1989 Acura Legend Fuel and Emissions Systems
More 1989 Acura Legend Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1989 Acura Legend, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1989 Acura Legend Fuel and Emissions Systems
Delphi – Electric Fuel Pump: With Hose Clamps, Hose Piece, Isolator, Pall Nut, Seals (Part No.FE0486)
from
$138.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1010)
from
$111.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
OPT – Fuel Injector Seal (Part No.C1010118656OPT)
from
$2.38
Fuel Injector Seal
Carquest – Fuel Injector Seal Kit (Part No.274621)
from
$20.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- State-of-the-art designs that meet or exceed OE specifications
- Top-of-the-line quality and performance
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Pump Strainer FS2521155 (Part No.FS2521155)
from
$15.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Carquest Premium – Fuel Pump Strainer FS2510488 (Part No.FS2510488)
from
$13.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Santech – Relay (Part No.P202060753SII)
from
$11.64
Relay
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Injector Seal Kit (Part No.AS016)
from
$19.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Beck/Arnley – Fuel Injector O-Ring Kit (Part No.158-0895)
from
$10.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Premium materials provide tight seal for injectors which prevents fuel leaks
- High quality construction for durability
- Constructed to withstand an engine environment
- Application specific for this vehicle
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70978)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1004)
from
$7.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1144)
from
$41.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1134)
from
$39.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)
from
$10.99
None
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Manufactured from durable, long-life materials
- Independently tested for emission control
- Passes all state and federal emissions tests
- Reduces air pollution with proper sealing and venting
Carquest Premium – Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10810)
from
$9.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Beck/Arnley – Relay (Part No.203-0130)
from
$58.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with high quality materials for internal coil and switch
- Includes anti-corrosion terminals
- Constructed to withstand an underhood environment
- Application specific for this vehicle
Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)
from
$1.24
Fuel Injector O-Ring
Ishino – Fuel Injector O-Ring (Part No.C1012404811ISH)
from
$2.29
Fuel Injector O-Ring
Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004276126DOR)
from
$14.92
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.
Product Features:
See More
Product Features:
- Comes with rubber seal or gasket
- Direct replacement for a proper fit every time
- Corrosion-resistant
- Quality-tested for trouble-free performance
DENSO – Oxygen Sensor: 4 Wire, 20.47" Long, Heated, Exact Fit (Part No.234-4065)
from
$68.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: 4 Wire, 22.83" Long, Heated, Exact Fit (Part No.234-4093)
from
$57.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Switching Oxygen Sensor: 4 Wire, 22" Long, Heated, Direct Fit (Part No.24172)
from
$50.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Bosch Oxygen Sensor (Part No.C501051380BOS)
from
$25.82
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4209)
from
$81.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – NTK Oxygen Sensor (Part No.C501062825NTK)
from
$42.01
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted OEM Connector for Easy Installation
Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)
from
$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Popular 1989 Acura Legend Fuel and Emissions Systems Categories
1989 Acura Legend Fuel and Emissions Systems
You count on your 1989 Acura Legend to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 29 Fuel and Emissions Systems ranging in price from $1.24 to $138.99, you’re sure to find everything you need for your 1989 Acura Legend.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 15 different brands like Carquest Premium, Felpro, and Delphi. 1989 Acura Legend Fuel and Emissions Systems start as low as $1.24!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 219 extensive product reviews on 1989 Acura Legend Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack with 4.7 stars and Fuel Injector Seal Kit with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1989 Acura Legend below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1989 Acura Legend
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Acura Legend running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Delphi, and even more.
Popular Beck/Arnley Fuel and Emissions Systems
You’ll find popular Beck/Arnley brand products across Fuel Injectors. All are waiting to get your 1989 Acura Legend back on the road. Some of the top-rated Beck/Arnley products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1989 Acura Legend, and some of our most reviewed parts include:
FAQs for 1989 Acura Legend Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1989 Acura Legend?
Out of 29 Fuel and Emissions Systems for the 1989 Acura Legend, the most popular in our inventory are:
What are the top-rated 1989 Acura Legend Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1989 Acura Legend based on customer reviews/ratings are:
from
$9.49
(3)
Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“But it works perfect and at a ⅓ of the price. Sweet”
