17 Bolt Hole One Piece Gasket (5992044) – $16.99
- Chrome Automatic Transmission Oil Pan with Drain Plug (17360645) – $77.99
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99

What types of Transmission Parts do you sell for my 1991 Chevrolet Blazer?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 1991 Chevrolet Blazer:

Can I get help with 1991 Chevrolet Blazer Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.

What is your return policy for Chevrolet Blazer Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Blazer Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1991 Chevrolet Blazer Transmission Parts

Schaeffler – Shaft Seal (Part No.SS2571)

Mr. Gasket – A/Toilpan (Part No.9791G)

B & M – Cable Bracket (Part No.70460)

Schaeffler – Shaft Seal (Part No.SS2803)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

National – Multi-Purpose Seal (Part No.7038SA)

National – Multi-Purpose Seal (Part No.6835S)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

ATP – AT PRESS SW MANIFOLD (Part No.JE-9)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBA4949)

Pro-King – Automatic Transmission Solenoid (Part No.52-0211)

ATP – AUTO TRANS BAND (Part No.JX-58)

Motive Gear – Differential Pinion Seal (Part No.2043)

Imperial – Transmission Line Fitting Kit (Part No.240390)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

ATP – AT EXT HOUSING SEAL (Part No.JO-124)

Anchor – Transmission Mount: Left, Right, 1 Piece (Part No.2108)

B & M – Transmission Cast Deep Pan, Brushed Finish TH-350 (Part No.30280)

Dorman – Help – Shifter Link Bushing (Part No.02373)

GM Genuine Parts – Parking / Neutral Position and Back Up Light Switch (Part No.D2209D)

Dorman – Anti-Lock Brake Sensor with Harness (Part No.970-010)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Carquest Premium – Back Up Light Socket (Part No.PTA1173)

Hays – Converter: 4L60E/4L65E 28-3200 Stall (Part No.97-1H28Q)

Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-15)

ATP – AT OIL PAN GASKET (Part No.JG-107)

Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18608)

Anchor – Transmission Mount: Left, Right, 1 Piece (Part No.2108)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2638)

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Energy Suspension – Transmission Mount (Part No.3.1129R)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Red (Part No.71223030HKR)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Black (Part No.71223029HKR)

National – Bearing Race (Part No.M88010)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

National – Tapered Roller Bearing Cone (Part No.LM501349)

National – Multi-Purpose Bearing (Part No.207)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Driveworks – Taper Bearing Cup (Part No.S-JLM-104910)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67147)

Schaeffler – Tapered Roller Bearing (Part No.KT63)

Schaeffler – Cone (Part No.KM86649)

Schaeffler – Cup (Part No.M802011)

National – Multi-Purpose Seal (Part No.4934)

National – Multi-Purpose Seal (Part No.4583)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

Motive Gear – Differential Pinion Seal (Part No.2043)

National – Multi-Purpose Seal (Part No.4528N)

National – Multi-Purpose Seal (Part No.4333N)

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-3227)

Driveworks – Oil Seal (Part No.S-9449)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

Motive Gear – Pinion Seal (Part No.8610)

National – Multi-Purpose Seal (Part No.4598)

National – Multi-Purpose Seal (Part No.710597)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

National – Multi-Purpose Seal (Part No.4529N)

National – Multi-Purpose Seal (Part No.410085)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-4934)

National – Manual Transmission Output Shaft Seal (Part No.4532N)

National – Multi-Purpose Seal (Part No.2457)

National – Multi-Purpose Seal (Part No.4530)

ATP – AT EXT HOUSING SEAL (Part No.JO-57)

USA Standard Gear – ManTransBrg-SealKit (Part No.73131)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

Dorman – Help – Clutch Pilot Bushing (Part No.14650)

ATP – AT OIL PUMP ORING (Part No.SO-21)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)