1990 Ford Country Squire Cooling and Climate Controls

Name: A/C Condenser
Brand: Carquest Premium
SKU: 1060
Price: 145.99 USD

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 1990 Country Squire. Advance Auto Parts has popular Country Squire parts like Engine Cooling Parts, Air Conditioning Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Country Squire model years including 1974, 1977, 1978, 1983, 1986, 1987, 1988, 1989, 1991 and more. Select a category of 1990 Ford Country Squire Cooling and Climate Controls below and start saving instantly.

Popular 1990 Ford Country Squire Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

AC Compressor Relays

Coolant Temperature Sensors

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Water Outlets

Blower Motor Resistors

Air Conditioning Relays

AC Condensers

AC Line O-Rings

AC Compressor Cut-Out Relays

AC Liquid Lines

Thermostat Housing Gaskets

AC Compressor Cut-Out Relay Harness Connectors

AC Clutch Coil Connectors

Accumulator and Receiver Driers

AC Line O-Ring Kits

AC Clutch Bearings

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

AC Suction Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Hose Assemblies

AC Clutch Cycle Switches

Blower Relays

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Switch Connectors

AC Compressor Clutch Connectors

Coolant Temp Sending Unit Switch Connectors

Radiator Cap Adapters

AC Compressor Seals

AC System Seal Kits

AC Line Clip

HVAC Temperature Delay Relay Harness Connectors

Water Pump Pulley Bolts

Essential Cooling and Climate Controls for 1990 Ford Country Squires

from

$145.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$16.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$22.99

Belt-Driven Fan Spacer Kit

from

$27.49

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$11.99

This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$46.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$14.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$30.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$54.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$31.49

Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:

Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$16.29

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$23.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$50.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$11.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$6.99

This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. A

Product Features:

This pump is used on accessory belt driven applications
Used mostly on models equipped with a fan clutch
It is highly recommended that the fan clutch be replaced with the water pump
All gaskets or seals necessary for installation are supplied with pump
Durable housing features precisely machined mounting surfaces for proper sealing

from

$26.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$20.79

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$21.00

A/C O-Ring Kit

Upgrade your 1990 Ford Country Squire with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1990 Ford Country Squire, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Country Squire functioning at its best. At Advance Auto Parts, we offer a wide selection of 100 Cooling and Climate Controls for the 1990 Ford Country Squire, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1990 Ford Country Squire at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $569.99, with an average price of $45.29. Our 100 Cooling and Climate Controls in stock come from 22 trusted brands, so you’re sure to find the right part for your 1990 Ford Country Squire without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Ford Country Squire, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Dorman, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $4.49, and at an average 4 stars rating. With 2,510 customer reviews and counting, our 1990 Ford Country Squire Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Ford Country Squire is always ready to roll. We’re committed to providing you with everything you need to keep your Country Squire in top shape, all in one place. Start shopping confidently below for your 1990 Ford Country Squire!

Best-Selling Engine Cooling Parts for 1990 Ford Country Squires

Enhance the driving experience in your Ford with 44 quality Engine Cooling Part components, starting at $2.99.

show more show less

from

$14.29

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$62.99

This pump is used on accessory belt driven applications
Used mostly on models equipped with a fan clutch
It is highly recommended that the fan clutch be replaced with the water pump
All gaskets or seals necessary for installation are supplied with pump
Durable housing features precisely machined mounting surfaces for proper sealing

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$9.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$16.79

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$179.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$55.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$19.99

Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:

Chrome Plated
This Is A 45 Degree Neck
Comes With O-ring And Bolts
Has Small Hose Fitting On It

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$6.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$19.49

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$47.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$7.28

The Motorcraft Original Equipment Radiator Cap is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

Standard and safety vent radiator pressure caps available
Extensive coverage for most cars and trucks, as well as farm and construction equipment
Swivel-seal radiator caps are designed to provide increased durability and can be removed without damage to the rubber atmospheric seal
Zinc-plated to resist corrosion and rust
Pressure valve springs are made of stainless steel to maintain calibrated pressure throughout the service life
Rubber pressure valve gasket resists high temperatures and deterioration from coolant and additives
Pressure and vacuum relief features help extend radiator and hose life
Prevent accidental cap removal with positive low-pressure stop feature

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$13.99

This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles.
Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.79

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$27.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$46.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$15.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$14.29

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$12.49

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$47.19

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$47.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$24.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$39.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$569.99

27 in. Electric Fan

from

$461.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

from

$119.99

Trimline Straight Blade Electric Fan

from

$51.45

Motorcraft Water temperature sensors are designed for durability and electrical performance. Motorcraft digital Water temperature sensors are designed to work with Ford and Lincoln transmissions and engine control computers.

Product Features:

Sensors are tested according to Ford Motor Company noise, vibration and harshness (NVH) engineering standards
Recommended by Ford Motor Company

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$32.99

Mr. Gasket’s molded rubber water outlet/thermostat housing gasket is reusable. This gasket is composed of an aluminum carrier with a molded silicone insert to ensure the micro seal of engine coolant. Seals surface irregularities between intake manifold and water outlet/ thermostat housing. Compatible with all intake manifold materials. Can be used with OE replacement or aftermarket chrome water outlets utilizing a composition gasket or rubber O-ring. Requires no gasket sealer for installation. Ideal for engines that require constant dis-assembling maintenance, great for shops with engine dynos.

Product Features:

Composed of an aluminum carrier with a molded silicone insert to ensure the micro seal of engine coolant
Seals surface irregularities between intake manifold and water outlet/thermostat housing
Compatible with all intake manifold materials
Can be used with OE replacement or aftermarket chrome water outlets utilizing a composition gasket or rubber O-ring
Does not require gasket sealer for installation

from

$22.99

Belt-Driven Fan Spacer Kit

from

$21.99

Edelbrock #7253 Engine Water Pump Gasket Set Ford 289-302. Is it time to rebuild your Edelbrock mechanical water pump? No problem– these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and ca

Product Features:

Composite Material
1-Back Plate To Timing Cover
1-Water Pump To Timing Cover
2-Back Plate To Water Pump
For Early SB Ford

from

$21.99

Edelbrock #7254 Engine Water Pump Gasket Set Ford 5.0. Is it time to rebuild your Edelbrock mechanical water pump? No problem– these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be

Product Features:

Composite Material
1-Back Plate To Timing Cover
1-Water Pump To Timing Cover
1-Back Plate To Water Pump
For SB Ford

from

$13.20

Thermostat

Most Popular 1990 Ford Country Squire Air Conditioning Parts

Customize your Ford with 40 Air Conditioning Parts products like AC Compressor With Clutch, Expansion Valve and Orifice Tubes, and AC Condensers, all priced under $306.99.

show more show less

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$26.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$27.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$15.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$4.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$20.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$28.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$24.29

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$18.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$104.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$28.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$16.29

from

$19.29

Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.29

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$306.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$16.29

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$145.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$68.99

BEARING

from

$59.99

New Standard Replacement A/C Accumulator, V8 Engine

Product Features:

V8 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$54.99

BEARING

from

$50.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$42.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$24.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Application specific design
Color coded

from

$21.00

A/C O-Ring Kit

from

$19.99

New Standard Replacement A/C System Seal Kit, MT2520, L4 Engine

Product Features:

MT2520, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$18.79

from

$10.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$2.42

A/C Orifice Tube

Top Picks for 1990 Ford Country Squire Blower Motor and Related Products

Upgrade Ford Country Squires with top-quality Blower Motor and Related Products parts, including 10 OEM and aftermarket selections for your 1990 model.

show more show less

from

$24.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Durable Plastic Material
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Retainer clip installation

from

$22.05

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$23.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$39.49

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$39.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$22.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$31.49

Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$24.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$11.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$73.51

Blower Motor

In-Demand Heating Parts for 1990 Ford Country Squires

Select from 4 premium Heating Parts parts for your 1990 Ford Country Squire, with prices ranging from $34.49 to $76.08.

show more show less

from

$56.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$76.08

Heater Core

from

$65.25

Heater Core

from

$34.49

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

Most Sold 1990 Ford Country Squire Blend Doors

Explore our best-selling Ford parts for the 1990 Country Squire among 1 OEM and aftermarket options starting from $57.99.

show more show less

from

$57.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Top-Rated Cooling and Climate Controls Brands For Your 1990 Ford Country Squire

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1990 Ford Country Squires. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 1990 Country Squire start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1990 Ford Country Squire Cooling and Climate Controls

When it comes to maintaining or upgrading your 1990 Ford Country Squire, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1990 Ford Country Squire. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 1990 Ford Country Squire Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1990 Ford Country Squire owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1990 Country Squire, Advance Auto Parts carries a full inventory of 35 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $4.99 to $306.99, plus, with more than 624 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$14.29

This product is not rated

Radiator Cap Tester Adapter

“”

from
$22.99

This product is not rated

HVAC Blower Motor Resistor Connector

“”

from
$19.99

This product is not rated

Multi Purpose Relay

“”

FAQs for 1990 Ford Country Squire Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1990 Ford Country Squires?

Out of 100 Cooling and Climate Controls that fit 1990 Ford Country Squires, the following parts are the top sellers:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Radiator Cap: 16 PSI (17110038) – $16.79
Engine Coolant Outlet Gasket (5781612) – $2.99

What’s the price range for 1990 Ford Country Squire Cooling and Climate Controls?

Cooling and Climate Control prices for the 1990 Ford Country Squire start at $0.99 and go up to $569.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1990 Ford Country Squire?

The average price for Cooling and Climate Controls for the 1990 Ford Country Squire is $45.29. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford Country Squire model years?

Yes, we currently carry Cooling and Climate Controls for 33 model years of Ford Country Squires between 1950 and 1991. Cooling and Climate Controls are bought most frequently for the following model years: 1991, 1989, 1988, 1987, 1986, 1983, 1978, 1977, and 1974.

What are the cheapest Cooling and Climate Controls for my 1990 Ford Country Squire?

The cheapest 1990 Ford Country Squire Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (18890254) – $0.99
Green Round O-Ring (18890169) – $1.99
Green Round O-Ring (18890841) – $1.99
A/C Orifice Tube (12611367) – $2.42
Engine Coolant Outlet Gasket (5781612) – $2.99

What are the top-rated Cooling and Climate Controls that fit the 1990 Ford Country Squire?

Out of 2,510 reviews by customers, our 1990 Ford Country Squire Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1990 Ford Country Squire and their top-rated products:

Engine Cooling Parts
- New Premium Water Pump (5420156) – $62.99
- Engine Water Pump Gasket (5180813) – $2.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
Blower Motor and Related Products
- New Premium Water Pump (5420156) – $62.99
- Engine Water Pump Gasket (5180813) – $2.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99

What types of Cooling and Climate Controls do you sell for my 1990 Ford Country Squire?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1990 Ford Country Squire:

Can I get help with 1990 Ford Country Squire Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford Country Squire Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford Country Squire Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Ford Country Squire Cooling and Climate Controls

Carquest Premium – A/C Condenser (Part No.1060)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10331)

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14556)

Carquest Premium – HVAC Vacuum Open Non-Bypass Heater Valve (Part No.T74604)

Factory Air – Green Round O-Ring (Part No.24650)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Carquest Premium – Heater Core (Part No.398012)

Carquest Premium – Blower Motor: Without Wheel (Part No.35504)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Carquest Premium – Fuel Pump Relay Connector (Part No.PTA1277)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

NTK – Air Charge Temperature Sensor (Part No.EF0016)

National – Bearings (Part No.5106-WCC)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1082)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1528)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Factory Air – Standard Relay (Part No.35928)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55740)

Carquest – A/C and Heater Relay (Part No.R3177)

Carquest Premium – HVAC Blower Motor Connector (Part No.PTA1343)

Carquest Premium – A/C Liquid Line Hose Assembly without Orifice Tube (Part No.T55644)

Dorman – 5-Wire Blower Switch (Part No.85150)

Carquest Premium – New Premium Water Pump (Part No.T3046)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36676)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84818)

Santech – A/C O-Ring Kit (Part No.R1151317274SII)

Motorad UltraStats – Thermostat: 192 Degrees (Part No.5244-192)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Felpro – Engine Water Pump Gasket (Part No.35211)

Carquest Premium – New Premium Water Pump (Part No.T3091)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10231)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10331)

Felpro – Engine Coolant Outlet Gasket (Part No.35440)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432170)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Carquest Premium – Universal Fan Clutch – 7" Thermal Regular Duty (Part No.215011)

Mr. Gasket – Water Neck (Part No.2662)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Dorman – Help – Radiator Drain Cocks (Part No.61127)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84831)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Motorcraft – Original Equipment Radiator Cap (Part No.G1010196371MTR)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Dorman – Help – Water Pump Stud Kit (Part No.23744)

Motorad – Standard Thermostat:: 192 Degrees (Part No.244-192)

Motorad – Standard Thermostat: 180 Degrees (Part No.244-180)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471B)

Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 192 Degrees (Part No.4831KT)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 60 Degree Neck Angle (Part No.902-1001)

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Carquest Premium – Universal Fan Clutch – Non-Thermal (Part No.211011)

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Carquest Premium – Connector (Part No.PTA1198)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10001)

Flex A Lite – 27 in. Electric Fan (Part No.295)

Edelbrock – Water Pump #8845 For Small-Block Ford 1986-93, 5.0L V8, Rev. Rotation, Polished (Part No.8845)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Motorcraft – Water Temperature Sensor (Part No.C6020415011MTR)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Mr. Gasket – Gaskets (Part No.737G)

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14538)

Edelbrock – Engine Water Pump Gasket Set for Ford 289-302 (Part No.7253)

Edelbrock – Engine Water Pump Gasket Set for Ford 5.0 (Part No.7254)

Autopart International Inc – Thermostat (Part No.G40001981703API)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36676)

Carquest Premium – A/C Accumulator (Part No.T33168)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Carquest Premium – A/C Blue Orifice Tube (Part No.T38621)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26715)

Carquest – A/C and Heater Relay (Part No.R3177)