1989 Jeep Cherokee Drive Shafts and Axles

Essential 1989 Jeep Cherokee Drive Shafts and Axles

Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5"

from

$5.99
Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

Product Features:
  • Screw in axle stud for AMC Model 35
  • 1/2″ x 20 thread
  • 1.5″ long
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Yukon Gear – Yoke For Model 35 With A 1310 U/Joint Size (Part No.41098)

Yoke For Model 35 With A 1310 U/Joint Size

from

$115.99
Yukon yoke for Model 35 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits AMC Model 35
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-204)

Rear Drive Shaft: Adjustable

from

$611.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub) (Part No.33266)

Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub)

from

$6.99
Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).

Product Features:
  • Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50
See More

Crown Auto Jeep Replacmnt – OE Replacement, Dana 35 (Part No.8134036K)

OE Replacement, Dana 35

from

$46.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Disconnect Axle Pilot Bearing For Dana 30, 44 & 60, 0.813" O.D. (Part No.18050)

Disconnect Axle Pilot Bearing For Dana 30, 44 & 60, 0.813" O.D.

from

$17.99
Disconnect axle pilot bearing for Dana 30, 44 & 60, 0.813″ O.D.

Product Features:
  • Axle pilot bearing
  • Fits Dana Spicer 44 with disconnect axles
  • 0.813″ O.D.
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Yukon Gear – Inner Axle Dust Shield For Dana 30 (Part No.33442)

Inner Axle Dust Shield For Dana 30

from

$8.99
Product Features:
  • Inner axle dust shield
  • Fits Dana Spicer 30
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Yukon Gear – Model 35 C/Clip (Part No.33076)

Model 35 C/Clip

from

$10.99
Model 35 C/clip.

Product Features:
  • c-clip for AMC Model 35
See More

Crown Auto Jeep Replacmnt – Black (Part No.52070427AB)

Black

from

$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Crown Auto Jeep Replacmnt – Red (Part No.83503504)

Red

from

$10.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82504)

CV Axle Shaft Assembly

from

$94.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Omix – CV Axle (Part No.16523.18)

CV Axle

from

$602.99
Has your front axle shaft or U-joint failed? Omix-ADA offers complete front Jeep axle shaft assemblies providing everything you need for a simple installation. Slide the old parts out and slide the new parts in. You’ll be back on the road in no time.

Product Features:
  • Right Side
  • With ABS
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

USA Standard Gear – 4340 Chrome-Moly Replacement Axle For Dana 30, XJ/TJ/YJ Outer Stub, 27Spl, Uses 5-760X U/Joint (Part No.35084)

4340 Chrome-Moly Replacement Axle For Dana 30, XJ/TJ/YJ Outer Stub, 27Spl, Uses 5-760X U/Joint

from

$214.99
Product Features:
  • Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
  • 4340 Chromoly
  • Outer stub
  • 27 spline
  • 6.11″ from end of splines to center of u-joint bore
See More

Yukon Gear – 8.31" 27Spline 297X 95 & Up Wrangler Stub For Hub Conv – Only (Part No.21341)

8.31" 27Spline 297X 95 & Up Wrangler Stub For Hub Conv - Only

from

$408.99
Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1995 and up Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-2146)

Oil Seal

from

$4.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Outer Axle Seal For Set9 (Part No.30019)

Outer Axle Seal For Set9

from

$21.99
Outer axle seal for set9, fits 0.375 applications.Yukon Mighty seal.

Product Features:
  • Rear outer axle seal
  • Fits Set9 bearing
See More

National – Bearings (Part No.206-S)

Bearings

from

$28.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)

Axle Bearing Retainer Plate For Dana 44 TJ Rear

from

$19.99
Product Features:
  • Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
  • 3/8″ bolt holes
  • 1 5/8öx3 3/16ö bolt pattern
See More

Omix – Axle Shaft Bearing Retainer Ring (Part No.16560.38)

Axle Shaft Bearing Retainer Ring

from

$14.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rear
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – OE Replacement, Dana 44 (Part No.83503077)

OE Replacement, Dana 44

from

$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

1989 Jeep Cherokee Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1989 Jeep Cherokee. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 72 different Drive Shafts and Axles in our inventory ranging from $1.99 to $947.99. That means you can find the exact parts or products you need to keep that 1989 Jeep Cherokee running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Jeep Cherokee. Spicer, National, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1989 Jeep Cherokee, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 497 reviews in this category, some of the top rated parts include Constant Velocity Axle Assembly with 5.0 stars and Multi Purpose Seal with 4.5 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1989 Jeep Cherokee rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1989 Jeep Cherokee Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Jeep Cherokee demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Cherokee the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1989 Jeep Cherokee, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

Top 1989 Jeep Cherokee Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 1989 Jeep Cherokee. Popular Carquest Premium parts include:
CV Axle Shaft Assembly
from $94.99
(14)
CV Axle Shaft Assembly
Drive Shaft and Axles
CV Axle Shaft Assembly
from $106.99
(12)
CV Axle Shaft Assembly
Drive Shaft and Axles

FAQs for 1989 Jeep Cherokee Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1989 Jeep Cherokee?

Out of 72 Drive Shafts and Axles for the 1989 Jeep Cherokee, the most popular in our inventory are:
Multi Purpose Seal
from $17.49
(4)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $18.99
(14)
Multi Purpose Seal
Axle Shaft Seals
Bearings
from $15.49
This product is not rated
Bearings
Drive Shaft Bearings

What are the top-rated 1989 Jeep Cherokee Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1989 Jeep Cherokee based on customer reviews/ratings are:
Constant Velocity Axle Assembly
from $39.99
(2)
Constant Velocity Axle Assembly
“Good price. Good rebuild worked great.”
Multi Purpose Seal
from $18.79
(2)
Multi Purpose Seal
“So far so good with the install in the Jeep wrangler. Not the easiest to install, i would recommend reading some Jeep reviews about how to seat this.”
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”