1990 Honda Accord Fuel and Emissions Systems

Below you will find various in-demand Honda Fuel and Emissions Systems, components and accessories for your 1990 Accord. Advance Auto Parts has popular Accord parts like Gas Caps, Air Flow Sensors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Accord model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1990 Honda Accord Fuel and Emissions Systems below and start saving instantly.

Popular 1990 Honda Accord Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pump Hanger Assemblies

Idle Air Parts

Pressure Regulators

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Filler Necks

Secondary Air Injection Relays

Fuel Pump Tank Seals

Idle Solenoids

Fuel Injector O-rings

EGR Valve Gaskets

Fuel Cap Tester Adapters

Nozzle Holders

Fuel Line Seal Rings

Essential Fuel and Emissions Systems for 1990 Honda Accords

from

$96.24

Idle Control Valve

from

$16.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$109.09

For more than a century, Delphi has been making the parts cars are born with. Delphi is proud of its OE heritage, and over the years they have used that experience to expand into a global aftermarket supplier.

Product Features:

Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation
No audible regulator noise
Consistent and predictable fuel pressure throughout system range of control provides great drivability.

from

$17.49

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$149.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$33.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$62.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$1.25

Fuel Injector O-Ring

from

$34.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$3.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$98.99

from

$69.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$284.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$161.99

New Standard Replacement Fuel Filler Neck

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$139.99

CARQUEST fuel pump hanger assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$79.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$2.52

Fuel Injector O-Ring

from

$2.08

Fuel Injector Holder

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$59.99

from

$49.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$5.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$5.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump seals meet or exceed the performance of the original equipment they replace.

Product Features:

Designed to OE fit, form and function
Application specific design ensure a perfect fit guarantee
OEM design ensures corrosion resistance and prevents leakage
Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
Rigorous ISO quality control process

from

$17.79

Fuel Pump Tank Seal

Upgrade your 1990 Honda Accord with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1990 Honda Accord, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Accord functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Fuel and Emissions Systems for the 1990 Honda Accord, designed to meet your needs without breaking the bank. From Gas Cap replacements to Air Flow Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1990 Honda Accord at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.25 to $320.17, with an average price of $65.22. Our 68 Fuel and Emissions Systems in stock come from 17 trusted brands, so you’re sure to find the right part for your 1990 Honda Accord without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Honda Accord, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch Carquest Premium, and more. Bosch Fuel and Emissions Systems start at just $32.99 and boast an impressive 5 stars average rating from customers. With 3,630 customer reviews and counting, our 1990 Honda Accord Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Honda Accord is always ready to roll. We’re committed to providing you with everything you need to keep your Accord in top shape, all in one place. Start shopping confidently below for your 1990 Honda Accord!

Best-Selling Gas Caps for 1990 Honda Accords

Enhance the driving experience in your Honda with 12 quality Gas Cap components, starting at $6.99.

show more show less

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

Most Popular 1990 Honda Accord Air Flow Sensors

Customize your Honda with 3 Air Flow Sensors products like Air- Fuel Ratio Sensors, all priced under $81.68.

show more show less

from

$56.65

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$81.68

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$61.38

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

Top Picks for 1990 Honda Accord Fuel Pumps

Upgrade Honda Accords with top-quality Fuel Pumps parts, including 12 OEM and aftermarket selections for your 1990 model.

show more show less

from

$53.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$8.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$78.99

New Platinum Pro Electric Fuel Pump, New Strainer Required For Warranty

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$138.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$108.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$73.99

from

$188.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$320.17

Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:

Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
Single stage turbine pump provides quiet, energy efficient operation
Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
High capacity filter media helps supply clean fuel to the injection system
Available serviceable in-tank fuel filter for markets with poor quality fuels

from

$219.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$115.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.Optimized, precision-wound armature assembly for increased performance

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Oxygen Sensors for 1990 Honda Accords

Select from 9 premium Oxygen Sensors parts for your 1990 Honda Accord, with prices ranging from $32.99 to $81.99.

show more show less

from

$80.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$48.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$56.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$64.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$32.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$80.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$77.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$81.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$62.86

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

Most Sold 1990 Honda Accord Fuel Injectors

Explore our best-selling Honda parts for the 1990 Accord among 14 OEM and aftermarket options starting from $1.25.

show more show less

from

$20.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Premium materials provide tight seal for injectors which prevents fuel leaks
High quality construction for durability
Constructed to withstand an engine environment
Application specific for this vehicle

from

$68.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

from

$41.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$128.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$111.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$104.55

The FIC fuel injectors are completely remanufactured and are fully tested to exceed OEM specifications. Remanufacturing Process

Product Features:

All fuel hose, external seals, filter, pintle cap, etc. are removed.
Fuel injector is then fully disassembled.
All components are checked to meet OEM specifications and cleaned.
Coil is replaced with New FIC Coil.
All internal seals are replaced.
Injector is re-assembled and calibrated The injector is fully tested for:
Coil resistance
Spray pattern
Fuel delivery – static and dynamic
Leak test
Once the injector meets all OEM specifications, the filter, pintle cap, all external seals, hose and hose ferrules are replaced.

from

$39.99

Fuel Injector Repair Kit

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$2.91

Fuel Injector Seal

from

$2.38

Fuel Injector Seal

from

$2.08

Fuel Injector Holder

from

$1.25

Fuel Injector O-Ring

Top-Rated Fuel and Emissions Systems Brands For Your 1990 Honda Accord

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1990 Honda Accords. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1990 Accord start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 1990 Honda Accord Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1990 Honda Accord, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 1990 Honda Accord. With over 4 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $32.99, with an average price of just $62.16. Plus, with over 247 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$80.99

(144)

Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal

“Good”

from
$32.99

(13)

Oxygen Sensor: 4 Wire, 22.83" Long, Heated, Exact Fit

“very easy to install comes with the correct Honda factory connections for a seamless installation”

from
$56.65

(3)

Bosch Oxygen Sensor

“This product was simple to install and great price.”

Popular Carquest Premium 1990 Honda Accord Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1990 Honda Accord owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1990 Accord, Advance Auto Parts carries a full inventory of 24 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Honda in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $6.99 to $228.99, plus, with more than 405 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$7.49

This product is not rated

Exhaust Gas Recirculation (EGR) Valve Gasket

“”

from
$8.99

This product is not rated

Fuel Pump Strainer FS2510487

“”

from
$10.99

This product is not rated

Keyed Alike Locking Fuel Cap

“”

FAQs for 1990 Honda Accord Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1990 Honda Accords?

Out of 68 Fuel and Emissions Systems that fit 1990 Honda Accords, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (18730541) – $80.99
Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (19370039) – $77.99

What’s the price range for 1990 Honda Accord Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1990 Honda Accord start at $1.25 and go up to $320.17 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1990 Honda Accord?

The average price for Fuel and Emissions Systems for the 1990 Honda Accord is $65.22. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Honda Accord model years?

Yes, we currently carry Fuel and Emissions Systems for 47 model years of Honda Accords between 1976 and 2023. Fuel and Emissions Systems are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 1990 Honda Accord?

The cheapest 1990 Honda Accord Fuel and Emissions Systems we carry in stock are:

Fuel Injector O-Ring (10740395) – $1.25
Exhaust Gas Recirculation (EGR) Valve Gasket (3207781) – $1.99
Fuel Injector Holder (11844922) – $2.08
Fuel Injector Seal (10740370) – $2.38
Stone EGR Valve Gasket (10739860) – $2.51

What are the top-rated Fuel and Emissions Systems that fit the 1990 Honda Accord?

Out of 3,630 reviews by customers, our 1990 Honda Accord Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1990 Honda Accord and their top-rated products:

Oxygen Sensors
- Switching Oxygen Sensor: 4 Wire, 12.75" Long, Heated, Direct Fit (20472174) – $80.99
- Switching Oxygen Sensor: 4 Wire, 16.25" Long, Heated, Direct Fit (20472164) – $48.99
- Oxygen Sensor: 4 Wire, 20.28" Long, Heated, Exact Fit (20471942) – $56.99
Air Flow Sensors
- Switching Oxygen Sensor: 4 Wire, 12.75" Long, Heated, Direct Fit (20472174) – $80.99
- Switching Oxygen Sensor: 4 Wire, 16.25" Long, Heated, Direct Fit (20472164) – $48.99
- Oxygen Sensor: 4 Wire, 20.28" Long, Heated, Exact Fit (20471942) – $56.99

What types of Fuel and Emissions Systems do you sell for my 1990 Honda Accord?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1990 Honda Accord:

Can I get help with 1990 Honda Accord Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Fuel and Emissions Systems and more.

What is your return policy for Honda Accord Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Honda Accord Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Honda Accord Fuel and Emissions Systems

Walker Products – Idle Control Valve (Part No.C4030168995WKR)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Delphi – Fuel Pressure Regulator (Part No.C30002148902DEL)

Delphi – Fuel Pump Strainer (Part No.FS0009)

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 13.78" Long, Heated, Exact Fit (Part No.234-9091)

Carquest Premium – Multi Purpose Relay (Part No.RAA1259)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1567)

Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)

Carquest – Fuel Tank Straps (Includes 2 Straps) (Part No.578-189)

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (Part No.217-3366)

Carquest Premium – Fast Idle Valve Solenoid (Part No.ABA1961)

Carquest Premium – Fuel Pump (Part No.E259481)

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.71217)

Carquest – Steel Fuel Tank (Part No.576-971)

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 97057)

KAI – Fuel Filler Neck (Part No.TNKFN500)

Spectra Premium – Hanger Assembly; Includes Pump, Sender, and Strainer (Part No.SP8349H)

NTK – Switching Oxygen Sensor: 4 Wire, 21.25" Long, Heated, Direct Fit (Part No.24475)

Ishino – Fuel Injector O-Ring (Part No.C1012404811ISH)

Ishino Stone – Fuel Injector Holder (Part No.C1030118660ISH)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Multi Purpose Relay (Part No.RAA1772)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1954)

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)

Spectra Premium – Fuel Pump Tank Seal (Part No.LO24)

GMB – Fuel Pump Tank Seal (Part No.E3004276128GMB)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Bosch – Bosch Oxygen Sensor (Part No.C501088407BOS)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010112345ND)

NTK – NTK Oxygen Sensor (Part No.C501062896NTK)

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E259218)

Carquest Premium – Fuel Pump Strainer FS2510487 (Part No.FS2510487)

KAI – Electric Fuel Pump (Part No.FMD010084)

Delphi – Electric Fuel Pump: With Hose Clamps, Hose Piece, Isolator, Pall Nut, Seals (Part No.FE0486)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.E635399)

Carquest Premium – Multi Purpose Relay (Part No.RAA1255)

Carquest Premium – Fuel Pump Hanger Assembly HS211959: Fuel Pump and Strainer (Part No.HS211959)

Delphi – Series 7000 Fuel Module (Part No.E300163352DEL)

Delphi – Fuel Pump Hanger Assembly: Without Float Arm (Part No.HP10203)

Spectra Premium – Fuel Pump (Part No.SP1129)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

NTK – Switching Oxygen Sensor: 4 Wire, 12.75" Long, Heated, Direct Fit (Part No.24169)

NTK – Switching Oxygen Sensor: 4 Wire, 16.25" Long, Heated, Direct Fit (Part No.24042)

DENSO – Oxygen Sensor: 4 Wire, 20.28" Long, Heated, Exact Fit (Part No.234-4621)

DENSO – Oxygen Sensor: Upstream, 4 Wire, 9.25" Long, Heated, Exact Fit (Part No.234-4095)

Bosch – Oxygen Sensor: 4 Wire, 22.83" Long, Heated, Exact Fit (Part No.13007)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15730)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4209)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010100900ND)

Carquest – Fuel Injector Seal Kit (Part No.274621)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60778)

Beck/Arnley – Fuel Injector O-Ring Kit (Part No.158-0895)

Carquest – Fuel Injector (Part No.57788)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1144)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10419)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1010)

Fuel Injection Corp – Fuel Injector, Remanufactured (Part No.C100046763FIC)

Wells Vehicle Electronics – Fuel Injector Repair Kit (Part No.2G1955)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 94665)

Ishino – Fuel Injector Seal (Part No.C1010118656ISH)

OPT – Fuel Injector Seal (Part No.C1010118656OPT)

Ishino Stone – Fuel Injector Holder (Part No.C1030118660ISH)

Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)