1989 Chevrolet C2500 Transmission Parts

Below you will find various in-demand Chevrolet Transmission Parts, components and accessories for your 1989 C2500. Advance Auto Parts has popular C2500 parts like Transmission Cooler and Parts, Transmission Seals, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other C2500 model years including 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 and more. Select a category of 1989 Chevrolet C2500 Transmission Parts below and start saving instantly.

Popular 1989 Chevrolet C2500 Transmission Parts Categories

Axle Output Shaft Bearings

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Transmission Solenoids

Transmission Shift Cables

Automatic Transmission Governors

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Transmission Dipsticks

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Detent Cables

Automatic Transmission Oil Pump Seals

Transmission Modulator Valves

Pinion Seals

Miscellaneous Shift Shaft Seals

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Gear Shift Lever Bushing

Miscellaneous Automatic Transmission Seals

Transmission Shift Kits

Input Shaft Bearings

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Selector Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Automatic Transmission Detent Cable Seals

Automatic Transmission Torque Converter Connectors

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Fluid Filler Tube Seals

Automatic Transmission Oil Pump O-Rings

Clutch Fork Shaft Seals

Automatic Transmission Speedometer Pinion Seals

Front Pump Seals

Automatic Transmission Shifter Cable Brackets

Remanufactured Automatic Transmissions

Torque Converter Bearings

Automatic Transmission Friction Discs

Manual Transmission Clutch Start Switch

Essential Transmission Parts for 1989 Chevrolet C2500s

from

$7.49

SHAFT SEAL

from

$108.99

What better way to check you oil level by using one of B&M’s transmission fluid dipsticks? The cap screws into the tube and is O-ring sealed, while the base of the tube has a sealing grommet where it goes into the transmission.

Product Features:

Automatic Transmission Dip Stick

from

$3.49

AT DETENT CABLE SEAL

from

$28.99

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
Replacement for Bandit shifters

from

$109.99

AUTOMATIC TRANS PART

from

$41.58

Differential Bearing

from

$79.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$39.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$1914.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$22.99

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$5.99

AT OIL PUMP ORING

from

$87.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$429.99

The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H

Product Features:

All One-Handed
Reverse Lockout Meets NHRA And IHRA Requirements
Mount Directly To Floor/Chassis/Or w/Quick Release
Ultimate For Powerglide Applications
Lightweight Brushed Alum. Cover
Cover Removed Quickly and Easily
Includes 5 Ft. Super Duty Race Cable
Quick Change Plate Design

from

$10.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$4.99

Product Features:

Brand may vary by location

from

$37.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$36.99

REUSABLE AT PAN GSKT

from

$39.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.99

AT EXT HOUSING SEAL

from

$37.49

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

All parts are calibrated and tested to match the OE part
Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$10.49

Product Features:

Brand may vary by location

from

$90.99

The B&M Shift Plus, recalibrates your transmission’s hydraulic system electronically which firms up the shifts and reduces heat and slippage. A simple flip of the switch allows you to choose which shift firmness setting you want to run.

Product Features:

Installs In Minutes
Reduces Slippage and Heat
50 State Emissions Legal
Recalibrates Hydraulic System
Recalibrates Electronically
Fun and Pleasurable Drive
Extends Transmission Life
Simple Flip Of Switch

from

$10.99

AT FRT PUMP BUSHING

from

$156.99

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Does not include steels or filter

from

$22.99

Manufactured with premium-grade steel, National® cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$1150.00

Hays Race Tq Convtr Th400 42-5000 Stall

from

$27.99

ACDelco GM Original Equipment Parking / Neutral Position and Back Up Light Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Upgrade your 1989 Chevrolet C2500 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1989 Chevrolet C2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your C2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 175 Transmission Parts for the 1989 Chevrolet C2500, designed to meet your needs without breaking the bank. From Transmission Cooler and Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1989 Chevrolet C2500 at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $1,634.99, with an average price of $146.57. Our 175 Transmission Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1989 Chevrolet C2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Chevrolet C2500, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, National, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and National also bring quality to the table, with Transmission Parts available starting at $6.99, and at an average 4 stars rating. With 2,287 customer reviews and counting, our 1989 Chevrolet C2500 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Chevrolet C2500 is always ready to roll. We’re committed to providing you with everything you need to keep your C2500 in top shape, all in one place. Start shopping confidently below for your 1989 Chevrolet C2500!

Best-Selling Transmission Cooler and Parts for 1989 Chevrolet C2500s

Enhance the driving experience in your Chevrolet with 13 quality Transmission Cooler and Part components, starting at $39.99.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$145.99

Oil cooler 1-1/2″ x 12″ x 15-1/8″. Extra heavy-duty. Designed for severe-duty transmission oil cooling applications.

Product Features:

Imperial Econo-Kool® tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.

Most Popular 1989 Chevrolet C2500 Transmission Seals

Customize your Chevrolet with 26 Transmission Seals products like Transmission Seals and O-rings, Pinion Seals, and Manual Transmission Output Shaft Seals, all priced under $56.99.

show more show less

from

$12.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$4.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

AT SEL SHAFT SEAL

from

$12.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$17.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$24.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$24.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$5.99

AT DPSTK TUBE SEAL

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$1.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$3.49

AT DETENT CABLE SEAL

from

$10.99

AT EXT HOUSING SEAL

from

$7.99

AT EXT HOUSING SEAL

from

$13.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$14.99

CLUTCH FORK BOOT

from

$2.49

Product Features:

Brand may vary by location

from

$5.99

AT SPD PINION SEAL

from

$14.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

AT EXT HOUSING SEAL

from

$56.99

REPAIR SLEEVE

from

$14.99

AT OIL PUMP SEAL

from

$8.69

SHAFT SEAL

from

$8.49

Product Features:

Brand may vary by location

from

$7.49

SHAFT SEAL

Top Picks for 1989 Chevrolet C2500 Automatic Transmission Parts

Upgrade Chevrolet C2500s with top-quality Automatic Transmission Parts parts, including 26 OEM and aftermarket selections for your 1989 model.

show more show less

from

$3.99

AT SOLENOID SEAL

from

$28.99

Cable Bracket, GM APPLICATION: For TH400, 350, 250, 200, 700R4, 2004R transmissions.

Product Features:

Shifter Service Parts

from

$34.49

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$33.49

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$43.99

B&M’s vacuum modulator is fully adjustable, this allows you to tailor your shift points to within a range of 2-4 mph. Comes preadjusted for normal shift points. For TH350 and TH400.

Product Features:

Fully Adjustable
Allows You To Tailor Shift Points
Comes Supplied Pre-Adjusted

from

$22.99

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$25.99

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$41.49

ATP Universal Fit Detent Cables are designed to cover many applications and are no compromise replacement parts

Product Features:

Includes brackets, grommets, etc to match original
Fits many GM transmissions
Adjustable

from

$5.99

AT OIL PUMP ORING

from

$33.99

AUTO TRANS BAND

from

$11.99

AT FRT PUMP BUSHING

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$48.99

AT MODULATOR VALVE

from

$17.99

AT MODULATOR VALVE

from

$10.99

AT FRT PUMP BUSHING

from

$48.99

AT/HARNESS VSS REPR

from

$1634.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$1609.99

Product might not be available in all states due to local laws.

from

$1339.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1339.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$109.99

This kit allows you to adjust the shift points of your transmission after it is installed in your vehicle. The Governor Recalibration Kit is very useful if you have a vehicle that is very light; has a low rear-end gear ratio.

Product Features:

Adjust Shift Points Of Transmission
Useful For Light Vehicles
For Low Rear End Gear Ratio
Or Useful If It Is Conversion

from

$108.99

Automatic Transmission Dip Stick

from

$84.99

When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission’s kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.

Product Features:

Allows High Speed Cruise
Cruise In Overdrive
Prevents Part Throttle Kickdown
Quick Installation

from

$58.99

These universal fit adjustable cables will work in 95% of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Product Features:

Universal Fit Adjustable
Less Expensive Than OE Models
Ease Trans. Swap Installation

from

$8.99

AT CLUTCH PLATE

In-Demand Automatic Transmission Pan and Gaskets for 1989 Chevrolet C2500s

Select from 19 premium Automatic Transmission Pan and Gaskets parts for your 1989 Chevrolet C2500, with prices ranging from $6.99 to $349.99.

show more show less

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$65.99

Stock depth chrome plated automatic transmission pans are complete with drain plug, washer and gasket. Matching dipsticks with tubes sold separately.

Product Features:

Stock depth and capacity
Chrome plated
Includes drain plug/washer/gasket

from

$10.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$10.99

AT OIL PUMP GASKET

from

$65.99

These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Includes drain plug, gasket and hardware.

Product Features:

Overall Height: 2.0″
Stock Depth and Capacity
Includes: Drain Plug, Washer & Gasket

from

$13.99

AT OIL PAN GASKET

from

$30.19

Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.

Product Features:

High density cork-nitrile rubber blend
Excellent compressibility and high recovery to create a positive seal
Excellent Compressibility

from

$30.19

Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.

Product Features:

High density cork-nitrile rubber blend
Excellent compressibility and high recovery to create a positive seal
Excellent Compressibility

from

$37.69

These transmission oil pan gaskets are made with a glass-filled nylon carrier with molded rubber on both the top and bottom of the gasket. Each bolt hole has a torque limiter that helps to avoid over-torqueing the bolts for a reliable seal. These gasket are reusable and can be cleaned using soap and water. Ideal for applications that require frequent service. Made in the USA.

Product Features:

Molded rubber over glass filled nylon carrier
Reusable ¿ easy cleaning w/ soap & water
Reusable ┐ easy cleaning w/ soap & water
Torque Limiters ¿ helps to avoid over torqueing gaskets
Torque Limiters ┐ helps to avoid over torqueing gaskets
Applications for many common transmissions
Ideal for applications that require frequent service
Made in the USA

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$349.99

B&M Cast Aluminum Transmission Pans are constructed of thick A356.0-T6 cast aluminum. Designed to fit a wide range of cars and trucks with TH700-R4, 4L60, 4L60E & 4L65E transmissions, these deep pans significantly increase the fluid capacity and dissipate heat much faster to prolong the life of the transmission and related components. Additional features include an engraved B&M logo, drain port, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$259.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan! Adds 2 additional quarts to the system.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs

from

$113.99

B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Chrome Plated Steel

from

$113.99

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Chrome Plated Steel

Most Sold 1989 Chevrolet C2500 Transmission Mounts

Explore our best-selling Chevrolet parts for the 1989 C2500 among 7 OEM and aftermarket options starting from $6.49.

show more show less

from

$6.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 77-82; CHEV 78-05; GMC 81-99; OLDS 78-83; PONT 75-93;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1975-2005
Weight approx: 1 Lbs
HEIGHT: 1.95 INCH / 49.53 MM WITHOUT STUD
STUD AND BOLT HOLES INLINE
STUD: M10-1.50
MOUNT HOLES: 3.75 INCH / 95.25 MM

from

$7.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 77-77; CHEV 69-95; GMC 78-95; OLDS 71-81; PONT 75-87;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1969-1995
Weight approx: 1 Lbs

from

$9.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 72-96; CADI 86-96; CHEV 82-05; GMC 83-04; ISUZU 97-00;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1972-2005
Weight approx: 2 Lbs

from

$9.79

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 68-77; CHEV 82-07; GMC 85-91; OLDS 77-79; PONT 76-92;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-2007
Weight approx: 2 Lbs

from

$15.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 79-91; GMC 76-91;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1976-1991
Weight approx: 2 Lbs
MATERIAL: RUBBER,STEEL
MOUNT HOLES CENTER TO CENTER: 4.25 INCH / 107.95 MM

from

$44.99

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$89.99

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

Top-Rated Transmission Parts Brands For Your 1989 Chevrolet C2500

Shop for the best-rated brands offering Transmission Parts and other products for your 1989 Chevrolet C2500s. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and National, and more. Transmission Parts from these brands that fit a 1989 C2500 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1989 Chevrolet C2500 Transmission Parts

When it comes to maintaining or upgrading your 1989 Chevrolet C2500, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 1989 Chevrolet C2500. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Imperial 1989 Chevrolet C2500 Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 1989 Chevrolet C2500 owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1989 C2500, Advance Auto Parts carries a full inventory of 14 Imperial Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Imperial Transmission Parts range from $14.79 to $145.99, plus, with more than 162 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$145.99

This product is not rated

Transmission Oil Cooler

“”

from
$65.99

This product is not rated

Econo-Kool® Transmission Oil Cooler

“”

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

FAQs for 1989 Chevrolet C2500 Transmission Parts

Which Transmission Parts are best-sellers for 1989 Chevrolet C2500s?

Out of 175 Transmission Parts that fit 1989 Chevrolet C2500s, the following parts are the top sellers:

Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Transmission Oil Pan Gasket (5781647) – $10.99
Cylindrical Bearing (15050070) – $22.99

What’s the price range for 1989 Chevrolet C2500 Transmission Parts?

Transmission Part prices for the 1989 Chevrolet C2500 start at $1.99 and go up to $1,634.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1989 Chevrolet C2500?

The average price for Transmission Parts for the 1989 Chevrolet C2500 is $146.57. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chevrolet C2500 model years?

Yes, we currently carry Transmission Parts for 12 model years of Chevrolet C2500s between 1988 and 2000. Transmission Parts are bought most frequently for the following model years: 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, and 1992.

What are the cheapest Transmission Parts for my 1989 Chevrolet C2500?

The cheapest 1989 Chevrolet C2500 Transmission Parts we carry in stock are:

Oil Seal (5440998) – $1.99
Auto Transmission Shift Shaft Seal (11407786) – $2.49
Oil Seal (5440149) – $3.49
AT DETENT CABLE SEAL (10861026) – $3.49
AT SOLENOID SEAL (11239035) – $3.99

What are the top-rated Transmission Parts that fit the 1989 Chevrolet C2500?

Out of 2,287 reviews by customers, our 1989 Chevrolet C2500 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1989 Chevrolet C2500 and their top-rated products:

Transmission Bearings
- Bearings (5052505) – $14.79
- Cylindrical Bearing (15050070) – $22.99
- Taper Bearing Cone (3277410) – $17.99
Transmission Connectors
- Bearings (5052505) – $14.79
- Cylindrical Bearing (15050070) – $22.99
- Taper Bearing Cone (3277410) – $17.99
Automatic Transmission Pan and Gaskets
- Bearings (5052505) – $14.79
- Cylindrical Bearing (15050070) – $22.99
- Taper Bearing Cone (3277410) – $17.99

What types of Transmission Parts do you sell for my 1989 Chevrolet C2500?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 1989 Chevrolet C2500:

Can I get help with 1989 Chevrolet C2500 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.

What is your return policy for Chevrolet C2500 Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet C2500 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 Chevrolet C2500 Transmission Parts

FAG US – SHAFT SEAL (Part No.SS2114)

B & M – Aluminum Braided Dip Stick, Fits TH-400 Transmission (Part No.22166)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

B & M – Cable Bracket (Part No.30498)

ATP – AUTOMATIC TRANS PART (Part No.CGS-32)

NTN – Differential Bearing (Part No.J7060741150NTN)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 13.5 Quart (Part No.265-810)

ACDelco – Multi-Purpose Pigtail (Part No.PT2834)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260092)

ATP – Automatic Transmission Detent Cable (Part No.Y-228)

ATP – AT OIL PUMP ORING (Part No.SO-21)

Energy Suspension – Transmission Mount (Part No.3.1129G)

B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)

National – Multi Purpose Seal (Part No.6712NA)

Driveworks – Auto Transmission Oil Pump Seal (Part No.S-4598)

Carquest – Automatic Transmission Control Solenoid (Part No.S9811)

ATP – REUSABLE AT PAN GSKT (Part No.JG-142)

NTK – ABS Wheel Speed Sensor (Part No.AU0137)

National – Multi Purpose Seal (Part No.8792S)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

Delphi – Vehicle Speed Sensor (Part No.SS10309)

Driveworks – Tapered Roller Bearing (Part No.S-M-802011)

B & M – ShiftPlus, 4L60E and 4L80E (Part No.70380)

ATP – AT FRT PUMP BUSHING (Part No.CB-4)

Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-865)

National – Cylindrical Bearing (Part No.5707)

Hays – Hays Race Tq Convtr Th400 42-5000 Stall (Part No.97-1D42F)

ACDelco – Park/Neutral Position and Back-Up Lamp Switch (Part No.D2209D)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)

Imperial – Transmission Oil Cooler (Part No.241015)

National – Multi Purpose Seal (Part No.4583)

Driveworks – Oil Seal (Part No.S-9613S)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

National – Multi Purpose Seal (Part No.4528N)

National – Multi Purpose Seal (Part No.3896)

National – Multi Purpose Seal (Part No.2286)

National – Shaft Repair Sleeve (Part No.99138)

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-9449)

National – Multi Purpose Seal (Part No.5208)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

National – Multi Purpose Seal (Part No.410085)

ATP – CLUTCH FORK BOOT (Part No.JO-118)

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

ATP – AT SPD PINION SEAL (Part No.SO-38)

Driveworks – Oil Seal (Part No.S-2286)

Driveworks – Oil Seal (Part No.S-3896)

ATP – AT EXT HOUSING SEAL (Part No.JO-57)

FAG US – REPAIR SLEEVE (Part No.SR3506)

ATP – AT OIL PUMP SEAL (Part No.CO-4)

FAG US – SHAFT SEAL (Part No.SS2802)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-4528-N)

FAG US – SHAFT SEAL (Part No.SS2114)

ATP – AT SOLENOID SEAL (Part No.JO-15)

B & M – Cable Bracket (Part No.30499)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-48)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-28)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

B & M – Modulator (Part No.20234)

ATP – Automatic Transmission Detent Cable (Part No.Y-228)

ATP – Automatic Transmission Detent Cable (Part No.Y-225)

ATP – Automatic Transmission Universal Detent Cable 28 to 48 inches (Part No.Y-752)

ATP – AT OIL PUMP ORING (Part No.SO-21)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)