1991 Cadillac Allante Cooling and Climate Controls

Name: Radiator: With Engine And Transmission Oil Coolers
Brand: Carquest Premium
SKU: 433856
Price: 205.99 USD
Rating: 4.5 (6 reviews)

Below you will find various in-demand Cadillac Cooling and Climate Controls, components and accessories for your 1991 Allante. Advance Auto Parts has popular Allante parts like Blower Motor and Related Products, Heating Parts, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Allante model years including 1987, 1988, 1989, 1990, 1992, 1993 and more. Select a category of 1991 Cadillac Allante Cooling and Climate Controls below and start saving instantly.

Popular 1991 Cadillac Allante Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Radiator Caps

AC Compressor Without Clutch

Thermostats

ABS Control Relays

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

AC Clutch

AC Compressor Relays

Coolant Temperature Sensors

AC Condenser Fan Motors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Blower Motor Resistors

AC Harness Connectors

Air Conditioning Relays

AC Line O-Rings

AC Compressor Cut-Out Relays

HVAC Automatic Temperature Control (ATC) Relays

Thermostat Housings

AC Relay Connectors

Accumulator and Receiver Driers

AC Clutch Bearings

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

Expansion Tank Hoses

AC O-Ring and Gasket Kits

Blower Motor Resistor Connectors

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Control Valves

Radiator Drain Plugs

AC Compressor Cut-Off Switches

HVAC Control Vacuum Check Valves

AC Compressor Pressure Switches

AC Compressor Switch Connectors

Coolant Temp Sending Unit Switch Connectors

AC Compressor Gaskets

Radiator Cap Adapters

AC Compressor Thrust Bearings

AC Compressor Seals

AC Low Pressure Side Switches

AC Clutch Pulleys and Rims

AC Accumulator Bracket Retainer

AC Manifold Seal

HVAC Temperature Delay Relay Harness Connectors

HVAC Blower Control Modules

HVAC Speed Blower Control Module Connector

Essential Cooling and Climate Controls for 1991 Cadillac Allantes

from

$205.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$15.79

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$75.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$19.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$30.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$14.99

Accessory Power Relays use a small current to activate an internal switch that allows a larger current to flow to a particular load. All our Accessory Power Relays are constructed of high quality materials for durability.

Product Features:

No special tools required for installation.
Easy to install
Wiring diagram included
Manufactured to strict engineering quality standards

from

$182.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$33.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$15.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$299.99

CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:

Premium OEM Improved, New, with Clutch, with HR6 Compressor
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$438.97

An ACDelco GM Original Equipment Wheel Bearing and Hub Assembly is complete wheel bearing and wheel hub assemblies. The unitized wheel bearing contains dual ball or tapered roller bearing elements sealed with lifetime lubrication and supports the vehicle while allowing the wheel to rotate. This original equipment wheel bearing and hub assembly is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Bearings and Oil Seals. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Bearings and Oil Seals are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. ACDelco offers a variety of bearings and seals for your GM vehicle, such as wheel hub bearings, generator/alternator bearings, front and rear wheel seals, rear axle seals, etc. When smooth, efficient performance is critical, choose ACDelco.

Product Features:

High quality materials ensure long service life
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$14.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$63.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$36.49

Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$273.99

A/C Idler Pulley

from

$24.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Color coded for easy identification
Zinc coated terminal to resist corrosion

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$43.49

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$21.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$241.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$54.99

BEARING

from

$22.99

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
Coated with corrosion and rust inhibitor
100% leak tested

from

$16.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$25.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

Upgrade your 1991 Cadillac Allante with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1991 Cadillac Allante, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Allante functioning at its best. At Advance Auto Parts, we offer a wide selection of 118 Cooling and Climate Controls for the 1991 Cadillac Allante, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Heating Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1991 Cadillac Allante at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.99 to $519.99, with an average price of $62.91. Our 118 Cooling and Climate Controls in stock come from 24 trusted brands, so you’re sure to find the right part for your 1991 Cadillac Allante without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Cadillac Allante, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Motorad UltraStats, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Motorad UltraStats also bring quality to the table, with Cooling and Climate Controls available starting at $2.99, and at an average 4 stars rating. With 1,488 customer reviews and counting, our 1991 Cadillac Allante Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Cadillac Allante is always ready to roll. We’re committed to providing you with everything you need to keep your Allante in top shape, all in one place. Start shopping confidently below for your 1991 Cadillac Allante!

Best-Selling Blower Motor and Related Products for 1991 Cadillac Allantes

Enhance the driving experience in your Cadillac with 7 quality Blower Motor and Related Product components, starting at $14.99.

show more show less

from

$244.99

ACDelco GM Original Equipment HVAC Blower Motor Control Modules are microprocessor computers that modulate HVAC blower speed. The control module receives input from the HVAC control module and is a GM-recommended replacement for your vehicle’s original component. This original equipment HVAC blower motor control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$241.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$198.99

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$47.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$43.49

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$32.49

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$14.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top Picks for 1991 Cadillac Allante Air Conditioning Parts

Upgrade Cadillac Allantes with top-quality Air Conditioning Parts parts, including 59 OEM and aftermarket selections for your 1991 model.

show more show less

from

$14.99

No special tools required for installation.
Easy to install
Wiring diagram included
Manufactured to strict engineering quality standards

from

$11.99

GM Genuine Parts A/C Orifice Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Restores A/C performance due to restricted orifice tubes
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$11.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$5.79

ACDelco Professional A/C Orifice Tube is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket tube is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$299.99

Premium OEM Improved, New, with Clutch, with HR6 Compressor
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$2.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$15.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$38.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Matches the OE performance
Long life and reliability
Allows for different size wheels
Vehicle specific applications

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$60.99

ACDelco Professional Engine Cooling Fan Motor is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket motor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$22.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$234.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$67.99

GM Genuine Parts A/C Compressor Relief Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$4.49

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.99

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$11.29

GM Genuine Parts A/C Refrigerant Line Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$14.79

from

$12.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$153.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$43.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$28.49

from

$5.29

Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications

from

$13.49

from

$7.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$2.99

New Standard Replacement A/C Orifice Tube

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$438.97

High quality materials ensure long service life
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$381.99

New Standard Replacement A/C Compressor, H6, 6 Groove, V8 Engine

Product Features:

H6, 6 Groove, V8 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$357.28

A/C Compressor

from

$279.71

ACDelco GM Original Equipment A/C Compressor Clutch Kits include the compressor clutch, which engages and disengages the compressor when the A/C is switched ON and Off, and other related components. This original equipment A/C compressor clutch kit is a GM-recommended replacement for you vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Restore A/C compressor clutch to like new performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$273.99

A/C Idler Pulley

from

$155.99

NEW CLUTCH ASSEMBLY

from

$54.99

BEARING

from

$36.49

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$35.49

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$32.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

In-Demand Expansion Tanks for 1991 Cadillac Allantes

Select from 1 premium Expansion Tanks parts for your 1991 Cadillac Allante.

show more show less

from

$25.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Most Sold 1991 Cadillac Allante Engine Cooling Parts

Explore our best-selling Cadillac parts for the 1991 Allante among 49 OEM and aftermarket options starting from $4.49.

show more show less

from

$9.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$10.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$29.99

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$21.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$9.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$16.79

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$14.29

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$24.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Color coded for easy identification
Zinc coated terminal to resist corrosion

from

$34.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$7.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$205.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$70.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$36.49

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$92.99

Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan

from

$5.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$47.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$18.29

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$22.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$21.99

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications. Feature a brass and copper valve assembly with a stainless steel body for durability. This 180 Deg F thermostat is a bolt-on OEM style replacement that measu

Product Features:

53mm Diameter
Rated For 180 Degrees
High Flow Type
OE Style
Made in The USA

from

$46.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$33.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$21.99

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications. Feature a brass and copper valve assembly with a stainless steel body for durability. This 160 Deg F thermostat is a bolt-on OEM style replacement that measu

Product Features:

54mm Diameter
Rated For 160 Degrees
High Flow Type
OE Style
Made in The USA

from

$115.99

Thin-line electric fan
16″ diameter
1,400 CFM
Use as a pusher or puller fan

from

$177.69

ACDelco Professional Water Pumps are the best way to make sure you have the proper heat protection for the engine in your car, truck or SUV. Built to meet the latest manufacturer-specified designs, ACDelco Water pumps, in both cast-iron and aluminum, are thoroughly pressure-tested to prevent leaks, and feature uniform wall sections and smooth coolant-flow cavities for efficient operation and superior engine protection. High-quality bearings, heat-treated impellers and coated seals mean long life and trouble-free ownership.

Product Features:

Original equipment design and quality
100% new with no remanufactured parts
High quality cast housing
Advanced bearing design for high axial and radial stresses
Advanced sealing technology
Optimum cooling performance and longevity

from

$21.99

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$111.40

The GMB Water Pump contains no remanufactured components and is designed to combat engine overheating associated with higher RPM, performance and high load applications. All GMB Water Pumps feature a precision ground, heavy duty steel bearing that`s completely sealed and lubricated for life. A specially modified, high performance impeller eliminates cavitation at high RPM`s, maintaining maximum volumetric flow of coolant, thus reducing engine temperature and increasing horsepower.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High flow design
Factory lubricated bearing assembly
Precision ground shaft and hub
OE quality forged housing for maximum coolant flow
Precision built and balanced
Pressed on impeller for increased water flow
Unique no sealed required gasket
Unitized seal protects bearings and provides long life leak free performance.
Factory sealed precision ground one piece bearing assembly

from

$519.99

X-Treme S-Blade Electric Fan

from

$286.15

Radiator

from

$119.99

Trimline Straight Blade Electric Fan

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$35.99

ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$28.42

An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$23.13

An ACDelco Professional, premium aftermarket Standard Type Radiator Cap is the ideal high quality replacement for your GM vehicle. It seals and pressurizes your vehicle’s cooling system as the radiator transfers heat from the engine’s coolant to the outside air. This premium aftermarket replacement standard type radiator cap is manufactured to meet or exceed your expectations for fit, form, and function. ACDelco Professional, premium aftermarket Thermostats and Caps offer you an ideal replacement for your worn GM Original Equipment part. Engineered to work with your car, truck, or SUV, ACDelco has a thermostat or cap for virtually any GM vehicle on the road today. ACDelco Professional, premium aftermarket Thermostats and Caps give you our legendary quality at a competitive price.

Product Features:

Fit most models of GM vehicles on the road today for more coverage
Seal and pressurize your vehicle’s cooling system as the radiator transfers heat from the engine’s coolant to the outside air
Professional, premium aftermarket replacement radiator cap
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$20.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$19.79

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$12.81

Radiator Cap

Top-Rated Cooling and Climate Controls Brands For Your 1991 Cadillac Allante

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1991 Cadillac Allantes. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Motorad UltraStats, and more. Cooling and Climate Controls from these brands that fit a 1991 Allante start at just $2.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1991 Cadillac Allante Cooling and Climate Controls

When it comes to maintaining or upgrading your 1991 Cadillac Allante, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1991 Cadillac Allante. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

Popular Carquest Premium 1991 Cadillac Allante Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1991 Cadillac Allante owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1991 Allante, Advance Auto Parts carries a full inventory of 43 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $2.99 to $299.99, plus, with more than 842 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$14.29

This product is not rated

Radiator Cap Tester Adapter

“”

from
$22.99

This product is not rated

Coolant Temperature Sensor

“”

from
$19.99

This product is not rated

Multi Purpose Relay

“”

FAQs for 1991 Cadillac Allante Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1991 Cadillac Allantes?

Out of 118 Cooling and Climate Controls that fit 1991 Cadillac Allantes, the following parts are the top sellers:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Standard Thermostat: 180 Degrees (5653053) – $9.99
Thermostat: 195 Degrees (11920689) – $18.29

What’s the price range for 1991 Cadillac Allante Cooling and Climate Controls?

Cooling and Climate Control prices for the 1991 Cadillac Allante start at $1.99 and go up to $519.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1991 Cadillac Allante?

The average price for Cooling and Climate Controls for the 1991 Cadillac Allante is $62.91. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Cadillac Allante model years?

Yes, we currently carry Cooling and Climate Controls for 6 model years of Cadillac Allantes between 1987 and 1993. Cooling and Climate Controls are bought most frequently for the following model years: 1993, 1992, 1990, 1989, 1988, and 1987.

What are the cheapest Cooling and Climate Controls for my 1991 Cadillac Allante?

The cheapest 1991 Cadillac Allante Cooling and Climate Controls we carry in stock are:

Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
Green Round O-Ring (18890169) – $1.99
Green Round O-Ring (18890821) – $1.99
A/C White Orifice Tube (10052818) – $2.99
A/C Orifice Tube (11745060) – $2.99

What are the top-rated Cooling and Climate Controls that fit the 1991 Cadillac Allante?

Out of 1,488 reviews by customers, our 1991 Cadillac Allante Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1991 Cadillac Allante and their top-rated products:

Expansion Tanks
- Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 9 1/4 Inch Length (15590010) – $25.99
Engine Cooling Parts
- Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 9 1/4 Inch Length (15590010) – $25.99

What types of Cooling and Climate Controls do you sell for my 1991 Cadillac Allante?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1991 Cadillac Allante:

Can I get help with 1991 Cadillac Allante Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Cooling and Climate Controls and more.

What is your return policy for Cadillac Allante Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Cadillac Allante Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1991 Cadillac Allante Cooling and Climate Controls

Carquest Premium – Radiator: With Engine And Transmission Oil Coolers (Part No.433856)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-2010)

Carquest Premium – Heater Core (Part No.398214)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

GM Genuine Parts – Black Multi-Purpose Relay (Part No.13502674)

Carquest Premium – A/C Accumulator (Part No.T33149)

Dorman – 30 AMP 12 Volt 5 Pin Universal Relay (Part No.88069)

Factory Air – New GM Harrison DA6-HR6-HD6-HT6+HE6 Clutch Assembly w/ Coil (Part No.47667)

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35961)

Carquest Premium – A/C Compressor Switch Connector (Part No.PTA1328)

Carquest Premium – New Compressor with Clutch (Part No.T58963)

ACDelco – GM Original Equipment Wheel Hub and Bearing Assembly (Part No.K7001201488ACD)

Carquest Premium – Relay Connector (Part No.PTA1752)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA1535)

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.58-329)

ACDelco – A/C Idler Pulley (Part No.R1081602139ACD)

Factory Air – Coolant Temp Sensor Switch (Part No.36403)

Carquest – A/C and Heater Relay (Part No.R3177)

Carquest Premium – Blower Motor: With Wheel (Part No.35343)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1253)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1181)

FAG US – BEARING (Part No.5908-VAW)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85284)

Felpro – WATER PUMP GASKET SET (Part No.35656)

Dayco – Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 9 1/4 Inch Length (Part No.87000)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

ACDelco – Heating and Air Conditioning Blower Control Module (Part No.15-72530)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1181)

Dorman – BMR (Part No.973-072)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA2624)

Carquest Premium – Blower Motor: Without Wheel (Part No.35351)

Carquest Premium – Blower Motor: With Wheel (Part No.35385)

Carquest Premium – Relay Connector (Part No.PTA1752)

Carquest Premium – Heater Core (Part No.398214)

Dorman – Help – Two-Way Check Valve (Part No.47150)

Dorman – 30 AMP 12 Volt 5 Pin Universal Relay (Part No.88069)

GM Genuine Parts – Air Conditioning Orifice Tube (Part No.15-5151)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26731)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35756)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35961)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

ACDelco – Air Conditioning Orifice Tube (Part No.15-5754)

Carquest Premium – New Compressor with Clutch (Part No.T58963)

Carquest Premium – A/C White Orifice Tube (Part No.T38623)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35974)

Carquest – A/C and Heater Relay (Part No.R3177)

Carquest Premium – 2 Pole Radiator or Condenser Fan Motor (Part No.35380)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

ACDelco – Engine Cooling Fan Motor (Part No.15-80033)

Driveworks – Ball Bearing (Part No.S-907257)

Carquest Standard – Reman GM HR6, DA6 Compressor w/ Clutch (Part No.DW57863)

GM Genuine Parts – Air Conditioning Compressor Relief Valve (Part No.15-5711)

Carquest – Multi Purpose Relay (Part No.83A1001)

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Dorman – Metal Clip Nut No.8 (Part No.961-304D)

Dorman – 5-Wire Style Relay (Part No.85170)

Dorman – Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (Part No.45406)

Factory Air – Green Round O-Ring (Part No.24650)

Factory Air – Green Round O-Ring (Part No.24615)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

GM Genuine Parts – Air Conditioning Evaporator Fitting Gasket (Part No.15-2722)

Carquest Premium – Multi Purpose Relay (Part No.RAA1249)

Factory Air – Standard Relay (Part No.35927)

Factory Air – New GM Harrison DA6-HR6-HD6-HT6+HE6 Clutch Assembly w/ Coil (Part No.47655)

National – Bearings (Part No.907257)

Carquest Premium – Window Defroster Relay (Part No.RAA1242)

Factory Air – Sealing Washer Kit (Part No.24338)

Carquest Premium – Multi Purpose Relay (Part No.ACA1344)

Carquest – Multi Purpose Relay (Part No.83A1011)

KAI – A/C Orifice Tube (Part No.FJC3111)

ACDelco – GM Original Equipment Wheel Hub and Bearing Assembly (Part No.K7001201488ACD)

KAI – A/C Compressor, H6, 6 Groove, V8 Engine (Part No.ACP010052)

Autopart International Inc – A/C Compressor (Part No.R10003198986API)

ACDelco – A/C Compressor Clutch (Part No.R1010601780ACD)