1990 Chevrolet C1500 Performance and Racing Products

Essential 1990 Chevrolet C1500 Performance and Racing Products

Hypertech – Street Runner Power Computer Chip, 4 Speed Model Only (Part No.128021)

Street Runner Power Computer Chip, 4 Speed Model Only

from

$158.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:
  • Designed For Daily Street Driving
  • For Unmodified Vehicles w/Stock Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
  • Product might not be available in all states due to local laws.
See More

Hurst – Manual Shifter, Competition Plus Shifter (Part No.3910002)

Manual Shifter, Competition Plus Shifter

from

$534.99
The Hurst Competition Plus, the industry standard for over 30 years, used in dedicated applications to assure a custom fit to a wide variety of vehicles having factory consoles without any modifications.

Product Features:
  • High Ratio Pivot Mechanism
  • Adjustable Bias Spring Loads
  • Adjustable Stops
  • Chrome Plated Steel Bolt On Stick
  • Easy Installation
See More

Dynomax – 43661 Exhaust Pipe (Part No.43661)

43661 Exhaust Pipe

from

$26.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Single – 3in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17381)

Single - 3in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$306.99
DynoMax® Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
  • Dyno proven to flow up to 700 SCFM
See More

Accel – Adj:Vac Adv GM V8 Hei Dist (Part No.31035)

Adj:Vac Adv GM V8 Hei Dist

from

$48.49
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.

Product Features:
  • Adjustable Vacuum Advance
  • Increases Horsepower And Throttle Response
  • Includes Allen Wrench For Adjustments
  • Instantly Increase Horsepower
  • Maximum Possible Spark Advance
  • Not Legal For Sale/Use In CA
See More

Accel – Lts Rotor (Part No.130133)

Lts Rotor

from

$15.99
Regain horsepower and economy for your street machine with a new ACCEL performance rotor. ACCEL’s high quality manufacturing process results in rotors offering superior protection from arc-thru and crossfire.

Product Features:
  • Max Stability For All RPM Ranges
  • Heavy Duty For Maximum Energy Transfer
See More

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet

from

$306.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Competition Cams – Magnum Double Row Timing Set for ’65-’91 396-454 Chevrolet Big Block (Part No.2110)

Magnum Double Row Timing Set for '65-'91 396-454 Chevrolet Big Block

from

$104.99
COMP Cams Magnum Double Roller Timing Sets include induction hardened cast iron camshaft gears, billet steel crank sprockets and heavy-duty, heat-treated double roller timing chains. They feature 3 keyway crank sprockets for 4° incremental adjustability w

Product Features:
  • Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
  • Induction hardened cast iron camshaft gear & billet steel crank sprocket
  • Ideal for mild street performance
  • Heavy-duty, heat-treated double row timing chain; chain available separately
See More

Mr. Gasket – Vlvcvrset (Part No.6822G)

Vlvcvrset

from

$302.99
Fabricated from lightweight aluminum and features a smooth top with a baffled opening and long mounting bolts. Has 1/4 inch thick 1-piece mounting flange which ensures a flat mating surface along with aluminum tubes welded into the mounting holes to maintain rail flatness and increase valve cover strength. Includes mounting hardware.

Product Features:
  • Fits big block Chevy engines
  • Welded aluminum construction
  • 1/4″ thick 1-piece mounting flange for superior sealing
  • Includes mounting hardware
  • Tall design cover for added rocker clearance
  • Silver anodized finish
  • Has 1.25″ breather openings
  • Sold as a pair
  • These could have valvetrain interference issues if installing on Dart Pro 1 cylinder heads.
See More

Energy Suspension – Transmission Mount (Part No.3.1132G)

Transmission Mount

from

$89.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

Dynomax – Super Turbo Muffler Uni Fit Aluminized Steel 20" L, 2.5" In, 2.5" Out, Oval (Part No.17748)

Super Turbo Muffler Uni Fit Aluminized Steel 20" L, 2.5" In, 2.5" Out, Oval

from

$82.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
  • Dyno proven to flow up to 700 SCFM
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1420)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$149.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Mr. Gasket – Enhancement Products (Part No.4595)

Enhancement Products

from

$24.99
Dress up your engine for a customized look with these chrome plated covers. Note: For use with OEM style timing chain only. Double roller type chains or gear drives require checking for adequate clearance.

Product Features:
  • Timing chain cover
  • Chrome plated: skin packaged
See More

Fram – High Performance Spin-on Oil Filter: Ideal for Racing Oil (Part No.HP4)

High Performance Spin-on Oil Filter: Ideal for Racing Oil

from

$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.** 

Product Features:
  • Proven protection for up to 10,000 miles
  • Engineered for use with synthetic or conventional motor oils
  • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
  • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
See More

Mr. Gasket – Starter Motor Heat Shield (Part No.3678)

Starter Motor Heat Shield

from

$43.99
Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.

Product Features:
  • Designed to prevent starter overheat due to extreme exhaust temperature
  • Heat resistant material sandwiched between 2 aluminum plates
  • Protects Starter From High Temperatures
  • Made Of 2 Sheets Of Aluminum Heat Resistant Center
  • Natural Finish
See More

MSD Ignition – Distributor; Street Fire; GM V8 Vortec; 96-00 (Part No.5592)

Distributor; Street Fire; GM V8 Vortec; 96-00

from

$373.99
These Street Fire distributors are ready to drop into your V8 engine to replace the worn OEM piece. A factory style ignition module is included along with a durable new cap and rotor. GM moved to this distributor in the late 1990s and only used them for a few years. The unique flat cap design acts as a ‘correct-a-cap’ meaning that the even number spark plug wires are all on the passenger side while the odd numbers are all on the driver’s side.

Product Features:
  • Great OEM Update; w/Performance Upgrades
  • Unique Flat Cap Design Acts As A Correct-A-Cap
  • Odd Wires On Driver Side; Even On The Passenger
  • Perfect For Budget Minded Enthusiasts
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Accel – High Performance Distributor Cap for Chevy/GMC Vortec V8 (Part No.120141)

High Performance Distributor Cap for Chevy/GMC Vortec V8

from

$89.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Brass inserts provide for high spark energy flow
  • Polyester Glass Filled For Durability
  • Heavy duty for maximum energy transfer
See More

Edelbrock – Water Pump for 1988 and later C/K pickups in Polished Finish (Part No.8863)

Water Pump for 1988 and later C/K pickups in Polished Finish

from

$397.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mr. Gasket – Enhancement Products (Part No.8824)

Enhancement Products

from

$61.99
Replace your stock black engine pulleys with a pair of chrome plated steel pulleys from Mr. Gasket. The pulleys are highly polished then chrome plated for lasting beauty.

Product Features:
  • Highly polished for lasting beauty
See More

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

Mod HEI Dust Cover, V8 & Odd Fire V6

from

$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:
  • Externally mounted coil
  • Increases reliability
  • Increase performance
  • High quality plastic
  • Resist spark loss
  • Use brass conductors
  • Low resistance connections
  • No modifications
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Dynomax – 45212 Exhaust Tail Pipe (Part No.45212)

45212 Exhaust Tail Pipe

from

$74.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Popular 1990 Chevrolet C1500 Performance and Racing Products Categories

1990 Chevrolet C1500 Performance and Racing Products

You count on your 1990 Chevrolet C1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 265 Performance and Racing Products ranging in price from $5.99 to $999.99, you’re sure to find everything you need for your 1990 Chevrolet C1500.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 26 different brands like Mr. Gasket, Accel, and Energy Suspension. 1990 Chevrolet C1500 Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 923 extensive product reviews on 1990 Chevrolet C1500 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Ultra-Seal Intake Manifold Gasket with Silicone Beading with 4.3 stars and GM 1984-95 Remote Supercoil with 3.9 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1990 Chevrolet C1500 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1990 Chevrolet C1500

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Chevrolet C1500 running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Accel, Energy Suspension, and even more.

Popular Flowtech Performance and Racing Products

You’ll find popular Flowtech brand products across Performance Exhaust Products. All are waiting to get your 1990 Chevrolet C1500 back on the road. Some of the top-rated Flowtech products in these categories are:
Real-Seal; Header Gasket
from $85.39
(1)
Real-Seal; Header Gasket
Performance Exhaust Manifold Gaskets

Top-Rated Accel Performance and Racing Products


If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1990 Chevrolet C1500, and some of our most reviewed Accel parts include:
HEI Distributor Cap & Rotor Kit - Tan - Chevrolet V8
from $47.49
(81)
HEI Distributor Cap & Rotor Kit – Tan – Chevrolet V8
Performance Distributor Cap and Rotor Kits
High-Performance Distributor Rotor for GM 4.3L-7.4L Engines
from $29.49
(37)
High-Performance Distributor Rotor for GM 4.3L-7.4L Engines
Performance Distributor Rotors
High Performance Distributor Cap for Chevy/GMC Vortec V8
from $89.99
(32)
High Performance Distributor Cap for Chevy/GMC Vortec V8
Performance Distributor Caps

FAQs for 1990 Chevrolet C1500 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1990 Chevrolet C1500?

Out of 265 Performance and Racing Products for the 1990 Chevrolet C1500, the most popular in our inventory are:
High Performance Transmission Mount for Street & Racing Vehicles
from $41.99
(17)
High Performance Transmission Mount for Street & Racing Vehicles
Performance Engine and Transmission Mounts
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

What are the top-rated 1990 Chevrolet C1500 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1990 Chevrolet C1500 based on customer reviews/ratings are:
Ultra-Seal Intake Manifold Gasket with Silicone Beading
from $31.99
(18)
Ultra-Seal Intake Manifold Gasket with Silicone Beading
“Can’t go wrong with Mr Gasket”
GM 1984-95 Remote Supercoil
from $79.99
(15)
GM 1984-95 Remote Supercoil
“Works great!”
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
from $20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
“Put new headers on motor”