Cadillac Allante Parts

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
• Made of high grade nylon for easy installation
• Removable buttons for cooler/fan relocation
• Made for both transmission coolers and electric fan installation
• Comes with Quick Connect coupler

Anchor 2779 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1987-1992
• Weight approx: 5 Lbs
• Hydraulic

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

• Saves money by allowing cable repair instead of replacement.
• Easy to use

REUSABLE AT PAN GSKT

AT CONTR SOLENOID

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Imperial mounting kit system
• For installation of transmission coolers and electric fans
• Provides quick, effective installation of Imperial products
• Contains nylon mounting rods, foam pads and locking buttons
• Aftermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation
• Aftermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation

Product Features:

• ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

• Meets or exceeds OE specifications
• Anti-Clogging Design

AT PRESS SW MANIFOLD

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
• Good dry heat resistance
• Excellent low temperature capability
• Delivers quality and reliable performance for every type of repair

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Vehicle Speed Sensor

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission line fitting kit
• GM, Jeep; 5/8″-18 inverted flare
• Helps simplify transmission cooler installation
• Allows for auxiliary transmission cooler installation without cutting OE lines
• Crafted from high-quality material that makes it durable and longer-lasting
• A high quality, direct fit OE replacement
• Easily connects the transmission cooler line to the cooler hose
• Coated for extra protection against corrosion
• Crafted from high-quality material that makes it durable and longer-lasting
• A high quality, direct fit OE replacement
• Easily connects the transmission cooler line to the cooler hose
• Coated for extra protection against corrosion

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Product Features:

• Design type: springless; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

ATHARNESS VSS REPR

AT MASTER REPAIR KIT

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

• High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
• Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
• Large Diameter, Low Profile Design
• Complete With Washers
• Sold As A Kit
• 180,000 PSI

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

• High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
• Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
• Large Diameter, Low Profile Design
• Complete With Washers
• 200,000 PSI
• 1″ Underhead Length
• 3/8″-16 Thread Size

AT FLEX PLATE

ATP Flywheel Shim

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor
• Manufactured In America To ISO 9001 Standards, And Also Meet FMVSS302 Standards-Your Assurance Of Quality

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This indoor vehicle cover is made from a stretchable material conforms to you car
• Extremely soft fleece lining to protect your car from scratches
• This auto cover is suitable for indoor use or for garage kept vehicles
• This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This car cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H.
• This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
• This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
• This vehicle cover features ultrasonically welded seams for extra durability
• Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

The Budge Basic car cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic car cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic car covers are light gray in color. This is a suitable indoor and short term outdoor cover for your car. Our covers are available in a variety of sizes that will popular car makes and models. Cover includes a storage bag and antenna patch.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This car cover is suitable for indoor and short term outdoor storage
• This vehicle cover features double stitched seams for added durability
• A full elastic hem helps keep the car cover securely on your vehicle
• Will defend against dust, dirt, bird droppings, tree sap and more

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This indoor vehicle cover is made from a stretchable material conforms to you car
• Extremely soft fleece lining to protect your car from scratches
• This auto cover is suitable for indoor use or for garage kept vehicles
• This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

The Premium Car Cover is our one of kind 3-layer cover. Made from 3 durable layers, this cover provides unparalleled waterproof protection for your vehicle. The Budge Premium car cover combines multiple layers of exceptionally waterproof polypropylene with an interior waterproof membrane while the inner most layer of the cover is comprised of a nonabrasive fleece-like material. This cover is also UV treated to protect against harsh sun exposure.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• Material has a soft inner lining that will not scratch the surface of your vehicle
• Built-in strap and buckle system keeps cover secure
• This car cover is made from 3 durable layers that will keep your vehicle protected
• Full elastic hem creates a comfortable fit

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• Universal Fit
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
• 133dB @ 4″, 12V

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive
• Backed By A Limited Lifetime Warranty

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For A Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

GM Genuine Parts Turn Signal Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The Am-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

• Features corrosion resistant steel housing and universal mounting bracket.
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
• Available in high and low tone
• 125 @ 4″, 12V

The AM-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

• Features corrosion resistant steel housing and universal mounting bracket.
• Available in high and low tone
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle with 12 volt application
• 125dB @ 4″, 12V

These universal horn accessories are ideal for applications requiring a horn where a horn was not originally provided or to replace a horn where the application no longer is available.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

The Original DashMat is America’s #1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

GM Genuine Parts Turn Signal Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies