1990 Jeep Wrangler Fuel and Emissions Systems

Essential 1990 Jeep Wrangler Fuel and Emissions Systems

Delphi – Electric Fuel Pump: With Clamps, Hose Piece, Isolator, Seal, Splices, 2-Wire Harness w/Connector (Part No.FE0300)

Electric Fuel Pump: With Clamps, Hose Piece, Isolator, Seal, Splices, 2-Wire Harness w/Connector

from

$149.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

NTK – Air Charge Temperature Sensor (Part No.AJ0019)

Air Charge Temperature Sensor

from

$27.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
  • The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1073)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$6.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NTK – Manifold Absolute Pressure Sensor (Part No.MA0114)

Manifold Absolute Pressure Sensor

from

$89.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010117237ND)

First Time Fit Oxygen Sensor

from

$65.98
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. X 28 In. – Paper/ Aluminum (Part No.96034)

Carburetor Pre-Heater Hose - 2 In. X 28 In. - Paper/ Aluminum

from

$15.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12403)

Fuel Cap Tester Adapter

from

$29.49
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Spectra Premium – Fuel Tank (Part No.JP1E)

Fuel Tank

from

$116.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Carquest Premium – Idle Speed Control Motor Connector (Part No.PTA1437)

Idle Speed Control Motor Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel Injector Connector (Part No.AC761)

Fuel Injector Connector

from

$36.49
Pigtail connector allows replacement of damaged fuel injector connector.
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS005)

Fuel Injector Seal Kit

from

$3.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Crown Auto Jeep Replacmnt – With Fuel Pump Filter/ Wiring Harness/ Hose Clamp (Part No.53003341X)

With Fuel Pump Filter/ Wiring Harness/ Hose Clamp

from

$149.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Limited 12 Month Or 12,000 Mile Warranty
See More

Carquest Premium – Locking Fuel Cap (Part No.10592)

Locking Fuel Cap

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Omix – Map Sensor (Part No.17223.02)

Map Sensor

from

$242.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Plastic
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGE2603)

Exhaust Gas Recirculation (EGR) Valve

from

$294.99
Exhaust Gas Recirculation (EGR) Valve

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J5360058)

OE Replacement

from

$21.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

DENSO – Oxygen Sensor: Downstream, 4 Wire, 9.65" Long, Heated, Exact Fit (Part No.234-4229)

Oxygen Sensor: Downstream, 4 Wire, 9.65" Long, Heated, Exact Fit

from

$56.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Dorman – Fuel Tank Strap Set (Part No.578-358)

Fuel Tank Strap Set

from

$55.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:
  • Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
  • Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Delphi – Fuel Pump Strainer (Part No.FS0120)

Fuel Pump Strainer

from

$11.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Omix – Fuel lnjector (Part No.17714.12)

Fuel lnjector

from

$73.99
Fuel injectors are responsible for getting gasoline into the engine in a precise and carefully engineered pattern. If your engine no longer runs smoothly, is experiencing sputtering, or has suffered a loss of performance, these might be signs that suggest

Product Features:
  • Sold Individually
  • 6 Needed Per Engine
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Fuel Pressure Regulator (Part No.17711.01)

Fuel Pressure Regulator

from

$113.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Brass
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Fuel Tank Lock Ring (Part No.579-127)

Fuel Tank Lock Ring

from

$78.99
A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:
  • Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
  • Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience
See More

Omix – Screw; Vapor Caniste (Part No.17258.13)

Screw; Vapor Caniste

from

$1.49
Screw; Vapor Caniste

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582931)

Fuel Tank Lock Ring

from

$16.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

Dorman – Fuel Tank O-Ring (Part No.911-245)

Fuel Tank O-Ring

from

$39.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
  • Durable construction – recommended for replacement when the fuel pump or sensor is replaced
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

1990 Jeep Wrangler Fuel and Emissions Systems

You count on your 1990 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 76 Fuel and Emissions Systems ranging in price from $1.49 to $1,007.99, you’re sure to find everything you need for your 1990 Jeep Wrangler.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Felpro, Bosch, and Delphi. 1990 Jeep Wrangler Fuel and Emissions Systems start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,766 extensive product reviews on 1990 Jeep Wrangler Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit with 4.1 stars and MAP Sensor with 4.8 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1990 Jeep Wrangler below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1990 Jeep Wrangler

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like Felpro, Bosch, Delphi, and even more.

Popular Carquest Premium Fuel and Emissions Systems

You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 1990 Jeep Wrangler back on the road. Some of the top-rated Carquest Premium products in these categories are:
Locking Fuel Cap
from $21.99
(3)
Locking Fuel Cap
Gas Caps

FAQs for 1990 Jeep Wrangler Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1990 Jeep Wrangler?

Out of 76 Fuel and Emissions Systems for the 1990 Jeep Wrangler, the most popular in our inventory are:
Fuel Pump Mounting Gasket
from $2.99
(26)
Fuel Pump Mounting Gasket
Fuel Pump Block-Off Plate Gaskets
Exhaust Gas Recirculation (EGR) Valve Gasket
from $1.99
(27)
Exhaust Gas Recirculation (EGR) Valve Gasket
EGR Valve Gaskets

What are the top-rated 1990 Jeep Wrangler Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1990 Jeep Wrangler based on customer reviews/ratings are:
Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
from $32.99
(31)
Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
“Been installed for a week. CEL is still off.”
MAP Sensor
from $65.05
(12)
MAP Sensor
“Great Price”
NTK Oxygen Sensor
from $39.24
(5)
NTK Oxygen Sensor
“This was a direct fit for my 88 S10 Blazer 2.8 ltr . NUT SIZE was 7/8th inch. It comes with anti-sieze on the threads. Fist time I had changed one out”