1989 Chevrolet LLV Steering and Chassis Parts

Essential 1989 Chevrolet LLV Steering and Chassis Parts

MOOG – Tie Rod End (Part No.ES2034RLT)

Tie Rod End

from

$43.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Lares – Remanufactured Power Steering Gear Box (Part No.1038)

Remanufactured Power Steering Gear Box

from

$356.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Powercraft – Steering Gear Complete Rebuild Kit (Part No.8522)

Steering Gear Complete Rebuild Kit

from

$124.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Ball Joint (Part No.K6145T)

Ball Joint

from

$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Driveworks – Ball Joint (Part No.DW-K6145T)

Ball Joint

from

$44.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

Powercraft – Pump Complete Rebuild Kit (Part No.8561)

Pump Complete Rebuild Kit

from

$67.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)

Steering Gear Input Shaft Seal Kit

from

$9.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)

Chassis Wiring Harness Connector

from

$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Powercraft – Pump Seal Kit (Part No.8554)

Pump Seal Kit

from

$21.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Lares – Remanufactured Power Steering Pump (Part No.2326)

Remanufactured Power Steering Pump

from

$58.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Carquest Premium – Return Hose Assembly (Postal) (Part No.37171)

Return Hose Assembly (Postal)

from

$77.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

MOOG – Pitman Arm (Part No.K440031)

Pitman Arm

from

$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy duty design
  • Engineered steel composition results in a stronger component
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered to meet or exceed OE part performance
See More

MOOG – Stabilizer Bar Link Kit (Part No.K5254)

Stabilizer Bar Link Kit

from

$23.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Incorporates proven design and engineering features
See More

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)

Steering Gear Complete Pitman Shaft Seal Kit

from

$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11607)

Conrol Arm W/Bj

from

$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Dorman – Right Steering Knuckle (Part No.697-905)

Right Steering Knuckle

from

$934.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
  • Reliable fit – precision-engineered to match the dimensions of original components
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Back Up Light Connector

from

$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MOOG – Caster/Camber Shim (Part No.K100191)

Caster/Camber Shim

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Idler Arm (Part No.K6187T)

Idler Arm

from

$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Driveworks – Tie Rod End (Part No.DW-ES2034RLT)

Tie Rod End

from

$28.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

National – Bearings (Part No.DB-53313)

Bearings

from

$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Rare Parts – Sway Bar Bushing (Part No.RP15271)

Sway Bar Bushing

from

$23.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Link Kit (Part No.RP15744)

Sway Bar Link Kit

from

$15.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Powercraft – Steering Gear Major Seal Kit (Part No.8521)

Steering Gear Major Seal Kit

from

$31.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

1989 Chevrolet LLV Steering and Chassis Parts

You count on your 1989 Chevrolet LLV to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 88 Steering and Chassis Parts ranging in price from $5.79 to $951.99, you’re sure to find everything you need for your 1989 Chevrolet LLV.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Driveworks, Imperial, and Moog. 1989 Chevrolet LLV Steering and Chassis Parts start as low as $5.79!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 641 extensive product reviews on 1989 Chevrolet LLV Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Filter with 3.8 stars and Ball Joint with 3.9 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1989 Chevrolet LLV below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1989 Chevrolet LLV

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Chevrolet LLV running right for years to come. In our inventory you’ll find brands like Driveworks, Imperial, Moog, and even more.

Popular National Steering and Chassis Parts

You’ll find popular National brand products across Steering Shafts. All are waiting to get your 1989 Chevrolet LLV back on the road. Some of the top-rated National products in these categories are:
Multi Purpose Seal
from $31.49
(1)
Multi Purpose Seal
Pitman Shaft Seal Kits

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1989 Chevrolet LLV, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1989 Chevrolet LLV Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1989 Chevrolet LLV?

Out of 88 Steering and Chassis Parts for the 1989 Chevrolet LLV, the most popular in our inventory are:
Stabilizer Bar Link
from $12.99
(56)
Stabilizer Bar Link
Sway Bar Link Bushing Kits
Stabilizer Bar Link Kit
from $23.99
(123)
Stabilizer Bar Link Kit
Sway Bar Link Kits
Stabilizer Bar Link
from $17.79
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated 1989 Chevrolet LLV Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1989 Chevrolet LLV based on customer reviews/ratings are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
“Looks good and fits well, plus LTW”
Ball Joint
from $28.49
(29)
Ball Joint
“Easy to install”
Ball Joint
from $52.99
(25)
Ball Joint
“Another great moog product.”