1989 Ford Mustang Drivetrains

Essential 1989 Ford Mustang Drivetrains

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Mr. Gasket – Rear End Gasket – Ford 9" – Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability (Part No.82)

Rear End Gasket - Ford 9" - Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability

from

$21.79
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Trac Loc Spring For Ford 9" & 8"

from

$8.99
Product Features:
  • Trac Loc spring for Ford 8″ and 9″
See More

Yukon Gear – Crush Sleeve (Part No.33085)

Crush Sleeve

from

$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:
  • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
  • 0.480″ tall
See More

Yukon Gear – Lightweight Steel Spool For Ford 9" With 31 Spline Axles (Part No.32046)

Lightweight Steel Spool For Ford 9" With 31 Spline Axles

from

$313.99
Yukon Performance 2-1/8″ deck lightweight steel spool for 9″ Ford with 31 spline axles. Spool uses 1.785″ journal bearings. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Lightweight design
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

National – Bearings (Part No.201-CC)

Bearings

from

$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size (Part No.41049)

Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size

from

$209.99
Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)

Ring Gear Bolt

from

$1.99


Product Features:
  • Ford 7.5″, 8.8″ Ring Gear Bolt
See More

KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG4521)

High Pressure Monotube Gas Shock for Cars and Trucks

from

$80.99
Product Features:
  • Adds up to 25% more damping performance over original equipment shocks
  • Vehicle specific components and valving
  • High gas pressure design provides instant, extra control
  • Monotube design outperforms all other standard shock absorbers
  • Unique, air-free, hydraulic unit eliminates performance fade
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Pro-King – Rear Axle Shaft Kit (Part No.AXK-213)

Rear Axle Shaft Kit

from

$242.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • High strength steel
  • Dual heat treating process
See More

Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)

Ford 7.5", 8", 8.8", & 9" Axle Stud

from

$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.

Product Features:
  • Axle stud for Ford 7.5″, 8.8″ and 9″
  • 1/2″ x 20 thread
  • 1 7/8″ long
  • 29/64″ shoulder length
See More

Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1460M)

Engine Auxiliary Shaft Bearing Set

from

$22.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

National – Bearings (Part No.HM89443)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Driveworks – Oil Seal (Part No.S-4278)

Oil Seal

from

$9.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1011-B)

RngPnnInstlKt

from

$48.99
RngPnnInstlKt

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

USA Standard Gear – Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design (Part No.39018)

Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design

from

$249.99
Product Features:
  • Spider gear kit
  • Fits Ford 9″ 31 spline open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Un-Notched Cross Pin Shaft For 7.5" Ford – Oem, Not Auburn Gear (Part No.33330)

Un-Notched Cross Pin Shaft For 7.5" Ford - Oem, Not Auburn Gear

from

$36.99
Un-notched cross pin shaft for 7.5″ Ford. OEM, not Auburn gear.

Product Features:
  • Cross pin shaft for Ford 7.5″
  • 3.45 and down ratios only
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Yukon Gear – Pilot Bearing For Ford 8" (Part No.18043)

Pilot Bearing For Ford 8"

from

$40.99
9.25 Chrysler FRONT PINION KIT , 03 & UP DODGE TRUCK .

Product Features:
  • Pilot bearing
  • Fits Ford 8″
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" In A 4.11 Ratio (Part No.24097)

High Performance Ring & Pinion Gear Set For Ford 8.8" In A 4.11 Ratio

from

$369.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Ford 8.8″
  • 8.80″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 4.11 ratio
See More

Pro-King – Differential Internal Nest Kit (Part No.761A717)

Differential Internal Nest Kit

from

$309.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R9R325)

Differential Bearing Kit - Koyo

from

$117.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • 9″ BEARING KIT FOR 3.25 HOUSING
See More

Yukon Gear – Master Overhaul Kit For Ford 9" LM102910 Differential (Part No.14052)

Master Overhaul Kit For Ford 9" LM102910 Differential

from

$282.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses carrier bearings & races with an I.D. of 1.780″ and an O.D. of 2.891″. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Ford 9″ with LM102910 carrier race
  • Included are Timken bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Popular 1989 Ford Mustang Drivetrains Categories

1989 Ford Mustang Drivetrains

You count on your 1989 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 290 Drivetrains ranging in price from $0.99 to $2,064.99, you’re sure to find everything you need for your 1989 Ford Mustang.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Moog, Valvoline, and Driveworks. 1989 Ford Mustang Drivetrains start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,789 extensive product reviews on 1989 Ford Mustang Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Bearings with 4.2 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1989 Ford Mustang below to get started!

Top-Rated Drivetrains Brands For Your 1989 Ford Mustang

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Ford Mustang running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.

Popular Powertrax Drivetrains

You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1989 Ford Mustang back on the road. Some of the top-rated Powertrax products in these categories are:
Lock Right Locker
from $444.99
(1)
Lock Right Locker
Differential Open Unit and Components

FAQs for 1989 Ford Mustang Drivetrains

What are the most purchased Drivetrains for the 1989 Ford Mustang?

Out of 290 Drivetrains for the 1989 Ford Mustang, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $25.99
(143)
Greaseable Premium Universal Joint
U-Joints
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Housing Cover Gaskets

What are the top-rated 1989 Ford Mustang Drivetrains?

Top-rated Drivetrains for your 1989 Ford Mustang based on customer reviews/ratings are:
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”
Bearings
from $16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
Oil Seal
from $5.49
(38)
Oil Seal
“Exact fit , price was good”