from

$23.99

Trans Fluid Additive

from

$12.99

High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:

Better Wear Protection
Increased Protection against Low Speed Pre-Ignition
Increased Fuel Efficiency
Better Protection for Vehicle Exhaust Emissions Equipment
Improved Compatibility with Fuels Containing Ethanol
Superior Corrosion Protection
Made in USA

from

$9.99

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

from

$11.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Extends engine life: Valvoline Full Synthetic High Mileage with MaxLife Technology is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown

from

$14.99

Prestone® MAX Asian Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for Asian vehicle manufacturers: Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Kia, Hyundai, Subaru, Mazda, Suzuki and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

100,000 Mile Fluid Life. Synthetic Formula for longer life and more protection
MAX + Stop Leak. Stop Leak Additives to prevent and stop power steering system leaks.
For use in Asian vehicle manufacturers: Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Kia, Hyundai, Subaru, Mazda, Suzuki and others
2X Anti-Wear Protection for enhanced System Life vs. conventional fluid. More protection against pump failure, squeals and clogs

from

$6.99

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Includes Stop Leak Additives to prevent and stop power steering system leaks.
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
Conventional Formula – For use in all manufacturers

from

$10.49

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Includes Stop Leak Additives to prevent and stop power steering system leaks.
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
Conventional Formula – For use in all manufacturers

from

$9.99

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
For use in all manufacturers
Conventional Formula – For use in all manufacturers

from

$12.49

Prestone® MAX DOT 3 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 100,000 mile fluid life, our longest life fluid has 2X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 3, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 3 is safe to use in all DOT 3 braking systems, ABS, disc or drum, and can mix with any DOT 3 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 3. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

100,000 Mile Fluid Life
Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
Superior Protection in Extreme Braking Conditions
Synthetic, Long Life Formula – 2X Longer than regular Prestone DOT 3

from

$5.99

Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

50,000 Mile Fluid Life
Prevent Overheating & Brake Fade with High Grade Formula*
Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
Synthetic, Extended Fluid Life Formula

from

$11.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs

from

$66.99

Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:

Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
Reduces friction and metal-to-metal contact for peak engine performance
Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up

from

$36.99

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

from

$7.99

Quaker State Full Synthetic Motor Oil SAE 5W-30 contains the most powerful formulation in the Quaker State portfolio. This product offers superior resistance to thermal and viscosity breakdown compared to Quaker State Synthetic Blend Motor Oil. As the engine temperature increases, the heat activated shear stable viscosity modifiers work to maintain oil film thickness that is necessary to prevent engine parts from metal on metal contact which helps extend engine life. This motor oil maintains its viscosity from start to finish, which means it stays in the grade specified by the car manufacturer throughout the recommended oil drain interval. The product also contains special detergents and dispersant additives that are designed to neutralize the harmful acids generated by the combustion process. This helps prevent the formation of sludge and deposits from forming on crucial engine parts. These properties of Quaker State Ultimate Durability full synthetic motor oil make it reliable and suitable for use in high performance vehicles such as sport cars, SUVs, trucks and minivans. It is compatible with biofuels, ranging from E10 to E85 and suitable for hybrid vehicles.

Product Features:

Quaker State Ultimate Durability is our most powerful formulation, providing extreme engine performance and protection against deposits, which allows your engine to operate at maximum horsepower
No leading synthetic motor oil provides better protection from friction-related wear when compared to industry standard Sequence IVA engine test results
Helps protect against the effects of low-speed pre-ignition (LSPI) in modern turbocharged engines.
Provides excellent protection against the formation of sludge and other harmful deposits when compared to Quaker State Synthetic Blend Motor Oil
Superior lubrication flow and pumpability at high and low temperatures when compared to Quaker State Synthetic Blend Motor Oil

from

$13.99

Fram Extended Life AMAM Concentrate is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up & boil-over protection.

Product Features:

Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT
5 Yr., 150,000 mile Extended life formula.
Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

from

$22.99

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
Formulated for long life performance
Low-silicate, low-pH and phosphate-free formula
Helps protect all cooling system metals, including aluminum

from

$10.99

FRAM Extended Life AMAM 50/50 is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. Top-off your cooling system with FRAM Extended Life AMAM 50/50, which is a blend of 50% antifreeze and 50% demineralized water. FRAM 50/50 meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up & boil-over protection.

Product Features:

Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT.
5 Yr., 150,000 mile Extended life formula.
Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

from

$18.99

FRAM Conventional Green Concentrate is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. When used as directed, the Prime Green Concentrate Low Silicate formula provides full protection for a minimum of one year.

Product Features:

Low Silicate Formula
When used as directed, will provide protection for a minimum of 1 year
Meets or exceeds ASTM requirements for cars, light duty trucks
Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

from

$28.99

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also recommended for transmissions, power steering systems, and hydraulic systems requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

Good foam and corrosion prevention
Safe for seals
Promotes smooth shifting
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$49.99

Castrol Transmax High Mileage is specially formulated for transmissions with over 75,000 miles to deliver superior performance for maximum transmission life. It features additional seal conditioners to help stop leaks and cleaning agents to reduce varnish and deposit formation. It also protects against clutch wear and restores smooth shifting and can be used in a wide variety of specifications including DEXRON®-IIIH, MERCON® and JASO-1A.

Product Features:

Additional seal conditioners help stop leaks.
Extra cleaning agents reduce varnish and sludge formation.
Protects against clutch wear and restores smooth shifting.
Recommended for use in new & older vehicles that require:

from

$8.79

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also recommended for transmissions, power steering systems, and hydraulic systems requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

Good foam and corrosion prevention
Safe for seals
Promotes smooth shifting
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions whe

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$7.99

Castrol® Transmax DEX/MERC includes enhanced friction durability for smooth transmission performance. Designed for use in older Ford and GM vehicles.

Product Features:

Enhanced friction durability for smooth transmission performance
Meets DEXRON®-III H requirements; also satisfies requirements of DEXRON®, DEXRON®-III, IIE, and II; do not use this ATF in applications calling for DEXRON®-VI
Meets MERCON® requirements; may also be used in power steering applications where MERCON® is required; use Castrol Type F ATF in applications calling for Type F
Do not use this ATF in applications calling for MERCON® V or MERCON® SP

from

$14.29

Mobil 1 Synthetic ATF is a multi-vehicle, fully synthetic automatic transmission fluid that helps to improve overall transmission durability and cleanliness. Has exceptional thermal and oxidation stability and long-term frictional properties that help to improve and extend transmission efficiency, smooth shifting performance, and fuel economy. Mobil 1 ATF provides excellent low-temperature fluidity to promote reliable lubrication at temperatures down to -51C, and exceptional shear stability to help supports viscosity retention under the most severe heavy-duty, high-temperature operating conditions. Compatibile with mineral ATF fluids and all common seal materials to help provide excelent leakage control and reduce concern in top-off emergencies. Meets or exceeds the requirements of JASO 1-A and Ford MERCON V.

Product Features:

Multi-vehicle, fully synthetic automatic transmission fluid that helps to improve overall transmission durability and cleanliness
Exceptional thermal and oxidation stability to improve and extend transmission efficiency, smooth shifting performance, and fuel economy
Excellent high and low-temperature fluidity to help support viscosity retention under extreme, heavy-duty operating conditions
Compatibile with mineral ATF fluids and all common seal materials to help provide excelent leakage control
Meets or exceeds the requirements of JASO 1-A and Ford MERCON V
Manufacturer Part Number: 112980

1990 Honda Prelude Fluids and Chemicals

More 1990 Honda Prelude Fluids and Chemicals Categories

Essential 1990 Honda Prelude Fluids and Chemicals

ATP – Trans Fluid Additive (Part No.AT-203)

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-40 Engine Oil: Maximize Engine Life, 1 Quart (Part No.797977)

Valvoline – Full Synthetic High Mileage with MaxLife Technology 10W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV180)

Prestone – MAX Power Steering Fluid: Asian Vehicles, With Stop Leak, Restores Seals, 100k miles, 12 oz (Part No.AS279)

Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 12 oz (Part No.AS262)

Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz (Part No.AS263Y)

Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)

Prestone – DOT 3 Brake Fluid: MAX Synthetic, Highest Grade, Superior Protection, 100k miles, 32 oz (Part No.AS410)

Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 12 oz (Part No.AS400)

Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV179)

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Motor Oil (5 Quart) (Part No.11748)

Valvoline – Advanced Full Synthetic 5W-30 Motor Oil: Maximizes Engine Life, 5 Quart (Part No.881164)

Quaker State – 5W-30 Full Synthetic Motor Oil, 1 Quart (Part No.550046169)

FRAM – Antifreeze & Coolant: 50/50 Ready To Use, OE North American Gold, 1 Gallon (Part No.F301)

ZEREX – G05® Full Strength Concentrate Antifreeze / Coolant, 1 Gallon (Part No.ZXG051)

FRAM – Extended Life AMAM Antifreeze 50/50 Ready-to Use, 1 Gallon (Part No.F401)

FRAM – Antifreeze & Coolant: Concentrate, Conventional Green, 1 Gallon (Part No.F101)

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Gallon (Part No.F420-1G)

Castrol – Transmax ATF High Mileage Automatic Transmission Fluid: 1 Gallon (Part No.1599F1)

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F420)

Idemitsu – Type TLS Automatic Transmission Fluid, 1 qt (Part No.30040093-75000C)

Castrol – Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart) (Part No.15ADFA)

Mobil 1 – Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.25201)

Popular 1990 Honda Prelude Fluids and Chemicals Categories

1990 Honda Prelude Fluids and Chemicals

Top-Rated Fluids and Chemicals Brands For Your 1990 Honda Prelude

Popular Castrol Fluids and Chemicals

Top-Rated Valvoline Fluids and Chemicals

FAQs for 1990 Honda Prelude Fluids and Chemicals

What are the most purchased Fluids and Chemicals for the 1990 Honda Prelude?

What are the top-rated 1990 Honda Prelude Fluids and Chemicals?

More Popular Parts for All Makes